Construction of Entry Gate Ganderbal.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil :

P/L, of dry stone soling duly hand packed for foundation and backfilling with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) all complete.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto Floor V-Level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete.

Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes all complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and fixing 450mm long 16mm threaded anchor bolts (Threaded as per design) incl. cost required nuts/bolts etc fixed in concrete incl. cost of template etc all complete.

Carriage of Material :- Sand/Stone Agg. for an avg. lead of 10 Kms

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Rough chisel dressed all complete.

Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete.40 mm thick all complete.

French spirit polishing, Two or more coats on new works including a coat of wood filler all complete.

Providing and fixing back lit lighting alphabets, extruding 100mm from the main surface (minimum) incl. all fittings complete job measurement to be done on higher side of alphabet.

Providing and laying asphalt roofing comprising of APP/SBS modified bituminous membrane of approved make, minimum 3-4 mm thickness reinforced with non-woven polyester mat, finished with mineral/stone granules on top surface, including surface preparation, primer application, torch on or cold adhesive application as specified, proper overlaps, joints, flashing at parapets, rainwater outlets and termination details complete in all respects as per manufacture's specifications and directions of the Architect/engineer Incharge all complete.

Providing and fixing decorative eaves boarding of first class deodar wood in size of 300mmx100mmx40mm (shafaq type) all necessary fittings/ fixtures all complete.

Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work (Chargul chinar pattern) complete in all respects (Pattern and design should be approved from EIC).

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. NOTE:- To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done all complete

Supply of RGB LED waterproof strip light IP68, IK04, sealed with anti-UV Silicon without color shifting and anti UV aging;, system wattage 65W with minimum system lumens of 350lm/m, operated at DC 24VDC,No of led shall be 98 no/m and shall haveminimum cutting lenth of 10cm.Strip should have Class III for safety use. Beam angles should be >110°, SDCM≤3,with Lead cable (200mm) for easy wiring,CRI 80 for better vivid color rendering. Lifeclass should be at least 50,000 burning hours at L70B50@35°C. Operating temperature should be in the range of -40° to +50°C.Fixture should come with all the necessary acessories such as DMX Decorder ,Power supply, connectors and End Caps. The product should be CB and CE certified and follow EN60598, EN62471, EN62493+IEC62778, CE EMC standards and also compliant to RoHS. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. Philips /LIGHTING TECHONOLOGY / Endo /Regent /Trilux make .The Contracting firm has to submit TDS on OEM Letter head along with LM79/LM80 reports before supply of materials for approval from department .The job further includes OEM Warrenty of Fixture for a period of 5 years for complete replacement if damaged what so ever reason

DMX Encoder

Conider Costing

only for cost ref

SITC of 300mm long RGBW LED Rigid LinearGrazer with System wattage of 3W, min lumen output of 140lm, 45° beam angle complete with power supply, suitable IP66 connectors maximum led power supply, suitable IP66 connectors, luminaire controls via DMX512 with Auto addressing for easy configuration. The connectivity should be of a daisy chain topology, allowing easy installation to form long run lengths. The same shall include Installation clamps, 5core/cat-6 or suitable control cables UV and weatherproof, other required accessories & hardware. The luminaire shall be extruded Aluminium with Electrostatically applied polyester powder coating, silicon gasket and clear tempered glass, minimum dimension of 300mm x 25mm x 35mm (without bracket) and minimum weight of 0.2kg. The Luminaire shall have tilting adjustability +15° to - 90°. The LED luminaire shall have SDCM<4 for white, the life of Luminaire shall be 50000hrs L70B50 at 35deg C.The product should have discreet LED and not 4 in 1 LED & should be with intergral DMX Decorder .The luminaire should be IP66 & IK-06. The operating temperature of Luminaire shall be -40°C to 50°C and storage shall be -40°C to 70°C. The product shall comply to and shall have test repots for IEC 60598-2-5:2015, IEC 60598-1:2014 + A1, IEC TR 62778:2014 (for LED chips), EN IEC 55015:2019+A11, EN 61547:2009, EN 61000-3-2:2019, EN 61000-3-3:2013, IS 10322 (Part 5/Sec5):2013, LM80. Manufacturers self-declaration shall be uploaded along with the technical bid confirming to compliance of CE Declaration of Conformity, CQC declaration of conformity, RoHS compliance & ASTM B117 for 500 hours. The bidder should also submit the BIS for proposed family of product.Lumineres ,control gear and Accesorries shall be of the same make. Philips /LIGHTING TECHONOLOGY / Endo /Regent /Trilux make .The Contracting firm has to submit TDS on OEM Letter head along with LM79/LM80 reports before supply of materials for approval from department .The job further includes OEM Warrenty of Fixture for a period of 5 years for complete replacement if damaged what so ever reason

Supply of RDM-6Wall Splitter,should be able to provide 6-output DMX/RDM splitter with DMX/RDM pass-through supporting bi-directional communications for discovery, addressing and DMX control of Ethernet/DMX products.This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6x32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Surface or DIN-rail mountable,Isolated DMX/RDM Input/Outputs,Automatic switching between DMX and RDM mode for auto-discovery, Environment-IP20, Interior applications,Finish/Color-Polycarbonate, Certification: CE Certified.

SITC • Addressing Kit shall automatically write address to a whole group of interconnecting luminaires within minutes. It shall be Miniature industrial design, compact size and touch screen. It can be powered by a power bank with a Micro-B type USB port for on-site programming and testing after installation. The housing shall be extruded Aluminum with black finish weighing approx. 0.2Kg with temperature range -10°C to 40°C, input voltage of 6-24V DC and humidity range of 10 to 90% (no condensation). The product shall be compact in size, compatible with multiple types DMX512 chips, with Built-in test animation effects, SD card slot to store animation and scenes. The addressing kit shall support standard RDM protocol, searching for RDM luminaires and static detection, Color-pick functions, and can be powered by Micro-B type USB power supply. Philips /LIGHTING TECHONOLOGY / Endo /Regent /Trilux make .The Contracting firm has to submit TDS on OEM Letter head along with LM79/LM80 reports before supply of materials for approval from department .The job further includes OEM Warrenty of Fixture for a period of 5 years for complete replacement if damaged what so ever reason

Programming, testing and commissioning of RGB lights with schene creation (5-7Nos)

Supply , Installation and testing of out door type DOUBLE DOOR Main Controlling Panel Fabricated from heavy guage sheet steel dully powder coated with all allied accessories as per IS-61439 with p/f of following devices 125 Amps DP (10KA) MCCB of legrend /L&T / Scheinder / Simens/abb make =1 NO 200 Amps P&N Colour coded Bus bar = 1 Set Multi functional meter along phase indicators = 1 set 32 Amps DP MCB (10KA) = 6 NO'S 10-16 SPN MCB (10KA) = 6 nO'S Astro timmer with contactor assembly having operation from Dawn to Dusk aloso having auto & manual operation of legrend /GI /EQ as approved by EIC . The Panel should have space for housing of 10 KV AVR (out door type) excl cost cost of AVR The job includes angle iron Stand whose legs are grouted in cement concrete block including cost of civil materials SLD to be approved by department before fabrication of panel

Supply , Installation and testing of 10 KVA OUT DOOR TYPE Servo controlled automatic Voltage stabilizer buck boost type operating from AC input voltage of 90-260 Volts thereby producing output voltage of 230 volts +- 2% with p/f of All protection devices like under voltage ,over voltage , TDR , Neitral failure complete including first filling of transformer oil of casco /Alba / cHINAR / .The job includes p/f of 63 Amps F.Pole Bypass Change over Switch

Supply and laying of 2.5 Sq mm 3 core PVC insulated unarmoured multistrand copper cable as per site requirement

Supply and laying of 6 Sq mm 5 core PVC insulated unarmoured copper cable as per site requirement

Supply and laying of Armoured CAT 6 cable as per site requirement

Supply & Installation of Chemical EARTHING with GI Strip to earth electrical pannel

Supply and fixing IP 67 boxes with all accessories as per site requirement

Customised Al Profiles as Per site Conditions

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Single pole and neutral

MCB DP 63 amp 10 K

Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way (4 + 18), Double door

S/L , testing and commissioning of PVC alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size.

a) 50 sq.mm 2 core

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level ii) including excavation and refilling the trench of hard /Soft Soil / road cuts but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and Laying of medium Class 25/32 mm dia pvc conduits with allied accessories to be recessed completed