P.S.L.L. & J. 200 mm, 110 mm ,90 mm dia 6kg/cm2 PVC Pipeline at Nadapa, Kandherai , Modasar, and Construction of Pump Cabin at Nadapa and Modsar and Lodai, Electrification at different location for Bhuj Part-1 RWSS under M & R programme 2026-27.

Name of work :- P.S.L.L. & J. 200 mm, 110 mm ,90 mm dia 6kg/cm2 PVC Pipeline at Nadapa, Kandherai , Modasar, and Construction

of Pump Cabin at Nadapa and Modsar and Lodai, Electrification at different location for Bhuj Part-1 RWSS under M & R programme

:: SCHEDULE - B ::

Est. Unit Item Description Rate Labour SAS 1% Rate with Per Amount

3540.00 Rmt Item No.1 199.00 Rmt

Providing and supplying in standard length ISI mark rigid unplasticised

PVC pipes suitable for potable water with ring fit joint including cost of

rings, as per IS specification no. 4985/1988 including all local and central

taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing meterial etc. complete.

110 mm dia 6 KG PVC Pipes

New TW to Nadapa HGLR

1000.00 Rmt 200 mm dia 6 kg PVC pipes 665.00 Rmt

Nadapa WTP to NADAPA HGLR

600.00 Rmt 90 mm dia PVC pipe for Bypass the vadavara line 139.00 Rmt

2% LS Item No.2 29,057.20 LS

Providing & Supplying P.V.C. Fittings suitable for P.V.C. Pipes at store or

at site of work incl. freight, loading, unloading, stacking, insurance and

all taxes etc. complete

Excavation for pipe line trenches for water supply, sewerage line,

manhole etc. all with shoring and struting if required as per required

gradient and line including safety provisions using site rails and stacking

excavated stuff including up to all required lead cleaning the site etc.

complete for all lifts and strata as specified. Upto 1.50 Mt depth from

1470.69 Cum 3.1) in Soil 89.00 Cum

817.05 Cum 3.2) in Hard Murrum 135.00 Cum

653.64 Cum 3.3) in Soft Rock 163.00 Cum

326.82 Cum 3.4) in Hard rock 372.00 Cum

3540.00 Rmt Item No.4 19.00 Rmt

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and specials

of following class and diameter including cost of conveyance from stores

to site of works including cost of labour, material, cement solvent, giving

satisfactory hydraulic testing as per ISI code.

110 mm dia 6Kg PVC Pipeline

1000.00 Rmt 200 mm dia 6 kg PVC pipes 37.00 Rmt

600.00 Rmt for 90 mm dia PVC pipeline 17.00 Rmt

5.40 Cum Item No.5 3,368.55 Cum

Providing CC M:10 for encasing pipes using trap metal size 12 mm to

mm including form work curing consolidation etc complete for various

location on pipeline

… By using trap metal 40 mm size

3194.00 Cum Item No.6 22.00 Cum

Refilling the pipeline trenches incl. ramming, watering, consolidating

desposal of surplus stuff as directed within a radius of 3 km.

2.00 No Item No.7 3,563.00 No

Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846

(Latest Edition) of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading,conveyance to departmental stores, stacking etc.

100 mm dia sluice valve PN 1.0 with ISI mark

1.00 No 200 mm dia sluice valve PN 1.0 with isi mark 9,813.00 No

1.00 No Item No.8 5,348.00 No

Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312

(Latest Edition) of following class and diameter including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

Reflux valves - 100 PN 1.0 IS 5312 with ISI mark

9.00 No Item No.9 5,499.00 No

Providing and supplying C. I. Temper proof Air valves with SS 304 Float

gun metal- nozzle of approved make & quality of following class and

diameter including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete.

50 mm dia Without Isolating Sluice Valve PN

2.00 No Item No.10 439.00 No

Lowering, laying and jointing in position following C. I. / D/F Reflux

valves, Butterfly valves, Sluice valves and Air valves including cost of all

labour, jointing material, including nut bolts and giving satisfactory

hydraulic testing, etc. complete.

10.1) 100 mm dia Sluice Valve

9.00 No 10.2) 50 mm dia Air valve 178.00 No

1.00 No 10.3) 100 mm dia Reflux valve 439.00 No

3.00 No Item No.11 5,279.00 No

Construction of valves chambers in brick or bela stone masonry, locally

available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of

trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3

and cement pointing outside in C. M. 1:3 and top cover of precast RCC

slab 100 mm thick (with key hole in two parts, each with handles or MS

Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe

invert level incl. complete civil works but excl. cost of excavation and

refilling, wiht bela in two parts with 23 mm thick brick masonry wall in

Size of Chamber 0.60 x 0.60 x 1.0 Mtr Deep

9.00 No Item No.12 3,112.00 No

Erection of airvalve riser by installing new MS pipe of 6 mm thick and

3.2 mt length with necessary fittings such as flange of appropriate size,

nut bolts and embeded the pipe in RCC M:15 with offset of 10 cm

around pipe with necessary steel etc complete

Dia of Airvalve 50 mm & MS pipes

Item No. 13 Suply and

installation of MS Fabricated structure cabin a site of work using 65 mm.

50 mm & 125 square pipes with cabin size of 1.5 m X 1.5 m X 2.13 mtr

(combined size 3mX3m) including providing and fitting of (1) Backalite

sheet 3.5 mm thick in sides. (2) 20 guage MS sheet outer side for side

walls (4) 24 gauge Gl Sheet outside with 15 mm plywood sandwich

fitting & flooring with 19 mm water proof plywood sheet (50 Shock

proof rubber mating. Joh includes oil painting two coats, door locking

handle arrangements. providing proper air ventilation and fuse box. The

meter & fuse box should be litted on timber hold fast for holding screw

or nut bolts by semi skilled labour as per detailed technical

specifications, drawing and instructions of EIC.( including RCC

foundation work.)(At Modsar and Nadapa)

Item No. 14 Excavation

for foundation upto 1.5 m depth including sorting out and stacking

of useful materials and disposing off the excavated stuff upto

6.13 Cum (A) Loose or soft soil 50% 121.72 1.22 122.94 Cum

6.13 Cum (a) In Dense or hard Soil 50% 155.77 1.56 157.33 Cum

Item No. 15 Providing

and laying cement concrete in C.C 1:3:6 in including ramming, curing

etc. complete, with using granite auitzit trap matail size 40mm 50 mm

1.84 Cum for foundation 3662.00 0.00 3662.00 Cum

Item No. 16 Uncoursed

black or white stone masonry for foundation and plinth in C.M 1:6,

including dressed stone corners and without dressed stone top course.

Item No. 17 Providing

and laying cement concrete in C.C 1:4:8 in including ramming, curing

etc. complete, with using granite auitzit trap matail o size 40mm 50 mm

3.13 Cum for Bedding CC 3393.00 0.00 3393.00 Cum

Item No. 18 Providing

15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and

finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand)

Item No. 19 Designing,

providing, fabricating pressure filter / package WTP transporting to site,

installing, testing and commissioning at site including supply and

erection of pressure pump set with all electrical work etc. complete one

month trial run with guarantee for one year.

capacity 2.0 MLD

Item No. 20 Providing,

Supplying & installing Vacuum Control Direct wall mounted gas

chlorinator including necessary fittings, installation and commissioning

of plant incl. Clamp, copper pipe, ferule filter & control valve with

injector.1 Kg.Capacity Kandherai SHW

Item No. 21 Providing

supplying Chlorine Gas cylinder empty of required capacity with

necessary explosive certificates incl. all taxes.Chlorine cylinder 100 Kg.

2.00 No. Kandherai SHW 26945.00 0.00 26945.00 No.

Item No. 22 Supplying

and Erection approved make self priming domestic monoblock

waterpump with 1 Hp motor suitable for operation on 230 volt 50c/s.AC

supply with metalic flange and MS impeller delivery of following

discharges. (B) 100 LPM 14 mt head suitable for 25 mm dia delivery , Cat-

1.00 Set. II Kandherai SHW 9870.00 98.70 9968.70 Set.

Item No. 23 Providing

laying and Jointing in true line and level 25 mm dia UPVC PIIPE(SCH 40)

for cold water including fittings make PRINCE /SUPREME /ASTRAL

/FINOLEX or equivalents as approved by EIC,Pipe shall be concelled as

directed including necessary fittings etc.including testing of pipe and

joints and fixing the same with adhesive solvant, including cost of all

materials. Kandherai SHW

Mechanical Part

QTY. Unit DESCRIPTION OF ITEM SUPPLY

RATE Labour Rate PER AMOUNT

Item No:- 1 HMSP for NADAPA WTP DHANETI VILLAGE

Monoset sub. pump 3 phase 400/440 vott, 50 c/s. A.C.

Supply & 2900 RPM , following IS 14220 MOC :

Casing: CI-FG260, Impeller : Bronze & Shaft : SS:410

Item No:-2 lowering of HMSP

Lowering of openwell Horizontal Submersible pump

sets/bore well pump sets in Well/Sump with HDPE

pipe/GI/MS column pipe by means of chain pulley

block/fixture & jointing the cable with fuse unit /

Control panel board including fitting accessories &

making it in working condition including satisfactory

testing.(for dam site pontoon)

4.00 Job above 7.5 HP to 20 HP 943.00 0.00 943.00 Job

Item No:-3 P.P. rope

Providing & supplying 3 strand hauserlaid & 8 strand

plaited construction Polypropylene rope of size 28 mm

50.00 RMT as per IS:5175/2014 OR LATEST of standard & reputed 54.39 0.00 54.39 RMT

brand for lowering submersible pump set with HDPE

pipe in tube wells drilled.

Item No:-4 Cable

PVC insulated flat submersible cable as per detailed

technical specifications of R\C of GWSSB conforming

to IS 694, IEC 60227 /

Item No:-5 CC panel

DOL / Star Delta starter suitable for local & remote

pump control application consisting of MPCB, overload

relay and contactors as per Type II coordination

including digital voltmeter, analogue ammeter with

selector switch, run hour meter, required protective

relays & control accessories.

Item No:-6 Changeover switch

Supply of Approved make Iron Clad or metal clad four

2.00 Nos. pole change over switch 415V confirming to IS of 10382 0.00 10382.00 Nos.

following capacity.(200A Cat-ii)

Item No:-7 Reflux Valve

Providing and supplying ISI mark CI D/F Reflux Valves

as per IS:5312 (Latest Edition) of following class and

diameter including all taxes, insurance, transportation,

freight charges, octrol, inspection charges, loading,

unloading. conveyance to departmental stores, stacking

etc. complete. including Lowering, laying and jointing in

position following C. I. / D/F Reflux valves including

cost of all labour, jointing material, including nut bolts

and giving satisfactory hydraulic testing, etc. complete.

Item No:- 8 PRESSURE GAUGE:

Design, Supply, Installation, Testing, Commissioning

(SITC) of Bourdon Type Pressure Gauge, ±1% accuracy,

Direct bottom 1/2" NPT (M) process connection, IP

Glycerine filled, SS304 Case with Bayonet Type Bezel,

SS316 L Bourdon Tube, SS316 Movement material,

Aluminium dial with black graduation on white

background, Micro Zero adjustable pointer, neoprene

gasket, Blow out disc, shatter proof glass, SS tag plate

etc as per IS 3624.( Pump delivery & header).As per

detail specification.

Range : 0 - 20 kg / sq.cm. - (150 mm Dial Size)

Item No:- 9 Sluice Valve

Sluice Valves PN-1.6 with handwheel/Cap operated (PD type

Providing and supplying ISI mark CI D/F Sluice Valves

as per IS:14846 (Latest Edition) of following class and

diameter including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

unloading. conveyance to departmental stores, stacking

etc. complete. including Lowering, laying and jointing in

position following C. I. / D/F Sluice valves and Air

valves including cost of all labour, jointing material,

including nut bolts and giving satisfactory hydraulic

testing, etc. complete.

Item No-10 M.S. specials for common header and other

MS Specials for Flang, Nipple, bents, T-Joints, Nut

1200.00 kg bolts, Reducer, MS channels etc as per site requirements 96.00 9.60 105.60 kg

( considering 600kg per section for common header)

Item No-11. MCCB

providing and erecting approved make four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. At 415V, having normal current rating

1.00 Ea. up to 25A to 100A. With fixed thermal & magnetic 4649.00 128.00 4777.00 Ea.

release suitable to work on A.C. supply 50c/s. with all

internal connections, spreader tinned copper & coplete

etected in existing 16 G.M.S. housing

sheets steel powder coated enclosure suitable for incorporating

1.00 Ea. one/two nos. MCB.

Item No:-12 Rubber Matting

Sq. Supplying rubber matting of following thickness as per Sq.

Mtr IS:15652/iec 61111 (12mm thickness) Mtr

Item No.:- 13 Full Bore Electromagnetic Flow Meter (Regular

Power Operated)- PN

Microprocessor based, Modular design, 2 line LCD for indication

of actual flow rate, forward, reverse, sum totaliser display, ±0.5%

accuracy at 0.3 to 4 m/sec velocity, 4 to 20 mA with

HART/Modbus output, one scalable pulse, one status output, IP

protection, Die cast aluminium/ polycarbonate/ SS316 with

Anticorrosive Paint/ PU finish with glass window enclosure,

Inbuilt EEPROM and Data Logger, 20 meters cable length for

sensor to transmitter communication etc alongwith wall mounted/

stand mounted cabinet.

1.00 No 100mm Nominal Bore 62244 3593 65837.00 No

1.00 No 200mm Nominal Bore 101426 4623 106049.00 No

Mechanical part

Total Estimated Amount in Rs.

Contractor's Signature Deputy Executive Engineer,

P.H.S.Sub-Dn.(G.W.S.& S.B.)