SPECIAL REPAIRS TO CERTAIN OMQs AT AF STN NALIYA

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specificallly provided complete all as specified and directed.

M&L for providing cement concrete (1:5:10), type E-2, using 40mm graded stone aggregate as in sunken portion of WC/toilet/bath complete all as specified and directed.

M&L for rendering 10mm thick, in cement mortar (1:3) on concrete/brick work of sunken portion, mixed with Dr Fixit pidiproof LW+ or equivalent @ 200ml/50Kg of cement complete all as specified and directed.

M&L for applying two coats of flexible polymer acrylic water proofing coating, 1mm thick (Dry film in two coats) using Dr Fixit pidifin 2K of M/S Pidilite Industries or equivalent including necessary pond testing in sunken portion complete all as specified and directed.

M&L for providing & injecting chemical emulsion for post constructional anti-termite treatment along the external wall below concrete or masonry apron with chemical emulsion @ 2.25 ltr/per linear meter including drilling and plugging holes etc complete all as specified and directed.

M&L for anti-termite treatment of soil under existing floors and junctions of wall & floor, using chemical emulsion @ one ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 including white cementing and surface finishes to match the existing floors / walls complete all as specified and directed.

M&L for post construction ATT of voids in masonry using chemical emulsion one ltr per hole at 300mm internals including drilling holes at 45 degree and replugging them with cement mortar 1:2 including white cementing and surface finishes to match the existing floors / walls complete all as specified and directed.

M&L for post construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 ltr per hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same with white cement including surface finishes to match the existing surface complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

Demolition cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), incl chequred tiles complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base finished even and fair complete all as specified and directed.

S&F Non skid ceramic coloured tiles mm, 7 to 8mm thick,(square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc,laid over and including 15 thick screed bed in cement mortar 1:6 and set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

S&F glazed ceramic Coloured tiles over vertical surface of wall,350x 250x 7mm/ 450x350x7mm thick (or nearest size), set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in CM(1:4) complete all as specified and directed.

M&L vitrified ceramic coloured tiles, light shade, 10mm thick (square/rectangular), polished, area of each tile not exceeding 0.36 sqm , in floors etc set and jointed in net slurry and pointed in white or coloured cement to match with existing shade over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L vitrified ceramic coloured tiles, light shade, 10mm thick (square/rectangular), polished, area of each tile not exceeding 0.36 sqm , in floors etc set and jointed in net slurry and pointed in white or coloured cement to match with existing shade over and including backing coat of 10mm thick in CM(1:4) complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

S&F in repairs Kitchen basket, stainless steel, set of 6 Nos, basket, made out of not less than 3mm dia stain steell rod of grade 304 along with 01 set of telescopic channel (heavy duty) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete, each set shall comprising of of following baskets:- (a) Cup& saucer basket - 430x508x100mm --1 No (B) Cultery basket - 430x508x100mm --1 No (c) Partition basket - 430x508x150mm --1 No (d) Plain Basket - 430x508x150mm --1 No (e) Plain basket - 430x508x250mm --1 No Dish (plate) Basket - 430x508x250mm --1 No Make: " Eagle" Shresh interor product Rajkot (Gujarat)/ " Chroma " Chroma design/"Silver Bell" ARIHENT KICHEN,GIDC Phase -iii, Near Nana Chiloda, Naroda, Ahmendabad. Note: Heavy duty channel shall be of same manufacturer of basket , then it shall be as per recommendation of manufacturer of basket

S&F in repairs telescopic channel (heavy duty) of size 300mmxx450mm long and roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete for each basket of kitchen cabinate complete all as specified and directed.

S&F 18mm thick prelaminated PVC Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC ply works all as directed. (Make Rajashri or equivalent)

Description all as per srl item No 19.00 here-in before but 18mm thick plain PVC celuka plywood.

Description all as per srl item No 19.00 here-in before but 12mm thick plain PVC celuka plywood.

Description all as per srl item No 19.00 here-in before but 05mm thick plain PVC celuka plywood.

S&F brass handle fabricated type polished of size 100mm complete all as specified and directed.

S&F Stainless steel butt hinges medium weight of size 75mm complete all as specified and directed.

S&F Ball catcher with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed.

M&L 20mm thick Granite (of any type) pre-polished in cooking platforms, steps, jambs, pillars, window cills and like fixed with neat cement slury over 15mm thck cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for machine cut kota stone slab in patch work 20-25 mm thick over cement screed base 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match with the shade of slab including grinding polishing complete all as specified single piece of stone on steps shall be provided complete all as specified and directed.

M&L in repairs for factory made machine pressed precast concrete, rubber moulded, interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade fixed with grey cement and pigment over 25mm thick sand cushioning complete all as specified and directed.

M/L for 100mm thick PCC (1:2:4), type B-2 using 40mm graded stone aggregate, finished even and smooth without using extra cement as in floor finishing and hardstanding/ PCC path incl necessary form work etc. complete all as specified and directed.

Rounding to edges of stone slabs one edge,such as in steps,cooking plateform,and other similar situations complete all as specified and directed.

Extra over item No. 30 above, for providing two Nos grooves over stair case treads all as directed.(Note: Two nos grooves shall be measured as one length for payment) complete all as specified and directed.

S&F in repairs 25 mm dia stainless steel drapery curtain rod, complete all as specified and directed.

S&F in repairs Fancy type stainless steel curtain road bracket suitable for 25mm dia curtain rods fixed with chromium plated screws complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed

M&L for rendering 5mm thick cement plaster in cement mortar (1:3) on fair faces of concrete as in soffit, ceiling of slab/ chajjas, finished even & smooth without using extra cement complete all as specified and directed

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces of wall and finishing the surfaces with neeru finish complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in one layers, in cement mortar (1:4) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement, using water proofing compound @ 3% by weight of cement in finishing coat or as per manufacturer's instructions complete all as specified and directed. (Note:- water proofing compound will be measured and paid for separetaly as supply only)

Supply only integral water proofing compound.

M&L for opening out cracks in wall surfaces in 'V' shape by mechanical grinder and removing the loose material. filling with crack filler of Dr. Fixit crack-X, shrinkfree or equivalentall as per manufacturer's instructions and finishing the surfaces to match with existing finish complete all as specified and as directed.

M&L 3mm thick wall care putty on wall complete all as specified and directed.

M&L 3mm thick wall care putty on ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed

M&L for preparation of new plastered surfaces of ceilings and applying three coat of white wash on ceilings complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of weather proof acrylic paint plain or camouflage pattern over a coat of weather coat primer complete all as specified and directed

M&L complete removal of existing treatment on wall and applying two coats of weather proof acrylic paint plain or camouflage pattern over a coat of weather coat primer including preparation of surfaces complete all as specified and directed

M&L for applying rough cast plaster on newly plastered surfaces of wal lcomplete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bond distemper over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed

M&L for complete removal of existing treatment and applying two coats of oil bond distemper over a coat of with alkali resistant priming paint complete all as specified and directed

M&L for preparation of old wooden surfaces of any description over 10cm width of girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 15 mm bore of pipe including taking down complete all as specified and as directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 20 mm bore of pipe including taking down complete all as specified and as directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm sqr with all fittings and fixed to walls and ceilings or laid in floors for 25 mm bore of pipe including taking down complete all as specified and as directed.

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain walls/ceiling or laying in floors including taking down complete all as specified and directed.

S&F bib taps fancy type chromium plated, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F in repairs 15mm bore CP stop cock regular body(male Thread) complete all as specified and directed.

S&F conceal stop valve fancy type cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed.

S&F in repair, Quarter turn , mat chromium plated, single lever , Wall mixer with telephone shower (Make-Jaguar/ Prayag or equivalent as approved by GE)

S&F in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note:- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

S&F in repair, stainless steel sink with drainage board made out of, 1.0mm thick for kitchen or laboratory with plugs, washers and wastes bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 915 x 460 mm with bowl size 410 x 330 x 160mm complete all as specified and directed.

Supply only, Quarter turn, mat chromium plated finish Pillar cock complete all as specified and directed. (Make-Jaguar/ Prayag or equivalent as approved by GE)

Supply only pillar taps cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.

S&F in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.

S&F in repair, Jet spray (Butterfly) with 1Mtr tube Cat No-BEA-17 complete all as specified and directed. (Make-Prayag or equivalent as approved by GE)

S&F in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F in repairs vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to flushing pipe, ''P'' trap set in and including concrete and making good to floor complete all as specified and directed.

Supply only plastic water closet seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.

S&F in repair PTMT grating doom over Nahani trap and floor trap of 100mm Dia complete all as specified and directed.

S&F health faucet (body cleaner) with 1.0m tube and hook (PVC tube), white/Ivory Cat No- BEA-84 (Make-Prayag or equivalent as approved by GE) complete all as specified and directed.

S&F corner glass shelf 300mm Cat No- BEA-44 (Make-Prayag or equivalent as approved by GE) complete all as specified and directed.

S&F glass shelf 300mm (with ABS Brackets) Cat No- BEA-49 (Make-Prayag or equivalent as approved by GE) complete all as specified and directed.

S&F Peg set 6 Cat No- BEA-30 (Make-Prayag or equivalent as approved by GE) complete all as specified and directed.

S&F CP brass towel Rack Cat No- BA-52 (Make-Prayag or equivalent as approved by GE) complete all as specified and directed.

S&F CP brass soap Dish Cat No- BA-15 (Make-Prayag or equivalent as approved by GE) complete all as specified and directed.

S&F CP brass towel Ring Cat No- BA-21 (Make-Prayag or equivalent as approved by GE) complete all as specified and directed.

S&F in repair, plate rack of overall size 24" x 24" x 10 inch made out of 0.63mm thick stainless steel sheet complete all as specified and directed. (Make-Prayag or Equivalent)

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) pipe (Type 'B') single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F PVC (SWR) bend any radius for 110 mm bore pipe incl jointing material complete all as specified and directed.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal for 110mm dia bore incl jointing material complete all as specified and directed.

S & F PVC (SWR) branch piece, double (double Y) equal or unequal for 110mm dia bore incl jointing material complete all as specified and directed.

S & F PVC (SWR) junction single, (Single T) equal or unequal for 110mm dia bore complete all as specified and directed.

S&F PVC 75mm dia (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F PVC (SWR) bend any radius for 75 mm bore pipe incl jointing material complete all as specified and directed.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal for 75mm dia bore incl jointing material complete all as specified and directed.

S & F PVC (SWR) branch piece, double (double Y) equal or unequal for 75mm dia bore incl jointing material complete all as specified and directed.

S & F PVC (SWR) junction single, (Single T) equal or unequal for 75mm dia bore complete all as specified and directed.

M&L for 63 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F PVC (SWR) vent cowl equal or unequal for 110mm dia bore complete all as specified and directed.

Dismantling of water tanks exc 250 and n. exc. 500 ltr complete all as specified and directed.

S&F 500ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted complete all as specified and directed.

Taking down of chowkats or frames not exc 1.5sqm with shutters (with out taking off shutters from the frames) complete all as specified and directed.

Taking down of chowkats or frames exc 1.5sqm but n exc 4 sqm with shutters (with out taking off shutters from the frames) complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm PLAIN COLOURED PVC sheet reinforced with MS square tube, to match complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain coloured PVC sheets and 5mm thick x 15mm wide PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of PLAIN COLOURED PVC sheet joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed.

S & F Iind class HW solid, straight chowkats and frames, rought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M & L preparing surfaces of wood and wood based materials, and treating back of chowkats with tar or coal tar black paint complete all as specified and directed.

S & F mild steel hold fast and similar small articles conforming to Fe 290-0 or E 165 complete all as specified and directed.

M&L for cement concrete type C1 1:3:6 (20mm graded aggregate) for hold fasts complete all as specified.

S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35mm thick 2nd class HW glazed and Skelton shutter open rebated and prepared to receive glass, gauzed etc edges of framing plain chamfered fitted wtih cut and mitred beads for securing wire mesh complete all as specified and directed.

S&F 12mm thick prelaminated particle board prelaminated both sides with decorative choice lamination and fixing in same position from aluminium partition very carefully including replacement of defective aluminium beading cleat if required complete all as specified and directed.

S&F stainless steel butt hinges,medium weight,size 100 mm with ISI mark complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 250mm aluminium anodised sliding door boolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repairs MS 300mm long ordinary rat tail rod pattern springs including roller and roller plate to the wooden frames or MS frame including welding etc as required complete all as specified and directed.

S & F aluminium anodised wire cloth 0.45 nominal dia of wire and average width of aperature 1.40 and fixed with stainless steel wire staple complete all as specified and directed.

S&F in repair aluminium alloy wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium wire staples complete all as specified and directed.

S&F 140mm floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fised in floor complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or metal frame, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality fixing with oil putty/wooden beads in GF/FF, area of glass pane n.exc 0.50 Sqm including replacing damaged beadings complete all as specified and directed.

Descriptoin all as per Srl item No.118.00 here-in-before but 3mm thick figured glass pin head type complete all as specified and directed.

Dimantling structural steel work including doors, gates but excluding frames trusss complete all as specified and directed.

S&F stainless steel confirming to 302 grade work such as grills, railings complete all as specified and directed.

Complete removal of existing water proofing treatment from top of roof and canopies/ chajjas of buildings including removing the debris as out side MD land complete all as specified and directed.

M&L for roughening surfaces of old concrete roof/ floor by picking sweeping clean and washing down with water to removing dust etc. complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per sq meter complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in cement mortar (1:3) on roof slab/ canopies/chajjas with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions and make surfaces to receive water proofing treatment complete all as specified and directed. (Note:- water proofing compound will be measured and paid for separetaly as supply only)

M&L for preparation of concrete surfaces and applying APP modified water proofing membrane (gravel finish) with non woven polyster reinforcement , not less than 3mm thick having weight not less than 3.5 kg/sqm over a coat of bituminous filler/ primer @ 250 gm/sqm conforming to IS 3384-1986 through approved applicator and applying bitumenious aluminium paint @ 100gm/sqm on top of APP membrane all as per manufacturer's instructions complete all as specified and directed.

S&F powder coated aluminium, three track sliding window frame of size 91.08x31.75x1.2mm comprising of one No of fly proof shutter and two Nos of glazed shutter frames of size 40x18x1.2mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint (iv) aluminium (anodised) grill DG 101 made out of 7x4.50mm thick flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm(Make of Aluminium Sections powder coated : Jindal/ INDAL/Hidalco)

S&F powder coated aluminium ventilator shutters with frame (aluminium section weighing 0.55Kg/m), fixed with out sash bars, openable type (Top hung) and glazing complete with 5.5mm thick coloured/tinted sheet glass with necessary clips, hinges, aluminium (anodised) peg stay 30 cm long-01 No. with aluminium (anodised) grill DG 101 made out of 7x4.50mm thick flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm all as specified and as directed (Make of Aluminium Sections: Jindal, INDAL & Hidalco)

Taking down copper/aluminum wiring (light, fan, socket or power) complete and including (fitting and fixture such as switches, socket ,ceiling rose ,pendent ,regulators , etc to be measured separetaly) NOTE:- Job including for taking out old gutties,screw,nails etc and making good to disturbed surface of wall ,floor etc including to match with the existing surface.

M&L for precast cement concrete block masonry (1:3:6) type C-1 concrete with solid blocks, exceeding 10cm in width, set in cement mortar 1:6 complete all as specified & directed.

M&L for 20mm thcik Granite (of any type) work table rubbed and polished for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L for moorum filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified & directed.

M&L for PCC (1:4:8) type D-2 (by ussing 40mm graded crushed broken stone aggregate) as in foundation filling & mass concreted complete all as specified & as directed.

M&L for for hardcore, broken to gauge not exceeding 63mm spread, levelled and rammed including watering if required complete all as specified & as directed.

M & L for point wiring with 1.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC conduit concealed in the wall with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl fabricated steel terminal box made out of 1.6 mm thick MS sheat concealed in the wall with 3 mm thick laminated sheet top cover for mounting the switches , socket outlets , fan regulators etc all as specified and directed for following. (Note- Size of PVC conduit not less than 20 mm.) (a) One light/Fan point controlled by one switch.

(b) One Switch socket 3 pin outlet 5 amp on independent board.

(c) One light point controlled by two 2-way switches, with cable 1.5 sq mm size

(d) One 3 pin socket outlet 5 amp on the same board with other switches.

(e) One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size.

Description all as per srl item No 135.10 here-in-before but with 2.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor and including provision of 2.5 sq mm PVC insulated ,multistranded copper conductor as earth continuity conductor connected to commen earth, for 15 amp ind board

S & F switch piano flush type single pole one way 5 amp complete all as speicfied & as directed.

S & F switch piano flush type single pole two way 5 amp complete all as speicfied & as directed.

S & F ceiling rose three Phase/PVC polycarbonate, isolated body complete all as speicfied & as directed.

S&F switch socket combination 2 in 1, 3 pin 5/15 amp flush type complete all as speicfied & as directed.

S&F switch socket combination 2 in 1,5 amp flush type complete all as speicfied & as directed.

S&F socket outlet 2 in 1, 3/5 pin 5 amp multi purpose, flush type complete all as speicfied & as directed.

S&F vertical type DB , provision for FP MCCB 32 amp,25 KA (v-tech) N3 frame up to 200 amp 4 ways,IP 43 protection , shrouded neutral bar & pan assembly with flexible connecting link in the wall with suitable nut and bolt including matching the existing surface acomplete all as speicfied & as directed. Make-Indoasian, cat no-NVMCCF04 or equivalent model & make of havells, CG, Bajaj, Legrand or approved by GE.

S&F MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as speicfied & as directed.

S&F MCB DB SPN 4 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface complete all as speicfied & as directed.

S&F in replacement of MCB single pole and neutral 6-32 amps, 240 Volts, Complete all as specified and directed.

S&F in replacement of MCB 6 to 32 amps single pole 240 Volts, Complete all as specified and directed.

S&F switch bell push, flush type 5 Amp complete all as speicfied & as directed.

S&F bell, AC, 230 Volts single pole complete all as speicfied & as directed.

Supply and fix LED street light 25 W, pressure die cast complete all as speicfied & as directed.

Supply & fix LED tube light along with fixture,18W, including taking down old Unsv fittings any type complete all as speicfied & as directed.

M&L for replacement of lamp holder, insulated body with back plate batten/angle type for batten fitting complete all as specified & directed.

S&F LED Bulb 7 Watt 240 V capacity complete all as speicfied & as directed.

S&F in replacement of fan regulator flush type on the existing phenolic laminated sheet etc as per reqd complete all as speicfied & as directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver. Note :- Old Exhaust Fan will be diposited in MES store Yard.

Supply & fix fans ceiling complete with all accessories 230 V,1200 mm sweep. BEE 5 star rated,Taking down ceiling fan from the ceiling /roofs by disconnecting of electrical connection. (Note :- Old ceiling fan will be deposited in MES Store Yard)

M&L for sheet metal enclosures with socket and plug top and MCB single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amp 230 volts. including taking down old Unsv Sheet metal enclosure any type complete all as speicfied & as directed.

Taking down electric meter of any type and any make single/three phase by dismantling of all electrical connection checked the meter ,and refixed same Nos of meter in existing transparent enclosure with suitable size of screw, in same Nos of qtr after repair works complete all as speicfied & as directed.

S&F in replacement sub main wiring drawing through PVC conduit concealed in the wall with all accessories with two single core 6 sq mm and one run of 6 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade including taking down old Unserviceable sub main wiring of any size with any type of conduite/cassing capping complete all as speicfied & as directed.

S&F in replacement sub main wiring drawing through PVC conduit concealed in the wall with all accessories with two single core 4sq mm and one run of 4 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade including taking down old Unserviceable sub main wiring of any size with any type of conduite/cassing capping complete all as speicfied & as directed.

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated with suitable nut bolt,Fastner, PVC Hot/Cold pipe.including taking down old unserviceable geyser of any capacity by disconnecting of all electrical connection,nut and bolt with all accessories. NOTE :- Old water Heater will diposit in the MES store yard.

M&L for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition.

Supply and lay pipe galvanized, “Medium class”, including fittings 50 mm dia.including taking down old rusted pipe any type from the trench/roofs/wall etc by neccesary excavation and returning and filling complete all as speicfied & as directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia.including taking down old rusted pipe any type from the trench/roofs/wall etc by neccesary excavation and returning and filling complete all as speicfied & as directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm dia.including taking down old rusted pipe any type from the trench/roofs/wall etc by neccesary excavation and returning and filling complete all as speicfied & as directed.

Supply and fix Valve, stop, screwed, 25 mm dia pipe,including taking down old rusted stop cock/any type of valve etc complete all as speicfied & as directed.

Supply and fix Gate Valve, screwed, 50 mm dia pipe, including taking down old rusted stop cock/any type of valve etc complete all as speicfied & as directed.

Supply and fix Cock, bib, brass, screwed down for size 20 mm dia pipe,including taking down old rusted bib taps any type of valve etc complete all as speicfied & as directed.

SHREE CHAMUNDA CONSTRUCTION WORK

KALIKAY ENTERPRISES

Krishna Engineering