Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹47.5 L
EMD Value
₹94,929
Closing Date
11 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM HWBF VADODARA
GM HWBF VADODARA
Miscellaneous Civil and Structural steel maintenance work at HWBF, Vadodara for the year 2024 25.
2024_HWB_813075_1
HWBFV/ CIVIL/2024/04
Open Tender
Civil Works
Item Rate
365 days
HWBF VADODARA
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹0
₹94,929
HWBF VADODARA
6 Aug 2024
27 Jun 2024
17 Jul 2024
27 Jun 2024
11 Jul 2024
27 Jun 2024
27 Jun 2024 - 10 Jul 2024
10 Jul 2024
Amount
Demolishing of RCC, PCC by mechanical/hand means and stock piling at designated locations, chipping, etc. and disposing off all the debris outside the plant premises, stacking, serviceable and unserviceable material so separately including cutting, reinforcement, etc. complete as directed.
Demolishing brickwork masonary by mechanical means including stacking of serviceable material disposing of all debris outside the plant premises at the risk and cost of the contractor and as directed by the Engineer.
Removal of doors, and windows (steel /Aluminum or wooden) Area below 3 sq.m. and stacking the material and as directed.
Demolishing tile work in floor, laid in cement mortar and stacking the material within 50 M lead. For tiles thickness 10 to 25mm.
Dismentaling of old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish outside the colony premises.
Earth work in excavation in all types of soils for foundation, trenches or drains not exceeding 1.5 M in depth and getting out the excavated soil and disposal of surplus excavated earth outside the plant premises at risk and cost of the Contractor, etc. complete and as directed by the Engineer.
Supplying and filling in plinth coarse goma sand under floors including watering, ramming,consolidating and dressing etc. complete and as directed.
Providing and laying plain cement concrete (1:2:4) (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) of approved quality in foundation, plinth, payements, (plinth beams and under floor)including ramming, leveling, curing, form work wherever necessary etc. all complete as per drawings, specifications and as directed by the Engineer.
Providing and fixing, centering and shuttering including strutting propping, etc. for RCC works including removal of form work after concreting for foundation footing base of Column, PCC, Plinth, beams, coping, slab, etc. complete as directed by the Engineer.
Providing,laying & fixing in position TMT bars of grade Fe 500 D (IS 1786) or more for reinforcement at all levels, for RCC in situ work including cost of straightening, cutting, bending & binding with 16 gauge MS annealed binding wire, cement mortar spacer blocks, etc. all complete as per drawings, specifications and as directed by the Engineer.
Providing and laying reinforced cement concrete M-20 using approved size of graded stone aggregate and proportion 1:1.5:3 (1 part cement : 1.5 sand : 3 aggregate 20mm down gauge graded stone aggregate of approved quality including consolidating, leveling, finishing, curing, etc. all complete at all levels upto 15 meter height as per drawings, specifications and as directed by the Engineer but excluding cost of reinforcement bars including compaction and curing, etc. complete and laying at reinforcement for reinforced concrete work in foundations, footings, bases of columns, walls, suspended floors, roofs laying shelves and their supports balconies, lintels, beams, girders, cantilever columns as per drawings, specifications and as directed by the Engineer. ( Excluding cost of centering and shuttering. )
Providing and laying brick masonry using burnt clay bricks of class designation 7.5 for walls/pillars/steps/trenches, etc. at all levels & in foundation and plinth with cement mortar 1:6 including cost of raking of joints, curing, including providing RCC band at indicated levels (RCC band will be paid separately), etc. all complete at all levels as per drawings, specifications and as directed by the Engineer.
Half brick masonry in partition walls with common burnt clay bricks in super structure above plinth level up to floor-V level in cement mortar 1:4 at all floors and levels scaffolding, raking out joints, curing, etc. complete all as per specifications & as directed by the Engineer-in-Charge.
Providing and laying 15mm thick plaster in cement mortar 1:4 (1 cement : 4 fine sand) finished with a floating coat of neat cement inside surface proportion over brick masonry walls upto 15 mtr. height and concrete surfaces including raking of joints, hacking of concrete surfaces, curing, scaffolding, providing grooves etc. all complete as per drawings,specifications and as directed by the Engineer.
Removing old plaster or any accessories for facia of facious and Providing and fixing 18mm thick (Area of slab up to 0.50 Sqm.) gang sand cut mirror polished machine cut granite of any colour and shade for vanity counters, door sills, facias and similar locations of required size of approved shade, colour and textures laid over a 20 mm thick base cement martar 1:4 or with epoxy resin based adhensive including cleaning and joints treated with white cement mixed with matching pigment, exoxy touch ups rubbing curing, edge moulding and polishing to edge to give high glass finish etc. complete and as directed by the Engineer.
Providing and laying vitriifed floor / dado tiles in size of tile 500 X 500 approx. (Thickness to be specified by the manufacturer ) water absorption less than 0.08 % and confirming to IS: 15622 of approved make,in all colours and shades, laid on 20 mm thick cement mortor 1:4 ( 1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 Kg./Sqm. including skirting grouting the joints with white cement and matching pigments etc. complete and as directed by the Engineer.
Providng and applying white cement based putty of average thickness 1 mm, JK or equivalent of approved brand and manufacturer,over the plastered wall surface to prepare the surface even and smooth etc. complete as per directed by E.I.C.
Providing and applying one or more coats of white wash to existing/new surfaces of walls of plant building as and when required by removing dust, loose scales by scrapping and adding blue and glue in lime including scaffolding etc. complete and as directed by the Engineer.
Providing and applying one or more coats of 1st quality synthetic enamel paint on old/new surfaces of approved brand and shade over walls, doors, windows, ceilings, gumlas, speed breakers, kerb stones, cupboards, file racks etc. as and when required upto height of 15M, including scaffolding, removing loose scales, cleaning dust applying primer on patches etc. complete and as directed by the Engineer.
Providing and applying two or more coats of premium acrylic emulsion of approved brand and manufacturer and of required shade having high washability and longer duration on walls, columns, ceiling, etc. (on new or old work) to give an even shade including removing loose scales, fungus, water marks, etc. filling of nail holes and depression with putty of J.K. or equivalent make wall putty repairs and preparing surfaces upto the height of 15 mtrs. including scaffolding, cleaning the splashes on doors, floors, etc. complete as per specifications and as directed by the Engineer.
Providing and applying one or more coat of water/oil or any suitable primer Cement base primer/Oil base primer on old surfaces for making suitable for applying next finishing coat of any type including surface preparation & filling of cracks, etc. complete and as directed by the Engineer.
Providing and fixing aluminium work for doors, window, Ventilators of fixed or sliding type both for glazing and wiremesh shutter with extruded built up standard tubular section/appropriate Z Section and other section of approved make confarming to IS-733 and IS-1985, fixed with rawl plugs and screw or with fixing clips or with expansion hold fasteners including filling of gaps at junctions at top, bottom and sides with weather silicon sealent, anodised Aluminium sections of required shade according to IS-1868 minimum anodic coating of grade AC-15 including cost of a cleat angle on, S. S. Screws and fitting of all types like tower bolt locking arrangement, handles, stoppers, etc., complete and as directed by the Engineer.
Providing and fixing 5 mm thickness ( Wt. not less than 12.50 Kg/Sqm. ) of clear float/frosted/Bajara sheet glass/laminated particle board to M/s. Triveni/Shree Vallabh/IAG/Modi guard/ Sint Gobin or other approved equivalent manufactuer and fixing with Aluminium frame work (door/window) including fixing aluminium channel beading and providing and fixing 2 way EDPM gasketing to ensure water and air tightness and neoprene cushions/gasket accommadated in grooves, necessary bronze anodised screws, etc, all complete generally as per drawings specifications and as directed by Engineer-in-Charge
Providing, fabricating, erecting and fixing in position at all heights upto a maximum height of 15 mtrs. With welded/bolted connection to all structural steel works for platform, stairs, ladders, beams, joints, bracings, columns, built up Section, etc. by using plates, beams, channels, angles, pipes, etc. conforming to IS 2062 of approved manufacturer including cost of all material labours, tools land tackles, machines, safety appliances, scaffolding, eltc. and painting with two coats of Epoxy paint (two or more coats) of approved make and shade over a coat of suitable primer, etc. complete and as directed by the Engineer.
Dismantling existing steel work in built up section upto a maximum height of 15 mtrs consisting of chequered plate, beam, channel, angles, railing pipes, gusset plates, bolts, nuts by cutting rivets, welding by unloading safely at ground and transporting within a limit of 500 mtrs. etc. complete and as directed by the Engineer.
Providing, fabricating, transporting, erecting and fixing in position upto a maximum height of 15 mtrs. M.S. gratings made out of MS flats of 25 x 6mm as main bar @ 40mm C/c and cross bars of 12 x 5mm @ 100mm C/c including edge bar of 25 x 6mm having necessary cutouts for platforms, landing walk way stairs treads etc. at all heights all complete including welding providing and fixing necessary clips to fix in position with structural supports and finished with two coats of Epoxy paint (two or more coats) of approved make and shade over a coat of suitable primer, all complete as per specifications and as directed by the Enginer.
Fabrication from existing dismantled section by cutting from old pipes, plates, angles channels, gratings etc by welding, erecting in penlion upto 15 m height, including cost of transportation labour consumables tools machine etc. and painting with two coats of Epoxy paint (two or more coats) of approved make and shade over a coat of suitable prime etc. complete and as directed by the Engineer.
Providing, fabricating, transporting and erecting M.S. black pipe hand railing (medium grade) around structural steel platform and on both sides of the stairs conforming to IS-1239 consisting of top rail 40 mm dia nominal bore and middle horizontal pipe of 32mm dia nominal bore with approvximately one meter height upright member of 32mm dia nominal bore at 1000mm distance C/c including all joints, bends, toe guard base plates including providing and fixing 100 x 6mm flat toe guard and painting with Epoxy paint (two or more coats) of approved make and shade over a coat of suitable primer all inclusive, upro a height of 15 m etc. complete and as directed by the Engineer.
Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6mm thick corrugated sheets (as per IS : 14871) ROOFING UPTO ANY PITCH AND HEIGHT UPTO 15 M, fixing with polymer coated `J' & `L' hooks, bolts and nuts 8mm dia, G.I. plain and bitumen washers or with self drilling fastener and EPD washers, etc. complete and as directed by the Engineer.
Providing and applying two or more coats of ready mix epoxy paint of 90 micron DFT of approved make and shade for various type of steel roof truss ,structure,gratings,Railing etc. erected in position at all locations and heights upto a height of 15M to give an even shade including cost of primmer wherever neccessery ,using spray gun wherever brush painting is not possible, cleaning the surface scaffolding, removing rust, dust, grease oil, peeled old paint, and suitable premire wherever required, etc. complete as per drawings, specifications and as directed by the Engineer.( The job will be carried out as per checklist to obtained desired thickness and to maintaining safe condition.) Note:- Out of total theortical quentity as calculated 50% quantity in first lot and balance 50% in 2nd lot have to be deposited at department custody.
Structure painting
Graiting & Plates painting
M.S. Railing
Removing existing old Asbestos Cement sheet roofing of the plant (ROOFING UPTO ANY PITCH AND HEIGHT UPTO 15 M), including ridges,hips,valleys,and gutters etc.,and stacking the servicable material within 50M lead, Cleaning the surface of all loose material throughly and disposing of all the removed material outside the Plants premises at risk and cost of the contractor.
Providing & fixing 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent,clear or pigmented, textured or smooth as specified.
Carting and disposing off all rubbish, broken concrete brick garbage, waste, papers and material outside the plant premises in the authorised dumping area as and when required at the risk and cost of the Contractor including all labours, tools and tackles, transport, etc. complete by help of Tractor trailer @ 3 m3 capacity (approx.)
Providing & fixing on Exposed or concealed surfaces the following dia. Chlorinated Polyvinyl Chloride (CPC) pipes,having thermal stabilty for hot & cold water supply,including all CPVC plain & brass threaded fittings,including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Pipe of specified class of M/s. SUPREME or other approved equivalent consisting following items of work: - i) Supplying & fixing CPVC pipes, including necessary all fittings conforming to IS Laying and fixing the pipe and specials on exposed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/screws, rawl plugs, wooden gutties and branded clamps of Supreme or equvalent make metal clamps with Rubber seal Supreme Cat. No.IGMCR 1 to 7 the pipeline exposed as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers catalogue for leak proof joint or as per relavant code. iv) Making leak proof threaded / welded joints, including cutting the pipe, cleaning, marking, heating, welding, cooling, etc. and the cost of jointing materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado, etc. for passing the pipe line and reinstating all the damage to its original condition, proof joints. vi) Providing and fixing CPVC weldable/threaded fittings such as Union, Niples, Bendes, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc. CPVC Pipes and fittings of Supreme or equvalent make. (Mode measurement: - The measurement shall per Unit RM length of pipe line laid or fixed. The measurement shall be taken along centre line of pipe. No measurement shall be recorded separately for fittings, etc.)
a) 15 mm nominal outer dia. pipes( Concealed work)
b) 20 mm nominal outer dia. Pipes ( Concealed work)
c) 25 mm nominal outer dia. Pipes (External work)
d) 32 mm nominal outer dia. Pipes (External work)
e) 40 mm nominal outer dia. Pipes (External work)
f) 50 mmnominal outer dia. Pipes (External work)
g) 65 mmnominal inner dia. Pipes (External work)
h) 80 mmnominal inner dia. Pipes (External work)
Providing and fixing in position heavy pattern screw down gun metal Gate Valve conforming to I.S. 778 with hand wheels at top including testing for 10 Kg./Sq.Cm. Pressure with clean and portable water with a minimum testing duration of two hours, etc. including removing gun metal Gate valve & returning to Dept. Stores, etc. as per specifications and as directed by the Engineer-in-Charge.
15 mm dia. Weight not less than 0.567 Kg.
20 mm n.b.Weight not less than 0.680 Kg.
25 mm n.b.Weight not less than 1.077 Kg.
32 mm n.b. Weight not less than 1.559 Kg.
40 mm n.b. Weight not less than 1.559 Kg.
50 mm n.b.Weight not less than 3.232 Kg.
80 mm n.b.Weight not less than 4.85 Kg.
Providing and fixing following C.P.Brass fittings of approved brand and as sample approved by Engineer In Charge.
Capston headed piller cock/ stop cock (Concealed)15 mm nominal dia
Capston headed long body bib cock 15 mm nominal dia
Capston headed stop cock (Concealed)15 mm nominal dia
Water Storage Tank :- Providing and fixing on Terrace PVC circular water storage tank of required (i.e. 500 Ltr or 1000 Ltr or 1500 or 2000 Ltr.) capacity SINTEX or equivalant approved make of IS : 12701 marked, mounted on a platform of roof slab including PVC cover, inlet, outlet, overflow and drainage connection including testing, etc. all complete as per drawings,specifications and as per direction of Engineer-In-Charge.
Providing and applyng one or more coats of best quality heat resistant silicone aluminium paint suitable upto a maximum temperature of 600°C over MS pipe/chimney or any suitable required surfaces including cleaning the surfaces, etc. complete and as directed by the Engineer.
Earth work in surface excavation by levelling and dressing of the ground upto a depth not exceeding 15 CM including disposal of excess earth outside plant premises in authorised dumping pit at the risk of Contractor, etc. complete and as directed by the Engineer.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan),W.C. pan with ISI marked white solid plastic seat and lid , 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with P or S trap, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required etc. complete as directed by Engineer Incharge.
Providing & fixing approved WHITE Orissa pattern W.C. comprising of Orissa pattern W.C. similar to M/s. Cera Sanitary make model no 2071 or equivalent make with 'P' or 'S' trap in white glazed viterous china ware of size 580 mm x 440 mm conformig to IS 7231, including the 10 Litr low level white P.V.C. flushing cisten M/s. Cera Sanitary make model no 2602P "Ciena Premium" or equivalent make including the cost of flush pipe removing the existing damaged/broken and making good the surrounding with cement mortar/concrete to the existing finish & disposing of debris out side colony etc. complete all as per specifications and as directed by the EIC.
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
Dismantling of bituminous road manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
Providing ,supplying and fixing different spare parts for Godrej knitting chairs Seat and backs as following sizes including cost of nut bolts,washers etc. complete as per direction of Engineer-in-charge.
Wooden frame Godrej knitting chair seat of size 18"x 15" .
Wooden frame Godrej knitting chair Back of size 18"x 15" .
Wooden frame Godrej knitting chair seat of size 18"x 18" .
Wooden frame Godrej knitting chair Back of size 18"x 18" .
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending
Providing and fixing 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including cost of S.S.tower bolt,150mm long S.S. aldrop,S.S.internal latch, door stoper, 35mm wide 2nd class teak batten lipping etc. complete as directed by Engineer in charge.
Supplying and fixing rolling shutters of approved make, made of 80x1.25 mm M.S. laths with 1.25 mm thick top cover, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters etc. all complete and providing and applying 2 coats of 1st quality synthetic enamel paint of approved make and shade over a coat of red oxide zinc chrome primer etc. all complete as per drawings, specifications and as directed by the engineer.
GUPTA & CO
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .