Memo. No. 3470 /NKDA/Engg-36/2010(XV)- Serial 03- Erection of Stainless steel railing, supplying, fitting and fixing of toughened glass panel, ACP for damaged portion of various Bldg. of NTBC campus

Amount

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (b) Two Coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) c) Super Protective 100% Acrylic Emulsion.

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge)

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. i) For trusses spanning up to 12.00 m

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm long

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iv) 1050 mm long

Supplying, fitting and fixing bib cock or stop cock. (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)

d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).

Engagement of mathor majdoor for cleaning of drains, sweeping / cleaning etc. of the premises of New Town Business Club, AE Block, Action Area - I, New Town, Kolkata & as per direction of EIC, rate is inclusive GST and all other taxes complete.

Supply & spreading of Bleaching powder along the drains & other places as and when required of the premises of New Town Business Club, AE Block, Action Area - I, New Town, Kolkata & as per direction of EIC, rate is inclusive GST and all other taxes complete.

Engagement of carpenter as and when required at New Town Business Club, AE Block, Action Area - I, New Town, Kolkata & as per direction of EIC, rate is inclusive GST and all other taxes complete.

Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (iii) 630 mm X 450 mm size

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe

Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary. (iii) Recess roll type size 150 mm X 150 mm

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (iv) 300mm x 19mm dia. bolt.

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (x) 300mm long x 12mm dia. bolt.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (b) With round base: (v) 150 mm grip x 12 mm dia rod.

Godrej Hydraulic door closer fitted and fixed complete. (a) Heavy type

Door stopper.(Brass)

(c) Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model - Tropical / Sumthing Special of ESSCO or similar).

Supplying, fitting & fixing of heavy duty hydraulic double action floor spring along with top pin/set of approved quality & as per direction of EIC, including all necessary accessories, rate is inclusive all taxes complete.

Supplying, fitting & fixing of 12mm thick coloured / tinted / toughened glass coforming to IS: 2553-1992 (Part-II) at various location of New Town Business Club, Action Area - I, New Town, Kolkata, fixing with stainless steel hinges (top & bottom) & including all necessary accessories & as per direction of EIC, rate is inclusive of labour, carriage, loading, unloading at site, scaffolding, GST & all other taxes complete.

Supplying, fitting & fixing P.V.C. Matt of approved quality & brand, rate is inclusive all other taxes complete.

Supply of decorative Garden Umbrella with stand side pole (Square shape) of size 2700 mm x 2700 mm and approved make & brand, including all necessary accessories, rate is inclusive of material, carriage, loading & unloading at site, GST & all other taxes complete.

Supply of PVC table of approved colour & brand, rate is inclusive of material, carriage, loading & unloading at site, GST & all other taxes complete.

Supply of Coir Matt approved quality, rate is inclusive GST & all other taxes complete.

Supply of towel approved quality & brand, rate is inclusive GST & all other taxes complete.

Providing & supplying of double bed sheet of size - 1875 mm (Wide) x 2010 mm (long) apprx. as per manufacturer's specification. The rate includes cost of material, labour, loading, unloading & transporting etc. including all taxes complete.

Providing & supplying of Pillow cover of size - 450 mm (Wide) x 590 mm (long) apprx. as per manufacturer's specification. The rate includes cost of material, labour, loading, unloading & transporting etc. including all taxes complete.

Supplying, fitting & fixing book self of size 900 mm wide x 1950 mm height x 450 mm depth, made with approved quality plyboard conforming to IS 710:1977 and laminated with intermediate supports between each row and column of rack including all necessary accessories complete & as per direction of EIC, inclusive all taxes complete.

Supply of digital wall clock of size 390 mm x 290 mm, approved quality & brand, rate is inclusive GST & all other taxes complete.

Supply & installation of 2 H.P. Pump at Swimming pools of approved make & brand & all other necessary accessories complete, rate is inclusive material, carriage, loading & unloading at site, GST & all other taxes complete.

Repairing & replacement of the sliding gates (02 Nos) at Car parking opposite New Town Business Club, AE Block, Action Area - I, New Town, Kolkata, supplying fitting & fixing of wheels, bearing etc. with necessary accessories, welding complete & as per ditrection of EIC, rate is inclusive material, labour, carriage, loading & unloading at site, GST & all other taxes complete.

Repairing & replacement of the sliding gate (2nd gate) at New Town Business Club, AE Block, Action Area - I, New Town, Kolkata, supplying fitting & fixing of wheels, bearing etc. with necessary accessories, welding complete & as per ditrection of EIC, rate is inclusive material, labour, carriage, loading & unloading at site, GST & all other taxes complete.

Repairing & replacement of damaged parts of existing pumps for Swimming pools under New Town Business Club, AE Block, Action Area - I, New Town, Kolkata, including all necessary accessories complete & as per direction of the EIC., including incidantal labour charges and all other taxes complete.

Supplying, making, fitting & fixing Flag of different colour of approved quality including incidantal labour charges and all other taxes complete.

i) Size- 7'x3' (apprx.)

ii) Size - 3'x2'6" (apprx.)

MODERN ENTERPRISE (BID ID -5540389)

VINAYAK ENTERPRISE (BID ID -5513888)

A. B. ENTERPRISE (BID ID -5513803)