Work order for Reconditioning work of Mechanical assembly and spares through Labour contract

Work order for Reconditioning work of Mechanical assembly & Spares through Labour Contract

Brake Drum Skimming work (Ashok Leyland & TATA)

Re-Conditioning of Lined Brake Shoes(Ashok Leyland & TATA)

Brake Drums Skimming work ( Leyland & TATA small bus)

Re-Conditioning of lined Brake Shoes(Leyland & TATA small bus)

Air Compressor Cylinder Boring and Re-Sleeving Works (Leyland & TATA) (Re-Sleeving and Boring of Air Compressor Cylinder Block to STD Size, Sleeve Outer Dia should be 82.50mm, Inner Dia Should be 80mm)

Dismantling, Cleaning & Washing of Old Front axle Assy. (Ashok Leyland & TATA )

Dismantling, Cleaning & Washing of Old Clutch kits (Ashok Leyland & TATA )

Dismantling, Cleaning & Washing of Old Crown Assemblies (Ashok Leyland & TATA )

Dismantling, Cleaning & Washing of Old Gearbox Assemblies (Ashok Leyland & TATA )

Dismantling, Cleaning & Washing of Old Engine Air Compressor (Ashok Leyland & TATA )

Dismantling & Assembling of Condemn Front axle Assy. (Ashok Leyland & TATA )

Dismantling & Assembling of Condemn Gearbox Assy. (Ashok Leyland & TATA )

Dismantling & Assembling of Condemn Crown Assy. (Ashok Leyland & TATA )

Re-Conditioning of Flywheel Assy. (Ashok Leyland) (Removing of Back plate, Surfacing the Back plate, Assembling the Back Plate with Shim to the correct measurement, Assembling the Back plate with Flywheel, Replacing defective flywheel ring, Checking and correcting the threaded holes.)

Re-Conditioning of Flywheel Assy. (TATA BSIV & Small bus model: LP1613, LP1515, LP712) (Removing of Back plate, Surfacing the Back plate, Assembling the Back Plate with Shim to the correct measurement, Assembling the Back plate with Flywheel, Replacing defective flywheel ring, Pilot bearing seating area, Checking and correcting the threaded holes. If necessary machinng works to be done)

Re-Conditioning and Conversion of Pressure Plate in to Face Plate (Two Side facing to reduce for 14 mm thickness, Turning works (OD-355mm and ID 195 mm), Drilling and tapping works of 12 holes with 8mm Dia in back side)

Re-Conditioning of Leyland Pressure Plate Facing work (Facing the Pressure Plate from 58 mm to 54 mm as per the Flywheel height required)

Re-Conditioning of TATA Pressure Plate Facing work (Facing the Pressure Plate from 40 mm to 37 mm as per the Flywheel height required)

Re-Conditioning of Leyland Clutch Disc (Removing of worn out Ceramic Pads, Refitting of New Ceramic Pads with 5.8mm Thickness)

Re-Conditioning of TATA Red Bus Clutch Disc (Removing of worn out Ceramic Pads, Refitting of New Ceramic Pads with 4.8mm Thickness)

Re-Conditioning of TATA Small Bus Clutch Disc (Model No. LP712) (Removing of worn out Organic facing and refitting of new Organic facing with 4.0mm thickness)

Re-Conditioning of TATA Small Bus Cover Assembly (Replacing Tensioner Plate, Pressure Plate Facing, Diaphragm Finger Seating Area to be Corrected).

Re-Conditioning of TATA BSIV Clutch Disc - 330 mm Dia (Model No. LP1613) (Removing of worn out Ceramic Pads, Refitting of New Ceramic Pads with 4.8mm Thickness)

Re-Conditioning of Leyland A/c bus Clutch Disc (Removing of worn out Organic pads, refitting of Organic pads with 4.5 mm Thickness)

Re-Conditioning of Leyland A/c bus Cover Assembly (Replacing of Tensioner Plate, Pressure Plate facing, DiaiPhragam Finger Seating are to be corrected)

Re-Conditioning of Leyland BSVI Clutch Disc (Removing of worn out Organic pads, Refitting of New Organic Pads with 4.5 mm Thickness)

Re-Conditioning of Leyland BSVI Cover Assembly (Replacing of Tensioner Plate, Pressure Plate facing, Diaphragam and Finger Seating are to be corrected)

Re-Conditioning Work of Clutch Disc Hub & Coil Spring Shake Arresting (Leyland & TATA) (Coil Spring & Coil Spring Plate to be Changed, Bend to be Removed)

Re-Conditioning work of Clutch Kit (Leyland) (Pressure plate – Machining works Withdrawal plate - Machining works Coil spring – Weight tension testing Clutch disc facing thickness check Clutch disc hub shake checking Assembling of flywheel with cover assembly & painting works.)

Re-Conditioning work of Clutch release bearing with fork (Leyland & TATA) (Dismantling, cleaning and Washing-Inspecting collar, withdrawl sleeve, retainer, bearing, housing, grease nipple threaded position. Replace the defective parts (Fork, pin, bush, etc.) with new spares and Release bearing seating area to be welded and grinded.)

Reconditioning work of Gear joint assembly (Leyland) (Dismantling, Cleaning and washing of 8 points roller bearing and spider, inspecting the seating area of gear joint. Replacing the defective parts with new spares. If necessary Welding and Machining works to be carried out and assembling to be done)

Re-Conditioning of Gear Linkage (BSIII) (Dismantling, Cleaning and Washing , LH Ball Joint with Nut should be replaced - 1 No. RH Ball Joint with Nut should be replaced - 2 Nos. Fulcurm Pin should be replaced - 1 No. Bimetal Bush should be should be replaced - 2 Nos. Connection Flange should be replaced - 1 No. (If Damaged) Welding work to be carried if necessary).

Re-Conditioning of Gear Linkage (SLF) (Dismantling, Cleaning and Washing , LH Ball Joint with Nut should be replaced - 1 No. RH Ball Joint with Nut should be replaced - 2 Nos. Fulcurm Pin should be replaced - 1 No. Bimetal Bush should be should be replaced - 2 Nos. Connection Flange should be replaced - 1 No. (If Damaged) Knuckle Ball Joint with Circlip should be replaced - 1 No. Knuckle should be replaced - 1 No. (If Damaged) Speed Changing Lever Bottom should be replaced - 1 No. (If Damaged) Welding work to be carried if necessary).

Re-Conditioning of Gear Linkage (BSIV) (Dismantling, Cleaning and Washing, LH Ball Joint with Nut should be replaced - 1 No. RH Ball Joint with Nut should be replaced - 2 Nos. Fulcurm Pin should be replaced - 1 No. Changing all 8 Needle bush. Welding work to be carried if necessary).

Reconditioning work of Gear Linkage (TATA) (Dismantling, Cleaning and Washing, Changing 2 Needle Bush, Changing RH Ball Joint-2 No’s, Reaction Tube, 2 Small Ball Joint to be changed.)

Re-Conditioning of Clutch Pedal Assembly (Dismantling, Cleaning and Washing , Clutch Pedal Shaft Welding and Turning to 31.5mm Diameter, Steel Bush Should be replaced - 2 Nos. Cotter Bolt & Nut Should be replaced Tread Plate should be replaced, Grease Nipple should be replaced.)

Conversion of Kingpin into Roller

Re –Conditioning Work of Leyland & TATA Spring Assembly (Front & Rear)

Re –Conditioning Work of TATA Small Bus Spring Assembly (Front & Rear)

Re –Conditioning of Jeep Leaf Spring Assembly

Spring Plate Cutting

Drilling Holes in Spring Plate

Condemned Spring Assembling (Front & Rear)

Re-Conditioning work of TATA BSIV Rear hub with Axle Shaft (Model No. LP1613) (Crown Side / Hub Side -Axle Shaft Milling Work)

Re-Conditioning of TATA Red Bus Rear hub with Axle Shaft (Model No. LP1515) (Crown Side / Hub Side -Axle Shaft Milling Work)

Re-Conditioning of TATA BSIV A/C Head Housing - Threading & Welding (Model No. LP1613)

Re-Conditioning work of Front Brake Chamber (Dismantling, Cleaning and Washing of brake chamber, inspecting the diaphragm & spring. Replace the defective parts with new spares. Assembling and test bench to be done.)

Re-Conditioning work of Rear Brake Chamber (Dismantling, Cleaning and Washing of brake chamber, inspecting the diaphragm & spring. Replace the defective parts with new spares. Assembling and test bench to be done.)

Re-Conditioning work of Brake Pedal (Dismantling, Cleaning and Washing -Inspecting the Threaded plate( rubber boot), Cotter bolt, Sleeve (2 nos), cotter pin and foot valve push rod. Replacing the defective parts with new spares)

Dismantling, Cleaning & Washing of DD unit (Leyalnd & TATA)

Dismantling, Cleaning & Washing of Air Dryer (Leyalnd & TATA)

Dismantling, Cleaning & Washing of Foot valve (Leyalnd & TATA)

Dismantling, Cleaning & Washing of Relay valve (Leyalnd & TATA)

Dismantling, Cleaning & Washing of Front Brake chamber (Leyalnd & TATA)

Dismantling, Cleaning & Washing of Rear Brake chamber (Leyalnd & TATA)

Dismantling, Cleaning & Washing of Slack Adjuster (Leyalnd & TATA)

Dismantling, Cleaning & Washing of Flick valve (Leyalnd & TATA)

Re-conditioning work of Door Cylinder Assembly (Leyland & TATA)

Outside22

Outside24

Outside25

Outside26

Outside27

Outside28

Sangeetha Auto Works

Inside2

Inside3

Inside4

Inside6

Inside7

Inside8

Inside9

Inside10

Inside11

Inside12

Inside13

Inside14

Inside15

Inside17

Inside18

Inside29

Outside31

Outside33

Outside35

Inside40

Inside41

Inside42

Inside43

Inside44

Inside45

Inside49

Inside50

Outside51

Inside52

Inside53

Inside54

Inside55

Inside56

Inside57

Inside58

Inside59

Inside60

MAHAA SREE MOTORS

Outside19

Outside20

Outside23

Outside28

Outside30

Outside32

Outside36

Outside37

Outside38

Outside39

Outside46

Outside47

Outside48

SRI VINAYAGA ENGINEERING WORKS

Outside34