Annual Repair and Maintenance of WSS Bhawarna Henja Malnoo, Energization of existing Hand Pump in Sullah Constituency in Tehsil Palampur Distt. Kangra (HP)

Providing & Fixing of 3.00 HP submersible pump set (Water field ) of Standard make Kirlosker/ KSB/Sabar brand/Cromption conforming to ISI Code 8034-1976 with upto date amendments. The pump should be capable of handling 50 metres head with (+) 10% and (-) 25% head range and it should be operation able with 240 volts single phasew AC Supply discharge should be1.50 litres / Sec. to 2.00 litres/Sec. as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing of water proof cable 3.00 core ,2.5 Sq.mm as per IS-674-Part-II-1964 suitable for above pump set from starter to Pump set subject to the approval of HPSEB authority as per the satisfaction of Engineer-in-Charge with in all leads and lifts.

Providing and fixing of high steel carbon rope size 5 millimetre square for holding of sub mersible pump set as per the satisfaction of Engineer-in-Charge with in all leads and lifts.

Providing of 3.00 HP automatic panel including auto start, auto stop and restart facility single phase preventer, timer, relay, selector switch auto and manually start stop facility prevention of phase reversal, imbalance and overload and fixed with compatible starter complete in all respect including as per direction of Engineer in charge .

Supply and fixing mild steel angle from steel 16 SWG fabricated floor mounting type switch board and capable of mounting the following accessories and with all internal electrical connection dully painted. The drawing of the pannel board will be subject to approval of engineer-in-charge.

Providing and fixing electric material for energisation of hand pump wooden board 3"x 3'' MCBICTP including switches, wire 3/29.1/18,7/22 fuse 32 Amp. DP switch with sheet insulation switch board nut & bolt and all other petty items required for electrical connection as per requirement complete in all respect as per the satisfaction of Engineer-in- charge.

Providing and fixing mild steel plate with nipple 40/50 milimeter dia welded, glavanised iron reducer 32/40 milimeter dia M.seal & PVC tapper etc. completein all respect as per the satisfaction of Engineer-in-charge.

Providing and fixing mild steel clamp with nipple 40/50 milimeter dia welded, glavanised iron reducer 32/40 milimeter dia M.seal & PVC tapper etc. completein all respect as per the satisfaction of Engineer-in-charge.

50 millimeter dia (PN-16).