Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹16.3 L
EMD Value
₹33,665
Closing Date
4 Nov 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE, NMD ,PHE Dte,
OFFICE OF THE EXECUTIVE ENGINEER ,NORTHERN MECHANICAL DIVISION ,PHE Dte.SILIGURI SUKANTA SARANI, PARESH NAGAR, SILIGURI, PIN 734001
Repairing of backwash pump along with 11 KV VCB panel at FULBARI WTP Site and repairing of gaseous chlorination system under Siliguri Comprehensive Water Supply Scheme
2026_PHED_5077512_1
WBPHED/EE/NMD/NIeT- 16 OF 2026-2027
Open Tender
MECHANICAL
Item Rate
30 days
Siliguri
Please refer Tender documents.
5 documents required · 5 mandatory
₹33,665
Yes
5 Oct 2026
5 Oct 2026
6 Nov 2026
6 Oct 2026
4 Nov 2026
6 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and delivery of Backwash Pump with required accessories for installation Hrizontal end Suction of following specification : Discharge - 300m3/hr ; Head : 32 mtr ; Casing CI ;Impeller - Bronze (Gr LTB2); Neckring- Bronze (Gr LTB5) ; Shaft and Shaft Sleeve- SS410; Gland Packing-Graphited Cotton;Motor not less than 45KW, 4P, 415 V +- 10%, 50 Hz, TEFC, IE 3 Efficiency Class , S1 Duty, IP 55, Insulation Class F | 1 | Set | - | - |
| 2 | Supply and delivery of Sluice Valve Rising Type ,Cast iron double flanged Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, PN 1. 6,outside screen rising
Spindle of IS 6603 Gr-12 cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximumn working pressure of 10/16 kg/sqcm (seat test) and body tested to 15/24 kg/sqcm 350 NB and above valves should be provided with enclosed gear box and antifriction device for ease of operation. All the valves should be tested by closed end method only.Valve Dia 300 MM | 1 | item | - | - |
| 3 | Supply and delivery of Single door NRV, Type Cast iron double flanged single door swing non-return valve generally conforming to IS:5312
Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of .st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm, Dia 300 MM, PN 1.6 | 1 | Set | - | - |
| 4 | Supply delivery of required length of short piece / adapter for making pipe line ready along with supplying high tension nut bolt , blank flange 30mm and gasket. | 1 | Item. | - | - |
| 5 | Dismantaling of sluice valve , NRV and pump motor set after disconnecting all electrical cable and mechanical joints taking proper safety arragement as per instruction of EIC. | 1 | Item. | - | - |
| 6 | Fitting fixing and testing, trial commissioning of newly supplied Pump Motor set along with Sluice valve and NRV with mending all good damages and as per instruction of EIC. | 1 | Set | - | - |
| 7 | Fitting fixing and testing, trial commissioning of newly supplied Pump Motor set along with Sluice valve and NRV with mending all good damages and as per instruction of EIC. | 1 | Set | - | - |
| 8 | Supply delivery and fitting fixing of vacuum interrupter , 12 KV , rated short time withstand current 26.3kA,Rated duration of Short time current 3 sec,Rated impulse withstand voltage 95kV,max contact bounce duration 0.002sec,max reboung during opening 1mm,cap switching capacity 550A, mech life 30000 percent,contact stroke 5mm,rated freq 50Hz,contact erosion limit 3mm,rated power freq withstand vol Air 38kV,rated normal current 1250A | 2 | Item. | - | - |
| 9 | Supply and fitting fixing of Switch Disconnector Fuse unit 400A with three nos DIN type 400A Fuse size 3 | 2 | Sets | - | - |
| 10 | Withdrawing of NBMCH pump from CWR after disconnecting all mechanical & electrical connections with the help of chainpulley arrangement. | 1 | item | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.64 MB
Tendernotice_2.pdf
PDF • 1.23 MB
Tendernotice_3.pdf
PDF • 26.41 MB
BOQ_5174932.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .