Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC HOUSE NO 120 1 NEAR HANUMAN MANDIR AT POST SHEL PIMPALGAON TAL KHED DIST PUNE PIN 411014 | PUNE | MAHARASHTRA | 411014 | ₹18.8 L Quoted ₹19.3 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹21.7 L+₹2.4 L (12.5%)Rejected-AOC HAVELI FALIYA NALIYA KUTCH 370 655 | KACHCHH | GUJARAT | 370655 | ₹21.7 L+₹2.4 L (12.5%) | L2 | Rejected-AOC Rejected |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
29 Dec 2020, 6:00 pmClosed
GE (AF) Naliya NO 01
GE Air Force Naliya
Attending day to day external water supply complaints including repair replacement of PVC OH tanks and water supply UG sumps Reserviors at various location at AF stn Naliya
2020_MES_382498_4
8714/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Naliya
As Per NIT
7 documents required · 7 mandatory
₹500
Yes
GE AF Naliya No.01
₹40,000
Yes
23 Jun 2021
15 Dec 2020
31 Dec 2020
15 Dec 2020
29 Dec 2020
15 Dec 2020
Amount
Labour only for attending day to day external/treated water supply complaints of all nature i.e leakage in water supply pipe lines/HDPE Pipe lines /STP pipe line, fitting/fixture, over flow of overhead tank, no water supply, taking out water from trenches during repair including noting the complaints in complaint register complete all as directed. Note for Srl Item No.1.00 (i) Any material required for attending complaints shall be measured and paid separately under respective item herein after. (ii) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced plumber as applicable assisted with adequate No of helpers as directed. (iii) The complaints shall be attended and defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 50/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues.Contractor rep shall be available wef 0800 hrs to 2000 Hrs to receive and notify the complaint. (iv) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 hrs the facts shall be brought to the notice of Engineer-in -charge by the contractor /his rep . If Engineer -in-charge is satisfied with contractors view, no recovery will be made. (v) while attending the complaint of water supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A' . However no extra payments shall be made for dewatering. (vi) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A. (vii) All T & P required for attending the complaints shall be provided by the contracor. (viii) The pipe fitter shall always be in possession of die set complete with cutters , Taps , Pipe wrench, Chain wrench,Caulking tools, Complete set of spanners and ladders etc…, as required at site.
Supply and fix in replacement 15mm bore GI Socket medium grade ISI Marked complete all as specified & as directed.
Description all as per Srl Item No. 2.00 here-in-before but of size 20 mm bore
Description all as per Srl Item No. 2.00 here-in-before but of size 25 mm bore
Description all as per Srl Item No. 2.00 here-in-before but of size 40 mm bore
Description all as per Srl Item No. 2.00 here-in-before but of size 50 mm bore
Description all as per Srl Item No. 2.00 here-in-before but of size 80 mm bore
Supply and fix in replacement 15mm bore GI Elbow Med grade ISI Marked complete all as specified & as directed.
Description all as per Srl Item No. 8.00 here-in-before but of size 20 mm bore
Description all as per Srl Item No. 8.00 here-in-before but of size 25 mm bore
Description all as per Srl Item No. 8.00 here-in-before but of size 40mm bore
Description all as per Srl Item No. 8.00 here-in-before but of size 50mm bore
Supply and fix in replacement 15 mm bore GI Union Medium Grade, ISI marked complete all as specified & as directed.
Description all as per Srl Item No. 13.00 here-in-before but of size 20 mm bore
Description all as per Srl Item No. 13.00 here-in-before but of size 25 mm bore
Description all as per Srl Item No. 13.00 here-in-before but of size 40 mm bore
Description all as per Srl Item No. 13.00 here-in-before but of size 50 mm bore
Supply and fix in replacement of 15mm bore GI Nipple of different length as per requirement, both end screwed Medium Grade, ISI marked complete all as specified & as directed.
Description all as per Srl Item No. 18.00 here-in-before but of size 20 mm bore
Description all as per Srl Item No. 18.00 here-in-before but of size 25 mm bore
Description all as per Srl Item No. 18.00 here-in-before but of size 40mm bore
Description all as per Srl Item No. 18.00 here-in-before but of size 50mm bore
Supply and fix 15mm bore PVC 'L' type Holder suitable for Aluminium rod,Float Ball etc all as required at site complete all as specified & as directed.
Description all as per Srl Item No. 23.00 here-in-before but of size 20 mm bore
Description all as per Srl Item No. 23.00 here-in-before but of size 25 mm bore
Supply and fix in replacement of 25 mmx15mm bore GI Reducing socket medium grade ISI marked complete all as specified & as directed.
Description all as per Srl Item No. 26.00 here-in-before but of size 20mmx15mm bore
Description all as per Srl Item No. 26.00 here-in-before but of size 25 mm x 20 mm bore
Description all as per Srl Item No. 26.00 here-in-before but of size 50 mmx 40mm bore
Description all as per Srl Item No. 26.00 here-in-before but of size 40 mmx 20mm bore
Description all as per Srl Item No. 26.00 here-in-before but of size 40 mmx 25mm bore
Description all as per Srl Item No. 26.00 here-in-before but of size 50mmx 25mm bore
Description all as per Srl Item No. 26.00 here-in-before but of size 80 mm x50/40/25mm bore
Supply and fix in replacement of 15mm x15mm x15mm GI Tee Med grade ISI Marked complete all as specified & as directed.
Description all as per Srl Item No. 34.00 here-in-before but of size 20 mm x 20 mm x 15 mm
Description all as per Srl Item No. 34.00 here-in-before but of size 20 mm x 20 mm x 20 mm
Description all as per Srl Item No. 34.00 here-in-before but of size 25 mm x 25 mm x 25 mm
Description all as per Srl Item No. 34.00 here-in-before but of size 25 mm x 25 mm x 15 mm
Description all as per Srl Item No. 34.00 here-in-before but of size 25 mm x 25 mm x 20 mm
Description all as per Srl Item No. 34.00 here-in-before but of size 40 mm x 40 mm x 40 mm
Description all as per Srl Item No. 34.00 here-in-before but of size 40 mm x 40 mm x 20 mm
Description all as per Srl Item No. 34.00 here-in-before but of size 40 mm x 40 mm x 25 mm
Supply fix in 15mm bore replacement of GI solid plug heavy duty ISI marked complete all as specified & as directed.
Description all as per Srl Item No. 43.00 here-in-before but of size 20 mm bore
Description all as per Srl Item No. 43.00 here-in-before but of size 25 mm bore
Description all as per Srl Item No. 43.00 here-in-before but of size 40 mm bore
Description all as per Srl Item No. 43.00 here-in-before but of size 50 mm bore
Material and Labour for Lead pig bar complete all as specified & as directed.
Material and labour for spun yarn complete all as specified & as directed.
Material and labour for lead wool complete all as specified & as directed.
Supply and fix 20mm bore PTMT float valve with epoxy coated aluminium rod and high density plastic ball complete all as specified & as directed.
Description all as per Srl Item No. 51.00 here-in-before but of size 25 mm bore
Description all as per Srl Item No. 51.00 here-in-before but of size 40 mm bore
Supply and fix 15mm bore gun metal gate valve with iron wheel head screwed both ends for iron pipe , ISI marked , as per IS : 778 complete all as specified and as directed.
Description all as per Srl Item No. 54.00 here-in-before but of size 20 mm bore
Description all as per Srl Item No. 54.00 here-in-before but of size 25 mm bore
Description all as per Srl Item No. 54.00 here-in-before but of size 40 mm bore
Description all as per Srl Item No. 54.00 here-in-before but of size 50 mm bore
Excvation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr deep for pipe line in soft/loose soil, getting out and levelling of bottom surface to required complete all as specified and as directed.
Returning filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
Removing excavated material from site to a distance not exc 50 m away and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.
Supply & fix 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe of size 15mm bore complete all as specified and as directed.
Supply and laying 15mm dia GI pipe medium grade ISI marked including all fittings in old/new position as in walls and ceilling/trenches including taking up or down old/rusted steel tubing with connection including cleaning for removal complete all as specified & as directed.
Description all as per Srl Item No. 63.00 here-in-before but of size 20 mm dia
Description all as per Srl Item No. 63.00 here-in-before but of size 25 mm dia
Description all as per Srl Item No. 63.00 here-in-before but of size 40 mm dia
Description all as per Srl Item No. 63.00 here-in-before but of size 50 mm dia
Description all as per Srl Item No. 63.00 here-in-before but of size 80 mm dia
Description all as per Srl Item No. 63.00 here-in-before but of size 100 mm dia
M & L for Cast iron/ DI fitting for flanged /spigot and socketed pipes such as bends, reducer, tee pieces, tail pieces, collar, cross, caps & plug upto 150mm bore complete all as specified & as directed.
Disconnecting , setting aside (or lowering if required ) and cleaning and removing all scale and dirt etc from not exceeding and including 500 ltrs HDPE water tanks (tanks placed on top of roof) and from mouths of circulating pipes etc, including washing the tank with bleaching powder and hoisting reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10.0 cm of each letter complete all as specified and as directed.
Description all as per Srl Item No. 71.00 here-in-before but exceeding 500 ltrs and upto and including 1000 ltrs
Description all as per Srl Item No. 71.00 here-in-before but exceeding 1000 ltrs and upto and including 2000 ltrs
S & F in repairs rotational moulded Poly-ethylene water storage tanks of 2000 ltrs capacity double layered with ISI marking embossed on it (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Description all as per Srl Item No. 74.00 here-in-before but cap of 10000 Ltrs PVC water storage tank
Description all as per Srl Item No. 74.00 here-in-before but cap of 5000 Ltrs PVC water storage tank
Description all as per Srl Item No. 74.00 here-in-before but cap of 1000 Ltrs PVC water storage tank
Description all as per Srl Item No. 74.00 here-in-before but cap of 500 Ltrs PVC water storage tank
S& F in repairs covers lid for 500/1000 litrs PVC over head tank complete all as specified and as directed.
De-watering the existing UG Sump of 2.00 lakh gallon capacity and cleaning the internal surfaces of sump to remove scales, mud and other foreign materials appying , surfaces with mixture of bleaching powder and water , finally washing with fresh water and treating with one coat of white wash to internal wall and bottom surfaces etc, complete for one time , including writting black capital letters " cleaned on (date) & due date " with letters height is not less than 5.0 CM complete all as specified and as directed.
De-watering the existing UG Sump of 0.50 lakh gallon capacity and cleaning the internal surfaces of sump to remove scales, mud and other foreign materials appying , surfaces with mixture of bleaching powder and water , finally washing with fresh water and treating with one coat of white wash to internal wall and bottom surfaces etc, complete for one time , including writting black capital letters " cleaned on (date) & due date " with letters height is not less than 5.0 CM complete all as specified and as directed.
De-watering the existing SWT/UG Sump of capacity upto 1.10 lakh ltrs capacity and cleaning the internal surfaces of SWT/UG sump to remove scales, mud and other foreign materials appying , surfaces with mixture of bleaching powder and water , finally washing with fresh water and treating with one coat of white wash to internal wall and bottom surfaces etc, complete for one time , including writting black capital letters " cleaned on (date) & due date " with letters height is not less than 5.0 CM complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including coping complete all as specified and as directed.
M&L for PCC (1:4:8) by using 40 mm graded stone aggregate for foundation complete all as specified and as directed.
M&L for PCC (1:2:4) type B-1 coping with 20mm graded aggregate for grouting MS frame complete all as specified and as directed.
Labour only for excavation muddy soil from pipe line leaked area upto desired depth fixing clamp/CT joint/Lead Joint /new pipe/fittings of required type and size of pipe line , againg stopping of leakage and checking of any leakage and returning filling of soil for 40 mm bore GI pipe line complete all as specified and as directed . Note :- Joint/Pipe will be measured and paid separately under relevant items.
Description all as per Srl Item No. 86.00 here-in-before but for 50 mm bore GI Pipe.
Description all as per Srl Item No. 86.00 here-in-before but for 80 mm bore GI Pipe.
Description all as per Srl Item No. 86.00 here-in-before but for 100 mm bore GI/CI/DI Pipe.
Description all as per Srl Item No. 86.00 here-in-before but for 150 mm bore GI/CI/DI Pipe.
Description all as per Srl Item No. 86.00 here-in-before but for 200 mm bore GI/CI/DI Pipe.
Supply only CT Joint suitable for 150 mm bore CI/DI/GI pipe line complete all as specified and as directed.
Supply only CT Joint suitable for 100 mm bore CI/DI/GI pipe line complete all as specified and as directed.
Supply only CT Joint suitable for 80 mm bore CI/DI/GI pipe line complete all as specified and as directed.
Supply only CT Joint suitable for 200 mm bore CI/DI/GI pipe line complete all as specified and as directed.
Supply only clamp suitable for 200 mm bore CI/DI pipe line complete all as specified and directed.
Supply only clamp suitable for 150 mm bore CI/DI pipe line complete all as specified and directed.
Supply only clamp suitable for 100 mm bore CI/DI/GI pipe line complete all as specified and directed.
Supply only clamp suitable for 80 mm bore CI/DI/GI pipe line complete all as specified and directed.
Supplying & fixing 15 mm bore gun metal check Nut Valves ,screwed both ends for iron pipe, ISI Marked, including taking out unserviceable gate valves complete all as specified and as directed.
Description all as per Srl Item No. 100.00 here-in-before but 20 mm bore
Description all as per Srl Item No. 100.00 here-in-before but 25 mm bore
M/s Gee Cee Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .