Construction, Testing and Commissioning of Chorgaliya Aamkhera Zone-III Water Supply Scheme at Haldwani Block District Nainital

Amount

Pump Related Electrical Items

Supply of Energy Submersible Pumpsets of various duty parameters, 2000Lpm of 140 mtr. Head.

Supply and fixing of 400 Amp TPN main switch 3 phase, 415 volt, 50 H havells make heavy duty double break main switch with HRC fuse making connection at this testing complete work etc at dewala talla tubewell.

Main piping and valves as per specification.

Supply of Heavy Duty Suitable 16mm thick MS Flanged, Cutting of Edges/Thread of column pipe for fixing of Heavy Duty suitable flange for two end on column pipe, fixing of 4 Nos. triangle corner each side on column pipe for supporting of flange, cutting of Grooves in flanges for submersible cable (2 Nos. on each side). Drilling of 8 hole on each side of flange for jointing of column pipe including supply of all labour T&P required for the proper completion of work.

150mm dia

150mm dia size column pipe clamps.

Supply of 3 Core flat submersible cable KSB make Conti Cable 3/35.0 sq.mm suitable for Submersible

Tool Kits

Lifting tackle 10 tonne capacity Chain pulley.

Installation.

INJECTING DOSER:

Supply & Installation of Electronically controlled,Electrically actuated,diaphragm operated,chemical metering pump,wall mounting suitable for deliveing up to 6 Litres of chemical solution/sodium hypochlorite solution per hour under maximum delivery pressure up to 10.0KG/cm2 and suction lift not less than 1.5 meter with accessories.

Miscellinous work

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 164.70(Outerside)

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Making connection with the existing M.S. Galvanised mains of upto 25mm nominal dia, including cutting and threading of pipe, bailing out water, fixing, if required, specials and testing etc. complete, but excluding cost of insertion pipes and specials besides boring out (and also subsequent back fill) existing main.

OHT Repair

Cleaner for Clean & Condition of OHT

high Voltage epoxy to arrest Leakages

15% Extra for Labour Charges.

Dismantling of Road

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately

Restoration of Road

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8(1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Earth work

Excavation in soil mixed with single boulders etc. requiring the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

Providing of all materiah Carting it from site store to site of work laying & Jointing of G.l pipcs confirming to IS : 1239 (PARI-1) including suplly of all jointing malerials Iike specials. white lead hemp and oil etc in trenches with its cutting, threading and testing of pipe linc etc complete.

G.I. PIPE CONFORMING TO IS : 1239 (PART-1) -2004

Medium Duty (Class 'B')

65 mm dia GI Pipe

80 mm dia GI Pipe

100 mm dia GI Pipe

Replacement and reparing of exsiting pipeline and Valve.

Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50m but excluding the cost of earth work (Note :- This item shall be paid with the condition that the recovered pipe from dismantling is reusable.)

Dismantling of G.I. pipes.

80 mm dia GI Pipe

Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc. etc.) in trenches with it's cutting, threading and testing of pipeline etc. complete.

80 mm dia GI Pipe

Welding Works

Making connection with the existing M.S. Galvanised mains of upto 25mm nominal dia, including cutting and threading of pipe, bailing out water, fixing, if required, specials and testing etc. complete, but excluding cost of insertion pipes and specials besides boring out (and also subsequent back fill) existing main.

Valve Chamber

Supplying of C.I. D/F Sluice Valves Confirming to IS: 14846-2000 (Kirloskar or equivalent) Valves Including Carting the same upto the site of work as per engineering norms (with cap) complete with bolts, nuts, rubber insertions etc. anywhere in uttarakhand.

C.I. D/F Sluice/ Gate Valve

Pressure PN 1.0

65 mm dia

80 mm dia

Supplying and Installation of Air Valves as per engineering norms of approved quality with bolts, nuts, rubber insertions etc. complete anywhere in uttarakhand

C.I. Air Valve Double Acting

50 mm dia

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. For in line pressure Transmeter in distribution network.

Flow Meter

Providing and Fixing Ultrasonic Water Flow Meter for Bulk pipe lines inline type, flange end with Integral mounted, Flow rate & Totaliser display, Battery operated (with five year battery life) Communication: UART/RS485, Suitable against antifraud attempts etc. including all necessary fittings complete.

At Distribution For DMA

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. For in line pressure Transmeter in distribution network.