Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹1.1 L
Closing Date
21 Jul 2026, 6:00 pm
Chief Officer Bhuj Nagarpalika
Re-Drilling of Tube well (300 mm dia x various depth) by D.R.Method at Kukma-Narmada No. - 4 Kukma-Narmada No. - 5,Kukma-Narmada No. - 9,Bhujodi No. - 1, Gayatri No. - 8, Gayatri No. - 9,Dhorava No. - 9, Dhorava No. - 10
319535
2026-27
Open
Water Equipments/ Meter/ Drilling/ Boring
Kutch
2 documents required · 2 mandatory
₹3,600
Chief Officer, Bhuj Nagar Palika
₹1.1 L
1 Jul 2026
1 Jul 2026
1 Jul 2026
21 Jul 2026
1 Jul 2026
NAME OF WORK :- Re-Drilling of Tube well (300 mm dia x various depth) by D.R.Method at Kukma-Narmada No. - 4 Kukma-Narmada No. -
5,Kukma-Narmada No. - 9,Bhujodi No. - 1, Gayatri No. - 8, Gayatri No. - 9,Dhorava No. - 9, Dhorava No. -
Quantities Tendered Rate
Item of work Unit according to
Rate in Figure estimated quantities
Drilling of bore hole in alluvial strata by direct rotary rig (250 /
Reamining of 600 mm pilot bore hole including assembling, lowering,
2 2308.00 housing, casing, strainer pipes gravel packing etc.complete (upto 1055.00 m
Supply of 300 mm dia. RCC plain pipes used in drilling of RCC tube
Supply of 300 mm dia. RCC Slotted (strainer) pipes used in drilling of
4 740.00 RCC tube wells. 480.95 Rmt
Best quality of well sorted sevaliya gravel of size 4mm to 6mm at site
5 368.00 if work including loading, unloading, carting etc.complete. 2029.00 m³
clamps made from M.S. plate with 3 holes on either side with nuts and
6 8.00 bolts of standard make and suitable size 900×100×16mm flat for 2265.27 Pair
300mm dia. pipe.
Bore plug having 100mm height made from MS plate with 3 holes at
equal distance on circumference for nut bolt type, locking
7 8.00 arrangement with nuts - bolts & lock nuts of standard make complete. 1150.12 No.
B) from 5 thick MS plate (for top also)suitable for 300mm dia. pipe
Bail plug of length 0.45 meter made from MS medium class pipe as
8 8.00 per IS suitable for 300mm dia. pipes. 1233.65 No.
Steel bent plate suitable to ERW pipe as 300mm dia. RCC pipes
(200×150×6mm size).
Compressor test of tube well by air compress or of 600 CFM/150 PSI
capacity in all districts.
A)Providing electric motor driven borewell submersible pump set
conforming to IS:8034 and motor conforms to IS :9283 working at
11 8.00 phase 400/440 Volt, 50 Hz AC supply & 2900 RPM. (with SS Empelar) 79778.00 No.
Cat No. 9.4 (LPM 1200/ 167 Mtr Head / Minimum 75 HP).
B)Providing Auto Transformer starter suitable for local & remote
pump control application consisting of aut transformer (Vacuum
impregnated, air cooled having three (3) tappings at 50%, 65% and
80%) incomer MCCB / MPCB, overload relay & contactors as per type-
12 8.00 II, coordianation including disgital MFM with RS 485 communication 65760.00 No.
port, analogue type ammeter with selector switch, run hour meter,
required protective relays and control accessories, ATS Cubical
control Panel Board A. T. S. from 71 to 80 HP
Quantities Tendered Rate
Item of work Unit according to
Rate in Figure estimated quantities
c) Providing PVC insulated Flat submersible cable as per technical
13 1960.00 specifications of R/c of GWSSB conforming to IS:694, IEC 652.00 Mtr
60227/60228, size 1RX3CX35 Sq. mm
Manufacture, supply and delivery of following ISI marked HDPE pipes
(IS:4984 /1985 with latest amendment) having material Grade PE-80
in approximate 100meter coil length or as per GWSSB requirement
14 1960.00 with SS 316 nipple at both ends having 11 TPI threads as per 392.00 Mtr.
specifications, press fitted and bolted having nominal diameter as
under as per detailed technical specifications. DN 110 PN-10
15 1960.00 Providing 40 mm dia Polypropylene rope 70.00 Mtr.
Lowering / Lifting of 3 phase submersible pump set with HDPE pipe
and cable into bore well with necessary fitting accessories by means
16 8.00 of mechanised derrick / chain pulley / fixtures and jointing the cable 2300.00 L.S. Job
with fuse unit / control panel board including satisfactory testing.
Above 150 to 300 meter depth
Note : gst will be paid as per government rules.
I/We am/are willing to carry out the work @............... % above/below ( Percent should be written in figures and
words ) The tendered amount mentioned above amount of my /our tender works out as under
Tendered amount Rs……………………….. Tendered amount Rs………………………..
Add ……...% above Rs…………………. Deduct ……...% Below Rs………………….
(Please strike out which ever is not applicable )
All work shall be carried out as per public works department handbook and other specifications of division or as directed.
Rates quoted inclusive of clearance of sight (prior to commencement of work and at its close) in all respect
and hold good for work under all conditions , sight, moisture, weather etc
one percent labor cess will be deducted from the valued work done as per ' Bulding and other construction
work welfare cess act' G.R. No. GHR - 2005/04/CWA/2004/841/M-3 Dt. 31/01/2005
Signature of the Contractor.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1. Standard Bidding Document Book.pdf
2.Invitation.pdf
3 Terms and Conditions.pdf
4. Sch-B.pdf
5 Bore accident_11.pdf
6 .PQ Criteria.pdf
Download all tender documents and submit your bid