Overhauling of Pumps and Replacement of New pumps on ORV SINDHU SADHANA

Amount

Overhauling of Pumps and Replacement of New pumps: The following Pumps to be removed,dismantled and fitted back. Bearings, sealing rings, O-rings and mechanical seal to be removed.Impeller, casing, shaft, sleeve, shaft key, bushes & wear rings to be inspected and worn out spares to be replaced with new spares. strictly avoid coldworks. Pump should be boxed up back and tried out for the performance test in the presence of ship staff/IRS. job includes dismantling and refitting after replacing the spares,alignment with motor,NDT checks,Alignment and Trueness reports,initial, final reports and calibration reports to be submitted.All spare are under CONTRACTOR Scope. No coldworks to be done on damaged Sea Water pump casing, impeller, shaft if found worn out. All Required spares,OEM spares(Bearings, sealing rings, O-rings and mechanical seals, sleeve, shaft key, bushes & wear rings,couplings) and consumables are procure,supply and fitment in contractor scope.

1.F.O. TRANSFER PUMP,MAKE-KSB,RPM-1500,MODEL-RC-3R,S.N-7633019,CAPACITY-40M3/hr,HEAD-20M

2.PURIFIER FEED PUMP,MAKE-GEA WESTFALIA SEPARATOR,RPM-1500,CAP-40M3/HR,MODEL-PUAG KF 25-WS-1,S.N-9085-2108-0000,P MAX-4BAR

03.ATGlycol Pump,MAKE-GRUNDFOS X,RPM-2899,Model-A97765805P11051817607/A99299216P11730834582,S.N-0001/0002,capacity-14.4/17M3/hr,H/Hmax-22/28.7m

4.HYDRAULIC OIL TRANSFER PUMP ,MAKE-KSB,RPM-1000,MODEL-RC-1 1/2,S.N-7632946,CapacitY- 5M3/hr,HEAD-30M

5.SLUDGE PUMP ,MAKE-KSB,RPM-1000,MODEL-RC-1 1/2,S.N-7632912,Capacity-5M3/hr,HEAD-30M

6.OILY WATER PUMP-MAKE-KSB,RPM-1500,MODEL-RC-1 1/2,S.N-763290,Capacity-05M3/hr,HEAD-30M

7.SANITARY HOT WATER PUMP,MAKE-HUNGARY,MODEL-A96516240P31144,S.N-0001/002Capacity-1.8M3/hr

8.BILGE PUMP,MAKE-KSB,RPM-1500,MODEL-EL-1900,S.N-7633035,Capacity-80M3/hr,HEAD-25M

9.BTGlycol Pump,MAKE-GRUNDFOS ,RPM-2864,MODEL-A97776981P91101,M3/hrCapacity-10 m3/hr,Serial no- 0001/0002,H/Hmax-15.3/20.2M,Type-CRN10-02A-FGJ-GX-E-HGGE.

10.BALLAST PUMP N0-2 ,MAKE-KSB,RPM-1500,MODEL-ILNCS-065/315B,S.N-7632862,Capacity-100 M3/hr,HEAD-30M

11.FIRE PUMP,MAKE-KSB,RPM-3000,MODEL-ILNCS-050-200B,S.N-7632896,Capacity-55M3/hr,HEAD-60M

12.BILGE / FIRE PUMP,MAKE-KSB,RPM-3000,MODEL-ILNCS-050-200B,S.N-7632805,Capacity-55 M3/hr,HEAD-60M

13.EMG. FIRE PUMP ,MAKE-KSB,RPM-3000,MODEL-ILNC-050/200B,S.N-7632904,Capacity-45 M3/hr,HEAD-60M

14.DECK WATER PUMP,MAKE-KSB,RPM-3000,MODEL-ILNCS-050/200A,S.N-7632821,Capacity-30 M3/hr,HEAD-60M

15.HW CIRCULATION PUMP ,MAKE-ALLWEILER AG,TYPE-NI-50-250/01U3D-W19-55/400,RPM-1500,MODELRC-3R,S.N-11058090,capacity-76 M3/HR,SPEED-2900RPM,HEAD-60M

16.FWG EJECTOR PUMP ,MAKE-Alfalaval,RPM-2880,Type-CNI 65-657160,S.N-CNI0328472,Capacity-6.60/18.9M3/hr

17.FWG DISTILLATE PUMP,Make-Alfa Laval,RPM-2770,

18.BILGE PUMP B.T ROOM-MAKE-KSB,RPM-1500,MODEL-EL-1900,S.N-7633050,Capacity-80 M3/hr,HEAD-25M

19. MAIN SW COOLING PUMPS - KSB- ILNC-80/2508 No. 7632888 pump no1&3

ER BILGE PUMP, Maker: Gettebebau NORD, Model- EL 1900, Serial no: 7633035

Fittment, commissioning of New Fresh Water pump along with motor and starter panel and trails to be showned to ship staff and surveyor. Job includes removal of old pump along with motor and starter panel from position, (New pump along with motor and starter panel will be supplied by HSL/SHIP)

Fittment, commissioning of New Sea Water pump along with motor and starter panel and trails to be showned to ship staff and surveyor. Job includes removal of old pump along with motor and starter panel from position, (New pump along with motor and starter panel will be supplied by HSL/SHIP)

Fittment, commissioning of New Anchor windlass hydraulic pump,motor and starter panel. trails to be showned to ship staff and surveyor. Job includes removal of old pump along with motor and starter panel from position, (New pump along with motor and starter panel will be supplied by HSL/SHIP)

SHRI GURUDATTA ENGINEERING WORKS

SRI SAI KRISHNA WORKS

GHR Marine Training & Certification Services Pvt. Ltd.

SRI BALAJI MARINE & CIVIL ENGINEERING WORKS