Construction of Weighbridge foundation, office cabin and Toilet at 8 different locations inside cargo jetty area

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (a) All kinds of soil / GSB filled area / Ashphalted surface

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. (i)All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Extra rate for conveying the excavated stuff by motor - truck a) Lead upto 2.50 km beyond 2.00 km.

Filling in Foundation with Black Trap stone Boulder including supply of Boulder and preparing surface complete.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size).

Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping / placing of concrete to site of laying including the cost of centering,shuttering, finishing but excluding the cost of reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (A) All works upto floor V level for Raft, Plinth Beam, tie beam, Column, Sill, Lintel, Chajja, Slab,wall, stair, landing, balconies etc.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete . (A) Thermo-Mechanically Treated bars of grade Fe- 500D or more.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) (I)Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: b) In superstructure above plinth level up to floor V level In: i) Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). a) First class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak and laminate with sunmica sheet 1mm thick on both faces & side of shutters. a) 50 mm thick including 3 nos ISI marked Cromium Plated Brass butt hinges of size 150 X 85 X 5.5mm (heavy type) with necessary screws.

Providing and fixing Cromium plated brass 150 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing Cromium plated Brass tower bolts, of approved quality with necessary screws etc. complete. a) 300x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.

Providing and fixing bright finished brass door latch with necessary screws etc. complete : a) 250x16x5 mm

Providing and fixing aluminium die cast body tubular type hydraulic door closer with necessary accessories and screws etc.

Providing and fixing factory made uPVC white colour sliding glazed window comprising of uPVC multi- chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg),G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc & cost of roller, Lock and all other fixtures required for window & filling the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per direction of Engineer-in- Charge. a) Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L'hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3 percent ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent,clear or pigmented, textured or smooth as specified. a) 2 mm thick flat

Plastering with cement mortar 1 : 4 including racking out joints, scrubbing & cleaning, finishing smooth curing etc. complete. a) for interior / Exterior plastering upto10 mtr Height. I) 10 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished including mixing of water proofing compound of Dr. Fixit Plaster Master or equivalent 200ml per 50 kg of cement.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over Kotah stone base / 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.(excluding cost of Kotah stone) Granite of any colour and shade (A) Area of slab over 0.50 sqm

Providing and laying Full body vitrified double charge floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 percent and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. (A) Size of Tile 600 x 600 mm (9 mm thick or as specified by manufacturer) I) Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge. a) Size of Tile 600 x 600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08 percent and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge. (a) Size of Tile 600 x 600 mm

Providing and laying the water proofing on terrace by providing avrage 90 mm thick of brick bat coba to necessary gradient and joint filled in CM 1:3 with mixing water proofing compound as per manufacturer' specification , rough to receive china mosaic (broken piece of china mosaic) of approved colour and pattern over top surface in CM 1:3 and with cement slurry, giving proper slope to drain out rain water, compaction, curing etc., complete all labour and materials as directed by Engineer-in-charge. (a) For work up to 10 MTR HEIGHT

Providing & fixing PVC Nahni trap 100 mm dia. with necessary fittings, making good the walls & floor, including cost of labour, materials etc., complete as directed.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer for all toilet

Providing and fixing brass bib cock of approved quality : (a) 15 mm nominal bore

Providing and fixing C.P .Brass Stop cock. (a) 15 mm dia. - weight 0.40 kg

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. a) Concealed work, including cutting chases and making good the walls etc. i) 15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110 mm

Providing, laying & jointing PVC pipes of required working pressure as per I.S.I. 4985 including cutting and jointing the pipe ends as per manufacturer's instructions including the cost of specials wherever required and, excavation and refilling of the trenches or fixing on walls or similar structures with clamps and testing the joints etc. complete as directed. a) Pipe 75 mm outer dia. working pressure 4kg/cm2.

Pipe 160 mm outer dia. working pressure 6 kg/cm2.

Providing & fixing SWR PVC (I.S.I - IS 13592) waste or vent pipe including necessary specials such as Tees, Bends, Y's Plinth offsets, Shoes , Vent cowl etc . with bracket , screws on wooden plugs fixed on wall face including filling joints with solution & cement mortar 1:2 complete as directed. a) 110 mm dia. (OD)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing signs board with a corrosion resistance 2mm thick aluminium alloy sheet with high intensity peismatic (HIP) grade retro reflectivesheet, including fixing on structure as directed including lettering overhead sign etc complete all laboursand materials as directed by engineer-in-charge (excluding cost of frame work). a) Overhead informatory road signage

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

providing Furniture of various size and category like good quality office table as per requirment of various offices. The table shall be manufactured on site as per the requirment having one bigger drawer on both side of the table for storage of files and two smaller sliding drawer on both side of table (i.e. two bigger drawer and four smaller drawer in each table) and one sliding drawer for keeping key board at middel of table, all the drawer fixed with good quality telescopic channel, brass hinges, brass screw. Table shall be manufacture with good quality of 18 to19 mm thick gurjan ply ISI marked with hard wood framing if required (only bottom of drawer should be made of 8 mm gurgan ply ISI mrked) and all the area of table top, table bottom, table sides, inner and outer side of drawer, key board drawer etc should be finished with best quality of 1 mm thick laminate sunmica sheet, Computerized key & locks, handle and all other required fixtures complete, 6mm thick plain glass over tabel all as per the direction of Engineer-in-charge. (Note:- For payment purpose area of table top should be measured)

Providing and fixing of cupboard / side rack 60 cm in depth & 75 cm in height made with 18 to 19 mm thick gurgan ply at top, side, back and bottom & two sliding shutter & two sliding shelves (only bottom of sliding shelves should be made from 8 mm thick gurgen ply remaining all is of 19 mm thick gurgen ply) all side , top, bottom inside and outside should be laminate with 1.0 mm thick sunmica sheet, Computerized key & locks, handle and all other required fixtures inculding cost of all the labour, materials, nails, fevicols, screws, taxes etc. complete as directed by Engineer-in-charge. (Note:- For payment purpose lengh of rack should be measured)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 5x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of 131 primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I

Item Description

providing & fixing of Roller blinds curtains on the windows with all necessary fixtures and all its accessories as per requirement and of approved colour and make complete with all labour and material etc. as directed by engineer in charge. (Brand and type will be approved and as per direction of Engineer-in-charge.)

providing & fixing of executive 360' revolving office chair with high back and ss body base with wheels & pneumatic up & down with one point locking mechanism + pu foam at seat and back ,fabric of make Godrej Interio, Neelkamal, Supreme, stylux. (Brand and type will be approved and as per direction of Engineer-in-charge.)

providing & fixing of visitor office chair with low back and with broad armrest and brake casters of make Godrej interio, neelkamal, supreme stylux. (Brand and type will be approved and as per direction of Engineer-in-charge.)

Item Description

Supply, Installation, Testing and commissioing of Feeder Panel for distribution of underground power supply as per technical specification No.1 (a) Feeder panel as per technical specification No. 1 (i) Supply

Installation, Testing and commissioing

Supply at site 4 Core, LT armoured aluminium conductor XLPE cable of 1.1kV grade of following type & size as per Technical Specification No. 2. (a) 4 Core X 16 Sq.mm

4 Core X 4 Sq.mm

Laying of LT armoured aluminium conductor XLPE cable of 1.1kV grade of size 4 core, 35 Sq.mm through following type as per Technical Specification No. 3. (a) Hard/Soft Soil

On wall through saddles & clamps

In GI Class-B Pipe

Providing & fixing following concealed wiring for single phase sub-circuit from the main switch /meter.DBs / MCBs to the switch board as per Technical Specification No.4. (a) with 2 x 2.5 sq.mm. copper conductor (single phase and neutral)

with 2 x 4 sq.mm. copper conductor (single phase and neutral)

Providing and Fixing concealed wiring for light/tube/bell point with PVC insulated single core standard 1.5 Sq.mm. copper conductor wire as per Technical Specification No. 5.

Providing and Fixing concealed wiring for Fan point with PVC insulated single core standard 1.5 Sq.mm. copper conductor wire & single/twin module step cut electronic fan regulator as case may be as per Technical Specification No. 6.

Providing and fixing concealed wiring for 5/6A X250 Volt. As per Technical Specification No. 7. (a) Half Plug Point.

Providing and fixing concealed wiring, for 15/16A X250 Volt Power point as per Technical Specification No. 8.

Providing and fixing concealed wiring, for AC Point 20A X 230 V with individual Switch & Socket as per Technical Specification No. 9.

Providing and fixing concealed wiring for 4 x 5/6A X250 Volt Plug point with 4 No. SP switches for computer as per Technical Specification No. 10.

Supply & Fixing of 4ft, LED Tube white Light Fixture of 36-40 Watt with complete accessories as per Technical Specification No. 11. (a) Supply

Fixing

Supply & Fixing of 18-20 Watt Sleek LED Down Light as per Technical Specification No. 12. (a) Supply

Fixing

Supply & Fixing of 1200mm sweep ordinary cealing fan with all accessories as per Technical Specification No. 13. (a) Supply

Fixing

Supply & Fixing of 225mm sweep Exhaust fan with all accessories as per Technical Specification No. 14. (a) Supply

Fixing

Supply & Fixing of 60 Watt LED Street light fixture with all accessories as per Technical Specification No. 15. (a)Supply

Fixing

Supply of Hot presss moulded SMC junction box with outer Dia 140 x 140 x 95 mm with left hinged door as per Technical Specification No. 16. (a) Supply

Fixing

Providing & fixing M S finish Double Door MCB distribution board with following ways from incoming/outgoing with suitable common bus bar and neutral link arrangement as per Technical Specification No. 17. (i) MCB DB - 12 ways (a) Supply

Fixing

MCB DB - 16 ways (a) Supply

Fixing

Providing & fixing following type of MCBs of approved make in distribution board with all necessary wiring & connection as per Technical Specification No. 18. (I) 40A, 415/440V, 4P (TPN) MCB (a) Supply

Fixing

6 -32 A 230/250V SP MCB (a) Supply

Fixing

RCCB, 4 Pole, 100 Amp. (a) Supply

Fixing

Preparation earthing station, chemical treated back filled compound earthing system with Pipe-In-Pipe 50 mm Dia GI type 2 Mtr Depth, Maintenance free. as per Technical Specification No. 19.

Supply, Laying, connecting of GI Strips Connecting earth station to the equipmement as per Technical Specification No. 20. (a) 25x3mm thick (I) Supply

Laying, connecting

Providing & connecting following type earth wire for earth station to Main DB / Meter/SB as per requirement as per Technical Specification No. 21. (a) 8 SWG GI earthing wire.