J&K

Cancelled

Works

Electrical Works

Re tubing of damaged Coolers (Heat Exchangers) at 3into35 MW LJHP Power House Baramulla

JKSPDC

LJHP POWER HOUSE | Baramulla, Jammu And Kashmir

Amount: ₹20 LCloses: 20 Jul 20262 Jul 2026Closed

Timeline

Published9 Jun 2026
Closed20 Jul 2026
Cancelled18 Aug 2026

Corrigenda

Corrigendum

4 updatesLatest on 16 Jul 2026Submission Ends:2 Jul 202620 Jul 2026

Date changes

Download Ends2 Jul 202620 Jul 2026Submission Ends2 Jul 202620 Jul 2026Bid Opening4 Jul 202621 Jul 2026

Cancellation Details

Cancellation of Tender

Cancellation NoticeCancellation NoticeReason: No Bids receivedDocument: cancelled_1.pdf

Published 18 Aug 2026

Tender Value

₹20 L

EMD Value

₹40,000

Closing Date

20 Jul 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer

Address

GENERATION DIVISION LJHP GANTAMULLA BARAMULLA

Work Description

Re tubing of damaged Coolers (Heat Exchangers) at 3into35 MW LJHP Power House Baramulla

Tender Information

Tender ID

2026_SPDC_311915_1

Reference Number

E-NIT No 14 of 2026-27 dated 08.06.2026

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Wise

Period of Work

75 days

Location

LJHP POWER HOUSE

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredSCANNED COPY OF PAN CARD (.pdf)

RequiredSCANNED COPY OF GST REGISTRATION CERTIFICATE (.pdf)

RequiredSCANNED COPY OF DEMAND DRAFT (COST OF TENDER DOCUMENT) (.pdf)

RequiredSCANNED COPY EMD (2 PERCENT OF ESTIMATED COST) OR MSME CERTIFICATE (.pdf)

RequiredSCANNED COPY OF EXPERIENCE CERTIFICATE AND WORK COMPLETION CERTIFICATE AND PERFORMANCE CERTIFICATE (.pdf)

RequiredSCANNED COPY OF TURNOVER CERTIFICATE (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,000

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

Executive Engineer

EMD Fee Amount

₹40,000

EMD Fee Exemption Allowed

Yes

Pre-Bid Meeting

Meeting Place

Executive Engineer

Important Dates

Last Activity

18 Aug 2026

Published

9 Jun 2026

Bid Opening

21 Jul 2026

Download Starts

9 Jun 2026

Download Ends

20 Jul 2026

Submission Starts

9 Jun 2026

Pre-Bid Meeting

15 Jun 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (5 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Complete Job of Retubing of Generator Hot Air coolers/heat exchangers of the hydro generators by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition of Cu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube length of 1.29 m	-	No's	-	-
2	Complete Job of Retubing of Turbine Guide bearings coolers/heat exchangers by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition of Cu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube length of 2.06 m	-	No's	-	-
3	Complete Job of Retubing of Transformer coolers/heat exchangers of 14 MVA Generator Transformers by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition of Cu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube length of 1.29 m	-	No's	-	-
4	Complete Job of Retubing of Thrust Bearing coolers/heat exchangers by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition of Cu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube of varied length 1.12 m to 0.5 m	-	No's	-	-
5	Complete Job of Retubing of Upper Guide bearing (UGB)coolers/heat exchangers by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition ofCu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube of length 0.99 m and 0.8 m	-	No's	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.37 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.37 MB

Tendernotice_2.pdf

PDF • 1.38 MB

Work Item Documents

BOQ_1009804.xls

BOQ • 0.34 MB

Corrigendum Documents

ExtensionNoticeNo03ofENITNo14of202627.pdf

PDF • 0.25 MB

ExtensionNoticeNo02ofENITNo14of202627.pdf

PDF • 0.24 MB

ExtensionNoticeofENITNo14of202627.pdf

PDF • 0.63 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Complete Job of Retubing of Generator Hot Air coolers/heat exchangers of the hydro generators by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition of Cu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube length of 1.29 m

No's

Complete Job of Retubing of Turbine Guide bearings coolers/heat exchangers by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition of Cu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube length of 2.06 m

No's

Complete Job of Retubing of Transformer coolers/heat exchangers of 14 MVA Generator Transformers by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition of Cu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube length of 1.29 m

No's

Complete Job of Retubing of Thrust Bearing coolers/heat exchangers by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition of Cu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube of varied length 1.12 m to 0.5 m

No's

Complete Job of Retubing of Upper Guide bearing (UGB)coolers/heat exchangers by way of replacement of Cu-Ni tubes by new ones conforming to IS 4503 as per existing ones. The Cu-Ni tubes should be of dia with min. thickness of as per IS 4503and chemical composition ofCu-Ni 70/30 conforming to ASTM B171/B171M-18 code. The job includes testing of the coolers at Contractors site and again at power house Tube OD of 19mm Tube of length 0.99 m and 0.8 m

No's