Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.0 Cr
EMD Value
₹8.0 L
Closing Date
23 Nov 2026, 3:25 pmDue tomorrow
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Regional Manager
RO Amaravati
Replacement of AC Sheet with Galvalume Sheet at CW Kakinada Nandikotkur Machillipatnam Gudivada and Nidamanuru AP
2026_CWC_297289_1
NIT_CWC/RO-Engg. /AMRVT/26-27/NIT.16
Open Tender
Civil Works
Works
150 days
Multiple Location described in NIT
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,190
Central Warehousing Corporation
₹8.0 L
9 Nov 2026
9 Nov 2026
24 Nov 2026
9 Nov 2026
23 Nov 2026
9 Nov 2026
Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per directions of Engineer-in-charge. (a) In cement mortar.
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead. AC sheets and accessories
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts nuts cutting rivets, welding etc., including dismembering and stacting within 50 meteres lead.
Brick work with bricks of class designation 75 in superstructure above plinth level and up to floor V level in cement mortar 1: 6 (1 cement: 6 Coarse sand)
12 mm Cement plaster of mix: a) 1:6 (1cement : 6 fine sand).
White washing with lime to give an even shade : a) New work ( 3 or more coats)
Providing gola 75x75 mm in cement concrete 1:2:4 (1cement: 2 coarse sand: 4 graded stone agg. 10 mm and down guage) including finishing with cement moratr 1:3 (1cement: 3 fine sand) as per standard desing in 75 x75 mm deep chase.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Credit to CWC on account of receipt of the following material. Note: quoted amount shall be deducted from the 1st R/A bill of the contractor. The contractor has to take away form the warehouse premises. No claim on this account shall be entertained.
Description
Dismantling of existing gola of size 75x75 mm including disposal of debrish and cost of labour etc. as per the directions of Engineer-in-charge.
"Providing and fixing at all height, on warehouse roof structure, pre-painted ZINCALUME/GALVALUME roof sheet (Make : Tata Bluescope Steel/ JSW Radiance) profiled roofing sheets of approved profile and colour (as per approved RAL), with minimum five major ribs having rib height between 28–32 mm and rib pitch between 180–220 mm, with subtle square fluting in the pan, and anti-capillary groove along return leg on end rib, fixed with self-drilling fasteners including EPDM washers, necessary overlaps, flashing, accessories, complete in all respects as per direction of Engineer-in-Charge Coil Specifications - The base steel of sheet material shall be 0.52 mm Base Metal Minimum Thickness (BMT) substrate and 0.6 mm minimum Total Painted Thickness (TPT), coated with hot-dipped Aluminium Zinc alloy coating AZ150 (i.e. minimum of 150 g per Sqm Al-Zn alloy coating mass total on both sides) having yield strength of 550MPa conforms to IS15961 and factory painted and oven baked with total 35 micron paint DFT conforms to IS15965- Durability class 3. On exposed surface of the sheet shall be having minimum 20-micron DFT of HDCS (based on Super Durable Polyster paint system )exterior quality paint system (free from Lead and heavy metals) over minimum 5-micron DFT corrosion inhibitive polyester primer and on reverse side of sheet shall have 5-micron DFT polyester coat over 5-micron corrosion inhibitive polyester primer. The paint system shall be Super Durable Polyster equivalent for durability class 3 (Category C3) or above as per IS 15965.Roofing sheets over warehoue roof and platform canopy (RAL 9002 ) " "The roof’s product should be dust proof and GRIHA or IGBC GreenPro certified Product. The steel manufacturer shall provide an Environmental Product Declaration (EPD) to the Central Warehousing Corporation, ensuring transparency in the material's environmental impact. The coated steel finish shall be free from defects and shall provide branding on back side with product details such as thickness, grade, coating mass, date, mfg. name and CWC. " "The steel manufacturers test certificate for the chemical and mechanical properties of steel must be approved by the concerned engineer authorised by Engineer-in-charge prior to installation. Material Warranty: Manufacturer through Contractor shall provide a written warranty for 20 yrs against perforation of metal roof panels due to corrosion under normal weather and atmospheric conditions and 12 yrs exterior paint film warranty against film cracking, peeling and color fading for roof and wall panels from coated steel supplier. The color panels shall not fade (Delta E) more than 6 in light color, not more than 9 in intermediate colors and not more than 12 in dark color, confirms to IS 15965:2012. Warranty shall be signed by both the metal roof system manufacturer and the contractor. Weather tightness warranty: Contractor shall provide a written weathertightness warranty for a minimum of 3 years against leaks in roof panels, arising out of or caused by ordinary wear,C3 environment and tear under C3 environment weather and atmospheric conditions. All coil batches used shall be traceable through mill test certificates, and coil IDs should be stamped and submitted with delivery challan /MTC/Invoice at site"
Providing and fixing factory-formed colour coated Galvalume ridge profile in cover width ranging from 900 mm to 1200 mm as per approved drawing of approved make (Tata Bluescope Colorbond / JSW Radiance or equivalent) in matching profile and colour to roof sheeting, made from precoated coil of base metal thickness not less than that of the roof sheet, aluminium-zinc alloy coating of AZ150 (minimum 150 g/m² total), minimum yield strength 550 MPa, and factory-applied Super Durable Polyester paint coating system of total DFT not less than 35 microns, including supply and fixing of UV-resistant foam filler blocks or equivalent profile-matched accessories to seal the gap between ridge and roof sheet, with all necessary self-drilling fasteners, EPDM washers, sealants, and overlaps to ensure a watertight joint, complete in all respects as per manufacturer’s specification and as directed by the Engineer-in-Charge(RAL 9002 )
Repair / Refilling gap between roof sheet and walls with cement concrete 1:1.5:3 ( 1 cement: 1.5 Coarse sand (Zone III), 3 graded stone aggregate 20 mm nominal size) and finishing/ leveling with avg 6 mm thick cement plaster both side of mix 1:3 ( 1 cement : 3 fine sand ) to match with existing wall plaster i/c scaffolding and all lead and lift complete as per direction of Engineer -in-charge.(avg thickness of CC 50 mm)
Total Amount (in Rs.)
Total Amount (in Rs.)
Items of works
All Items of Civil works based on DSR 2023
Market Rate
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.66 MB
PriceBidEtender.xls
Other Document • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .