REPAIRS TO INTERNAL ELECTRIFICATION INCLUDING FITTINGS AND FIXTURES ALONGWITH CONNECTED ITEMS IN OTM/MD QTRS AT BHUJ AND SIYOT AND REPAIR/REPLACEMENT OF EQPTS AND MISC OTHER WATER SUPPLY INSTALLATION AT MIL STN BHUJ UNDER GE ARMY BHUJ

Amount

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers (a) One light/buzzer point controlled by one; one way switch.

(b) One fan/exhaust fan point controlled by one, one way switch

(c) One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

(d) One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No. 2 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit pipe of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers (a) One light/buzzer point controlled by one; one way switch.

(b) One fan/exhaust fan point controlled by one, one way switch

(c) One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

(d) One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No. 07 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

S&F switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed.

S & F Bell push, flush type 5 AMP AC 230 Volt single pole complete as specified.

S&F switch socket outlet five pin, 5 Amps, flush type, 230 volts AC circuit complete all as specified and directed.

S&F switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed

Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed

Supply and fix modular fan regulator 120 W 2 module complete all as specified and directed

Supply and fix modular white cover plate with frame, 1 module complete all as specified and directed

Supply and fix modular white cover plate with frame, 2 module complete all as specified and directed

Supply and fix modular white cover plate with frame, 3 module complete all as specified and directed

Supply and fix modular white cover plate with frame, 4 module complete all as specified and directed

Supply and fix modular white cover plate with frame, 6 module complete all as specified and directed

Supply and fix modular white cover plate with frame, 8 module complete all as specified and directed

Supply and fix modular white cover plate with frame, 12 module complete all as specified and directed

Supply and fix modular white cover plate with frame, 16 module complete all as specified and directed

Supply and fix modular white cover plate with frame, 18 module complete all as specified and directed

S & F in repairs earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

S & F buzzer, ding dong AC 230 Volt single pole complete all as specified and directed

S&F fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including three core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED lamp fitting complete all as specified and directed

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for vertical type MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed

Taking down carefully MCBs, metal clad plug, distribution boards/main switches of any type and size and Supplying and fixing sheet metal enclosure powder painted for MCB DB vertical type TPN 4 way double door with dinrail and busbar with IP-43 protection with door earthing and isolated neutral bar and insulated busbar assembly including MCCB of 100 Amps complete all as specified and directed

Supply and fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces complete all as specified and directed

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 2.5 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and directed Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M/L for Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 4 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and directed Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

M&L for repair to light fittings, sockets, switches and bell and in any type, make and capacity and in any position including replacing unserviceable item or replacing whole fixture, fittings complete all as specified and directed. Note : The unserviceable item should be paid separately

Supplying and fixing LED 18 W Rod suitable for 1*18 W LED fitting suitable suitable for existing make complete all as specified and directed

S & F in replacement LED mirror light for photo frame complete all as specified and directed

S & F decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base complete all as specified and directed

S & F in replacement LED spot (recessed) white light 15 W round type AC 90 - 260 volts including all accessories and fixing arrangement complete all as specified and directed

S & F in replacement LED spot (recessed) white light 12 W round type AC 90 - 260 volts including all accessories and fixing arrangement complete all as specified and directed

S & F in replacement LED spot (recessed) white light 6 W round type AC 90 - 260 volts including all accessories and fixing arrangement complete all as specified and directed

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core 0.5 sqmm flexible copper conductor cases of suitable size complete all as specified and directed

Supply and fix LED 20 W high quality indoor batten type tube light fitting with PC housing and as well light application CCT 6000 K, electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed

Material and labour for installing, testing and commissioning fully automatic soft star delta starter panel for 75 HP centrifugal pumpset, locking arrangement, three phase, 430 V, 50 Hz, suiatble rating semiconductoer fuse, CRCA sheet 2mm thick metal enclosure, duly powder coated and angle iron frame which is made out of 50x50x6 mm angle iron, factory fabricated cubical type weather proof, mounting on floor, civil work, including following protection:- (i) Under voltage & Over Voltage (ii) Under load & Over load (iii) Single phase preventor (iv) phase reversal (v) Earth fault (vi) Short circuit (vii) Unbalanced voltage (Negative phase sequence relay) (viii) Switching surge Note : (i) 02 years warranty of starter from date of completion of work. Make L&T (cat No EMX4i-0135B-511) or other equvalent make as spicified in list of make .

Material and labour for providing following protection with CRCA sheet metal enclosure in existing star delta starter for 50 HP, three phase, 430 V, 50 Hz :- (i) digital voltmeter & Ameter, multifunctional meter, indicators (ii) Under voltage & Over Voltage (iii) Under load & Over load and CTs as per 50 HP pumpset (iv) Single phase preventor (v) phase reversal (vi) Earth fault (vii) Short circuit (viii) Unbalanced voltage (Negative phase sequence relay) (ix) Switching surge including installation & electric connection with lugs & phase separator, LED indicator (Trip & On ), CTs, copper busbar with colour coding sleeve,control wiring with copper wire and other allied work & items complete.

Material and labour for providing following protection with CRCA sheet metal enclosure in existing star delta starter for 35 HP, three phase, 430 V, 50 Hz :- (i) digital voltmeter & Ameter, multifunctional meter, indicators (ii) Under voltage & Over Voltage (iii) Under load & Over load (iv) Single phase preventor (v) phase reversal (vi) Earth fault (vii) Short circuit (viii) Unbalanced voltage (Negative phase sequence relay) (ix) Switching surge digital installation & electric connection with lugs & phase separator, LED indicator (Trip & On ), CTs, copper busbar with colour coding sleeve, control wiring with copper wire and other allied work & items complete.

Material and labour for providing following protection with CRCA sheet metal enclosure in existing star delta starter for 20 HP, three phase, 430 V, 50 Hz :- (i) digital voltmeter & Ameter, multifunctional meter, indicators (ii) Under voltage & Over Voltage (iii) Under load & Over load (iv) Single phase preventor (v) phase reversal (vi) Earth fault (vii) Short circuit (viii) Unbalanced voltage (Negative phase sequence relay) (ix) Switching surge including installation & electric connection with lugs & phase separator, LED indicator (Trip & On ), CTs, copper busbar with colour coding sleeve, control wiring with copper wire and other allied work & items complete.

Material and labour for installing, testing and commissioning alum dozer suitable for 6 MLD Water filtration plant, continuous operation, operational accuracy as per standard, variable flow rate, working pressure as per requirement,dosing tubing size & length and fittings as per requirement, connecting & testing, 220V,50 Hz complete all as specified and directed

Material and labour for installing, testing and commissioning chlorine dozer suitable for 6 MLD Water filtration plant, continuous operation, operational accuracy as per standard, variable flow rate, working pressure as per requirement, dosing tubing size & length and fittings as per requirement, connecting & testing, 220 V, 50 Hz complete all as specified and directed

Material and labour for agitator for existing alum tank 1500 ltr capacity, RPM as per requirement, correct concentration, proper mixing is important, agitator made of Stainless steel shaft, diameter and designed as per tank dimensions and Rigid, Compact and Maintenance free, 220V, 50 Hz complete all as specified and directed

Material and labour for agitator for existing chloring tank 1500 ltr capacity RPM as per requirement, correct concentration, proper mixing is important, agitator made of Stainless steel shaft, diameter and designed as per tank dimensions and Rigid, Compact and Maintenance free, 220 V, 50Hz complete all as specified and directed

Material and labour for repair of existing sand filter beds for 6 MLD capacity water filtration plant, repair of filter beds, cleaning of beds, providing filter media for filter beds as follows :- (i) Gravel and pabble size, thickness of layers and No. of layers as per existing (ii) Coarse sand size, thickness of layer and No. of layers as per existing (iii) fine sand size, thickness of layer and No. of layers as per existing complete all as specified and directed. Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

M&L for earthing complete with copper earth plate electrode 600mm X 600mm X 3.15mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to copper earth strip of 20 x 3 mm, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supplying, fixing, connecting & testing energy efficient LED street light fitting (Module system) having nominal power consumption 35 W with lamps, IP protection 65, with and including suitable GI pipe light grade, 1.5 Mtr long bracket made to shape and size with and angle of 120 degree fixed to poles etc with two nos of suitable clamps and connecting to over head lines with using 2.5 sqm aluminium conductor PVC insulated three core weather proof cable etc complete all as specified and directed.

Comprehensive maintenance of 63 KVA DG sets for routine/preventive maintenance, checking up of Engine and Alternator for smooth functioning and attending breakdowns/ complaints as and when required for smooth functioning of DG Set. The type of work/maintenance services to be carried out during comprehensive maintenance are as under:- (a) Cleaning of air filter (b) Checking and adjusting of valve tappet clearance (c) Checking of Engine lubrication system, fuel system, air system, cooling system, mechanical adjustments/rectification and electrical system. (d) Changing of lube oil filter if necessary (e) Changing/cleaning of fuel pre & fine filter (f) Checking and tightening of bolts and nuts (g) Checking of flexible rubber coupling (h) Checking of charging system of the battery. (i) Checking of ‘V’ belt and adjusting the tension (j) Checking of exhaust turbo charger (k) Checking of fuel injector (l) Checking and cleaning of breather pipe (m) Checking of alternator terminals and cable lighteners etc (n) Checking of safety controls operation (o) Checking of speed governors and engine shut down for proper functioning. (p) Checking of proper functioning of self starter and provision and battery charging (q) Greasing of generator (r) Carrying out preventive maintenance, checking as per manufacturer’s recommendations and to make proper functioning/serviceability of u/s RPM meter and hour meter and all engine parameters, gauges throughout the CA period and if required replace with new one without any extra cost.

Material and labour for radiator anticorrosive coolent conditioner properly mixed up with the radiator water complete all as specified and directed.

Material and labour for lubricant oil for diesel generating set of any capacity and any make complete all as specified and directed by Accepting officer

Supply only set of fuel pre-filters and fine filters as per sample and make of the following capacities of DG sets 63 KVA Note: Each set comprising of the complete pre/fine filters required at site

Supply only battery charger float cum booster 12 Amps, 220-240V/12-14-16 Voltssuitable for AMF panels complete all as specified and directed

Supply and fix in repiars the following items and disconnecting,taking out the old unserviceable one, including necessary lugs of any size and capacity wherever reqd :-

MCCB fixed Thermal & fixed Magnetic release 4 pole 63 Amps 16 KA complete all as specified and directed by Engr-in-charge

MCCB fixed Thermal & fixed Magnetic release 4 pole 100 Amps 16 KA complete all as specified and directed by Engr-in-charge

MCCB Adjustable Thermal & fixed Magnetic release 4 pole 160 Amps 36 KA complete all as specified and directed by Engr-in-charge

Changeover switch ON load type 100 Amps 4 Pole in sheet metal enclosure complete all as specified and directed by Engr-in-charge

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flat twin core cable of size 10 Sqmm complete all as specified and directed by Engr-in-charge

M&L for rewinding of induction motor capacity 5 HP motor after taking out all burnt U/S copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire includingvarnishing, baking, testing complete all as specified and directed by Engr-in-charge.

Supply and fix in repair / replacement RO membrane element of RO module suitable for 8 inch pressure tube of RO Plant complete all as specified and directed by Engr-in-charge

S&F in repair Bag filter 4" x 20", type multimedia filter, filtration grade - 5 micron, flow rate not less than 3000 ltrs / Hr complete all as specified and directed by Engr-in-charge

S&F in repair cartridge filter 2.5' x 20' long, flow rate not less than 3000 ltrs/Hr complete all as spcified and directed by Engr-in-charge.

Supply and fix High density polyethylene pipes of pressure rating 6 kgf/cm^2 laid in trenches / walls of dia 50 mm complete all as specified and directed by Accepting officer

Supply and laying Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of size 25mm dia complete all as specified and directed by Engr-in-charge

Taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by the Engineer-in-charge including insulating material such as illuminous paper, Letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of Engr-in-charge of ceiling fan/exhaust fan/Air circulators/Wall mounted fans/Pedestal fan complete as directed for the following Fans:- (a) Rewinding of motor of ceiling fans 1200/1400 mm sweep

Supplying only capacitor of capacity 2.5 mfd (PVC body) complete all as specified and directed.

Supplying only capacitor of capacity 4 mfd (PVC body) complete all as specified and directed.

Labour only for repairing and attending the complaint of Split/WindowAC/ Water cooler/Refrigerator/deep freezer by highly skilled tradesman and carryout minor repair and making functional complete all as specified and directed at site. Note :- (replacement of spare part will be measured and paid separately under appropriate items )

S&F compressor sealed unit suitable for 1.5 TR Capacity for any type of window AC Single Phase 230 Volts incl brazing to suction & discharge line vaccum testing with and including charging of refrigerant gas (R-22) & testing incl disconnecting and taking out existing defective compressor of any description & in any position complete all as specified and directed. Make, Kirloskar,Tecumsha, Whrilpool

M&L for charging of refrigerant gas R-22/R-410A complete unit or to make up required pressure in existing air conditioner, window type invertor split AC/hot & cold split AC of any description any capacity any make and in any position complete all as specified and directed complete all as specified and directed.

M&L for charging of refrigerant gas 134A/600A to make up the required pressure in any type refrigerator complete all as specified and as directed.

S&F in replacement of electric pump motor 1/80 HP single phase 230 Volts AC 50 Hz including connecting and testing etc complete suitable for desert cooler all as specified and directed by Engr-in-charge

S&F in replacement of electric fan motor 230V, AC, 50 HZ, for the following sizes of fans as suitable for desert cooler for 300 mm Sweep

S &F in replacement of plastic fan blade 3/4 wing suitable for motor 1/8 HP of desert cooler.

S & F in replacement LED spot (recessed) white light 15 W round type AC 90 - 260 volts including all accessories and fixing arrangement complete all as specified and directed

Supply only lead acid battery 12 V 135 AH, complete all as specified and directed,

Supply and fixing Nature switch integrated model, outdoor type timer control street light auto ON-OFF, for single phase load of maximum capacity 5 KW including incoming-outgoing MCBs,Power Contactor and SMC Enclosure for encasing complete single phase circuit board with nature switch-02. complete all as specified and directed by Engr-in-charge

Supply, install, test and commissioning of automatic star delta starter suitable for 5 HP Motor with thermal protection and single phasing protection, under/over voltage protection, earth fault protection, phase sequence protection, short current protection, over/under load protection, test to trip facility complete all as specified and directed by Engr-in-charge

Supply and fix motor protection circuit breaker (MPCB) IP 65 of suitable for 5 HP capacity of motor and suitable for IE2, IE 3, IE4 motors, of rated frequency of 50 HZ, impulse withstand voltage 6 KV, complete all as specified and directed by Engr-in-charge

Supply and lay Galvanized iron pipe, medium class of dia 50mm including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc laid in trenches/excavation/ bldgs complete all as specified and directed by Engr-in-charge Note : labour and material for excavation shall be measured and paid separately under appropriate item of Sch A

All as per item no 48 here in before but of dia 25mm complete

Supply and fix PP R gate valves (brass insert) of dia 50 mm complete all as specified and directed by Engr-in-charge

Supply and fix PP R gate valves (brass insert) of dia 25 mm complete all as specified and directed by Engr-in-charge