Preservation of Gurudwara at Chattipadshahi Baramulla B.W.O installation of RGB Lights at Gurudwara Chatti Padshahi Baramulla

Supply, installation, testing and comm. of 12.5 Mtr. Long high mast ( octagonal) shaft totally hot dip galvanised ( 85 microns conforming to IS 2629) through single dipping process and suitable for wind velocity of 180 Km/hour as per IS-875 ( part-III) . The one section mast shaft shall have door opening of adequate size at base having ante vandal type locking arrangement and door construction. it should also include acessories for 12.5 Mtr. high mast including head frame, steel wire rope 5 mm dia ( 7x19 construction) with safety factor not less than 5, drum winch, galvanized lantern carriage way suitable for carrying 6 No's flood lights and its control box ( excluding cost of lights and gear box) the mast should be provided with foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. the mast shall have an internal type power tool( Motor) mounted at the base compartment for its raising and lowering operation, complete with its operating mechanism. Bajaj/ crompton/Philips make.

Construction of suitable foundation for high mast considering the safe soil bearing capacity at site as per the design supplied with the mast with all materials ( steel, cement concreting etc.) and labour. cast insitu M 20 mixture n/s of agg. 20mm and min cement content of 300 Kg/m3 incld. cost of excavation , soling ( well compacted, consolidated, handpacked) inclusive of mudmat lean M 7.5 1:4:8 mix with n/s of agg. 40 m3 incld. cost of reinforcement Fe 500,cutting, bendings, straightening and cost of binding wire incld. cost of shuttering, curring, carriage of material ( all laps of reinforcement , ( concrete work & reinforcement detailing as per IS -456 latest and SP-16 & IS-13893)( complete Job.) Errection of mast with the help of suitable equipment. provision of GI pipe earthing for high mast with 2.5 Mt. long 40 mm dia GI pipe including connection of high mast earth terminal with 25x3mm GI flats with all materials and labour.

Providing of earthing using G.I plate earthing ( 2'x2') and G.I strip risers along with associated material as per I.S standards to the high mast.

Supply installation testing and comm. of flood light 300 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP66 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell ( JETA ARIS 300 W) /Wipro/Crompton make.

Supply/Installation/Testing & Commissioning of high quality outdoor type bullet camera 1/2.7" 4MP progressive scan imager,2.8-12 mm, Low light performance (0.035 lux in color mode), 50 m (165 ft) IR distance, depending on scene reflectance, IP 66, H.265+/H.265 Codec video compression, outdoor housing with IP66 ingress protection rating, on board camera storage: up to 256 GB micro SD card, Resolution - 4 Megapixel (1920 x 1080) or better Frame rate Up to 30 fps or better Lens Type - 2.8 to 12 mm varifocal lens Motorized IR Light & Distance - Ir Range up to 50 mtrs or better Day Night - Auto Day/Night with switchable IR cut filter. Intelligent Defog automatically adjusts parameters for best picture in foggy or misty scenes. POE power supply operation. Hikivision Make.

Supply/Installation/Testing & Commissioning of high quality 6 Port, PoE switch with 2 uplink port, power adaptor included Hi-Focus/Quantron Make.

Supply/Installation/Testing/Commissioning of 6 Channel Network Video Recorder (NVR) as per the Specifications Enclosed with a Hard Disk Memory of 4 TB Capacity with HDMI cable patch cards. HikVision Make.

Supply/Laying/Testing & Commissioning of UTP CAT 6 23 AWG solid ETL/ ROHS certified. , shielded, outdoor type cable of D-Link Make.

Supply & Installation of IP-20 & IK-08, UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door, Vertical Mounting Rail 1.6 MM with 'U'Marking, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware, 1 No of 19" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge For additional technical parameters of products/ work, BSRof CP-Plus Make Including Supply of power extension cord etc:- 4 U Rack with Width 600 mm & Depth 400 mm + 100 mm

Supply/Installation/Testing & Commissioning of good quality outoor POE Junction Box with PDU

Supplyand Laying of 25mm conduit pipe ISI marked along with all accessories like socket, bend, Saddles etc,to be laid 8 Inch underground including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required.

Wiring in 2 X 1.5 sq. mm in one run of FR PVC insulated copper conductor, single core cable in PVC conduit for power supply to Cameras of Havells/ Polycab/Anchor Make.