REPAIR/MAINT OF STREET LIGHTS GARDEN LIGHT AND HIGH MAST LIGHTS AND CONNECTED WORKS IN NAUSENABAUGH, NAVAL APRK, AMZARI PARK DEFENCE ROAD AND ALLIED AREAS UNDER AGE EM 1 OF GE (U I) VISAKHAPATNAM

Amount

Excavating in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation, trenches for laying poles/ cables/ pipe line etc. and getting out in soft/loose soil

Excavating in trenches n. exc. 1.5m wide and exc.upto 3 m in depth for foundation, trenches for laying poles bedding /cables/ pipe line etc. and getting out in soft/loose soil

Removing excavated materials to a distance n. exc. 50m and depositing where directed at a level n. exc 1.50m above the starting point.

Returning, filling in including spreading leveling watering and well ramming in layers not exc 25cm in any type of soil.

Supply and spreading clean dry sand for cable cushioning in trenches complete all as specified and as directed. (Note: Punned thickness only shall be measured)

Supply and laying sub class 'B' bricks of old size (23x11x7cm) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

M &L Plain cement concrete 1:4:8 type C2 (using 40 mm aggregrate) as in foundations filling mass concrete complete all as specified and directed

M &L for cement concrete PCC 1:2:4 type B1 (using 20 mm aggregrate) as coping of poles including removal old coping complete all as specified and directed

Supply and fix or laid in road crossing/ fixed to poles, GI Pipe of 50 MM size light grade for protection of cable complete all as directed

Cutting trench through road/ wall to a width of 20cm and depth of 30cm for inserting GI protection pipe for drawing cable and filling back the trench with PCC 1:3:6 type C1 complete all as directed.

S&F MCB TPN 63 amps 415 volts ,10ka complete all as specified and directed including taking out old one Make: : L&T / Schnieder /Hager/Siemens

M&L for preperation of old painted surface, cleaninig of oils, lubricants, grease etc complete of any type of 11.0 mtr long poles as per IS above PCC coping with applying 2 coats of aluminium paint including brackets, clamps and terminal boxes including 5 cm wide two nos red colour flourcent strip pasting on pole as directed and writing pole Nos all as specefied and directed.

M&L for preperation of old painted surface, cleaninig of oils, lubricants, grease etc complete of any type of 9.0 mtr long poles as per IS above PCC coping with applying 2 coats of aluminium paint including brackets, clamps and terminal boxes including 5 cm wide two nos red colour flourcent strip pasting on pole as directed and writing pole Nos all as specefied and directed.

Supply and replacement of multi core PVC insulated stranded copper conductor of size 1.5 sqmm 3 core cable to be connected with street light fittings to loop-in and out boxes with its end point terminal connection all as directed

Taking out unserviceable LT UG CABLE of any size and any type up to 70 Sq mm 3.5 core including necessary testing all as directed by engr -in-charge.

Relaying only serviceable LT UG CABLE of any size and any type up to 70 Sq mm 3.5 core received from item no 15 of above including jointing and testing material all as directed by Engr -in-charge. (NOTE:-Earth work ,sand coushiong and protection bricks & joint kits are meaured and paid separtely under respective schedule of item.)

M& L for heat shrinkable straight through joint for LT UG cable including jointing kits complete for making joints suitable for aluminium conducter cable of size incl fixtures and fittings etc complete all as specefied and directed. a) 3.5 core 70 sq mm complete all as specified and directed.

b) All as per Item No.17 here in before but size 3.5 core 35 sq mm / 50 sqmm

c)All as per Item No.17 here in before but size 3.5 core 16sqmm / 25 sq mm

Supplying,fixing and testing of Street lights LED 90 Watt with drive , 230 volts or nearest size pressure die cast aluminium housing luminaires with high power LED source ( mainting minmum system lumen-9000) on 09 mtr/11Mtr poles with IP protection 66 IK07 with 10 KV built in surge protection device, all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: Havells Model ENDURACITYLINERNEOSL90WLED757SASYBOTG or its Equivalent Philips/ GE/Wipro.

Supplying,fixing and testing of Street lights LED 170Watt with drive, 230 volts or nearest size pressure die cast aluminium housing luminaires with high power LED source ( maintaing minmum system lumen106000) on 09 mtr/11Mtr poles with IP protection 66 all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: Philips Cat No. BRP322LED163CWMRFGS4XTFCLGR or its equivalent in Havells/ GE/Wipro.

Supplying,fixing and testing of Gate light / post-top light fitting 35W / 40W LED or nearest size ( maintaing minmum system lumen-3500) with die cast aluminium body with drive, 230 volts or nearest size and with spun aluminium landscape luminaire and IP-65 protection with high power LED as source all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. make: Havells model no CORALPT35WLED757PSYMTOPC or its equivalent in Philips/GE/Wipro.

Supplying, fixing and testing of Garden light of 16W, 230 volts or nearest size with die cast aluminium landscape luminaire (mushroom) for down ward lighting with high power LED as light source body , IP-65, all necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: Havells model no MUSHROOMBL16WLED757SSYMTOPC or its equivalent in Philips/GE/Wipro.

Supplying,fixing and testing of landscape light for garden and slope areas 10W LED Integral decorative bollard inverted pyramid tripod with IP-65 protection ofall necessary fixing arrangments and fittings etc including taking out old one of any type complete all as specefied and directed. Make: CG model LBLSN-10-CDL or its equivalent in Havells/Philips/GE/WIPRO.

Supplying,fixing and testing of Flood light die cast aluminium of 120w, 230 volts or nearest size ( maintaing minmum system lumen-12000)with IP 66 including drive with all fixing arrangements with nuts&bolts,clamps, iron chanels on poles etc complete all as specified and directed by Engineer-in-Charge including taking out old one Make: Havells JETAIRISFLS120WLED757SYMLTG or its equivalent in Philips/GE/WIPRO.

Supplying,fixing and testing of Flood light die cast aluminium of 150w, 230 volts or nearest size ( maintaing minmum system lumen-15000) with IP 66 including drive with all fixing arrangements with nuts&bolts,clamps, iron chanels on poles etc complete all as specified and directed by Engineer-in-Charge including taking out old one Make: Havells JETAIRISFLS150WLED757PSYMLTG or its equivalent in Philips/GE/WIPRO.

Supplying,fixing and testing of Flood light die cast aluminium of 200w, 230 volts or nearest size ( maintaing minmum system lumen-20000) with IP 66 including inbuilt drive with all fixing arrangements with nuts&bolts,clamps, iron chanels on poles etc complete all as specified and directed by Engineer-in-Charge including taking out old one Make: Havells JETAIRISPLUSFLS200WLED757PSYMLTG or its equivalent in Philips/GE/WIPRO.

Supplying,fixing and testing of Flood light die cast aluminium of 200w, 230 volts or nearest size ( maintaing minmum system lumen-20000) die cast aluminium with IP 66 including with separate control drive for high mast / high rise application etc with all fixing arrangements with nuts&bolts,clamps, iron chanels, with cables to poles etc complete all as specified and directed by Engineer-in-Charge including taking out old one. Make: a) For LED fitting: Havells Cat No JETAVALOURFLS200WLED757MODSYMLTG or its equivalent in Philips/GE/WIPRO. b) For separate LED drive : Havells Cat NoLEDDRIVER ASSEMCGBOXVALOUR200WS or its equivalent in Philips/GE/WIPRO.

Supplying,fixing and testing of light fitting with LED tube including lamp holders to provide glare free light 1X20/22 W LED Ultra bright LED Tube ( maintaing minmum system lumen-2000) , 230 volts with all fixing arrangements with nuts&bolts,clamps complete all as specified and directed by Engineer-in-Charge including taking out old one. Make: Havells of REGALBATTENT8UPTO1X22WSSBSWH or its equivalent in GE/Wipro/Philips.

Supplying , fixing and testing of timer switch 65A 3 pole panel complete for street light controls analog time switch with connected items fixing on pole/wall/panels including PCC with all fixing arrangements complete , taking out old one etc all as directed of Make: Havells or its equalent in L&T / Siemens /Hager / Schneider.

S&F MCB SPN up to 32 amps 230 volts ,10 KA for resistive load complete all as specified and directed including taking out old one. Make: : L&T / Schneider /Hager/Siemens

S&F MCB SP up to 32 amps 230 volts , 10 KA for fixing in street light boxes / LT panel / DB's along with electric connections complete all as specified and directed including taking out old one. Make: : L&T / Schneider /Hager/Siemens

Supply & Laying in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 volts grade XLPE(FRLS) , armoured, electric power cables (heavy duty) with aluminium conductor of the following size . note: The rate quoted inclusive of termination at ends with suitable aluminium lugs whereever required Make : Finolex / Havells /Polycab /Plaza /Nicco

(a) 70 sqmm 3.5 core

(b) 50 sqmm 3.5 core

(c) 25 sqmm 4 core

(d) 16 sqmm 4 core

M& L for errection of vertically position steel tubular swaged poles complete with cast iron base plate,final taper plug,bolts,nuts & screws as specified type 410 sp-31(9.0 meters long) as per 15-2713(part III) Of 1980 and including three coats of black bituminious paint throughout internally and two coats externally on the pole embedded in concrete and applying two coats of aluminium paint over one coat of zinc chrome primer to the exposed surface all as directed. (NOTE:-Earth work ,pcc for foundation and copping etc meaured and paid separtely.)

M& L for errection of vertically position steel tubular swaged poles complete with cast iron base plate,final taper plug,bolts,nuts & screws as specified type 410 sp-55(11.0 meters long) as per 15-2713(part III) Of 1980 and applying three coats of black bituminious paint throughout internally and two coats externally on the pole embedded in concrete and applying two coat of zinc chrome primer to the exposed surface all as directed.(NOTE:-Earth work ,pcc for foundation and copping etc meaured and paid separtely.)

Supply and fix hot press moulded junction boxes with hinged door, fitted with 4 P ,50Amps rated connector and neutral link mounted in the box,including necessary fixing arangement to the steel tubular pole/over walls including taking out old one complete all as directed. Make; Sintex /Hansel Controls .

a) M&L for bracket for street light fitting made out of 40 mm bore pipe light grade GI tube bent to shape required, fixed with and including MS flat iron clamps -02 Nos, bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete including taking out old one as specefied and directed.

a) M&L for bracket for street light fitting made out of 20/25 mm bore pipe light grade GI tube bent to shape required, fixed with and including MS flat iron clamps -02 Nos, bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete including taking out old one as specefied and directed.

M& L for heat shrinkable straight through joint for LT UG cable including jointing kits complete for making joints suitable for aluminium conducter cable of size incl fixtures and fittings etc complete all as specefied and directed. a) 3.5 core 70 sq mm complete all as specified and directed.

b) All as per Item No.36 here in beforebut size 3.5 core 35 sq mm / 50 sqmm

c) All as per Item No.36 here in before but size 3.5 core 16sqmm / 25 sq mm

Supply and replace MCCB 4 pole, 415 V, adjustable type 400Amps with breaking capacity 35 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian/HPL/standard

Supply and replace MCCB 3 pole, 415 V, adjustable type 250 Amps with breaking capacity 25 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian/HPL/standard

Supplying, fixing and testing of URBAN Solar Bollard light LED ffitting of 4W with self powered lighting source and minimum maintenance of low power consumption and user friendly with (a) Solar PV module of, High effiecnecy poly Crystalline solar module and (b) Battery Maintenance free Lithium battery with expected life of 1000 cycles and back up for 2 days (c) LED High efficiency long life LED (d) PIR sensor control the dimming and brightness with range upto 3-4 Meter (e) Housing Elegant looking Die cast Aluminimum body +PC with IP65 protection (f) Warrenty 1 year Make : Havells Cat No. LHKNAWPFFN65K001 or equivalent in Philips/Bajaj

Supply and replace MCCB 3 pole, 415 V, adjustable type 200 Amps with breaking capacity 25 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian/HPL/standard

Supply and replace MCCB 3 pole, 415 V, fixed type upto 63 to 100 Amps with breaking capacity 25 KA including necessary modification in the panel complete all as specified and as directed. Make: GE/L&T/Havells/Indoasian/HPL/standard

Taking out the Loop in loop junction box , disconnet the cable connections and refixing the loop in loop box with cable connections with provision of new set of aluminium Lugs / thimbles of size 10 sqmm/ 16sqmm /25sqmm / 35 sqmm for 3.5 / 4.0 core existing LT cables of any type including provision of necessary tape insulation, clamps for fixing of cables ,fittings and fixtures, nut bolts, clamps etc complete all as specefied and directed.

Taking down defective street light fitting of any size /any type/ any capacity from height of pole/ walls/ high rise of any location of poles of 09 Mtr / 11 mtr height from ground level for reapir work and fixing back after repair work including checking, inspecting, testing and commissioning complete all as directed by Engr-in-Charge. Note : (a) Spares like ballast, lamp, starter, capacitor , igniter, holders, lamp holder, etc. shall be measured and paid separetely under relavant items of schedule'A' (b) Necessary tools like mobile ladder & other T&P required etc shall be arranged by the contractor (c) The rate quoted deemed to be inclusive for minor repair parts like nuts, bolts,cirle clips, clamps etc if required at site.

Taking down defective flood light / high mast fitting of any size /any type/any capacity from height of pole/ walls/ height mast of any location of poles any height from ground level for reapir work and fixing back after repair work including checking, inspecting, testing and commissioning complete all as directed by Engr-in-Charge. Note : (a) Spares like ballast, lamp, starter, capacitor , igniter, holders, lamp holder, etc. shall be measured and paid separetely under relavant items of schedule'A' (b) Necessary tools like mobile ladder& other T&P required etc shall be arranged by the contractor (c) The rate quoted deemed to be inclusive for minor repair parts like nuts, bolts,cirle clips, clamps etc if required at site.

Taking down defective Garden lights / Gate lights fitting of any size /any type/any capacity of any location on ground /pcc/ poles any height from ground level for reapir work and fixing back after repair work including checking, inspecting, testing and commissioning complete all as directed by Engr-in-Charge. Note : (a) Spares like ballast, lamp, starter, capacitor , igniter, holders, lamp holder, etc. shall be measured and paid separetely under relavant items of schedule'A' (b) Necessary tools like mobile ladder& other T&P required etc shall be arranged by the contractor (c) The rate quoted deemed to be inclusive for minor repair parts like nuts, bolts,cirle clips, clamps etc if required at site.

Supply the following spares for street light fittings of any type, any model as per existing parts as per site requirement (make : Phillips/ crompton Greaves / Havells / GE )

(a) Copper Ballast for fluroscent tube light 36/40W

(b) LED driver suitable for upto 45/90 Watt LED fitting as per site

(c) LED driver suitable form 100 watt to 150 Watt LED fitting as per site

(e)LED driver suitable for 200/250 Watt LED fitting as per site

(f) LED lamp retrofit type 9W

(g) LED lamp retrofit type 12W

(h) Lamp holder for garden lights / land scape /Gate lights of any type /any size / any modelas per site

(j)Ballast HPSV/MH 400 W all as direted by Engr-in charge

(k)Ballast HPSV/MH 250 W all as direted by Engr-in charge

(l)Electornic Igniter for HPSV/MH Lamps 70/150/250/400W all as direted by Engr-in charge

(m)Lamp MH 400 W with theard all as direted by Engr-in charge

(n)Lamp MH 250 W with theard all as direted by Engr-in charge

Supply & Fixed in repairs street light luminaire integral type LED fitting of 90 watts output with minimum 60 lumens per watt in aluminium die cast housing with IP 66 protection complete with all accessories incl driver and electronic surge protection device of min 5 KV complete all as specified. (Make: Philips, Cat No.BRP410 LED 091 CW HE MR PC S2 PSU GR ) complete

S&F in repairs single pahse automatic single dial time switch astro type (having longitude and latitude of Indian cities in memory) 250 volt. (Make : L&T / Secure / Legrand)

R AND A ASSOCIATES ENGINEERS CONTRACTORS

SONI ENGINEERS CONTRACTORS

VASISHTA ASSOCIATES

ANJANA ENTERPRISES

ESWAR ENTERPRISES

aswitha engineering works

SREE VIJAYALAKSHMI ENTERPRISES

M/S SRI VENKATA BHAVANI CONSTRUCTIONS

K APPAJI KUMAR AND CONSTRUCTIONS

JAI ENTERPRISES

VARADHI ENTERPRISES