Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC | L1 | Accepted-AOC BEING THE LOWEST BIDDER | |
| 2 | L2₹23.6 L+₹2.1 L (9.71%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 3 | L3₹23.7 L+₹2.1 L (9.93%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
REPAIR TO JOINT FILLING AND CRACKS IN RIGID PAVEMENT WITH ELASTOMERIC CONCRETE INCLUDING CONNECTED ITEMS OF WORKS AT AF STN BHUJ
2023_MES_581969_1
8648/V/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
GE (AF) BHUJ
₹50,000
Yes
30 Mar 2023
20 Feb 2023
22 Mar 2023
20 Feb 2023
20 Mar 2023
6 Mar 2023
27 Feb 2023 - 2 Mar 2023
Amount
Material & labour for cleaning and racking out the existing expansion joints 25mm to 35mm wide and upto required depth by appropriate hand tool (chisel and hammer or L hook) including removing the existing sealing compound from the edges with knife or anyother means such as chisel and hammer and grinding tool without damaging the edges and sides of the joints and removing the loose particle using wire brush and hot compressed air and priming the side of joints as per manufactures instruction, provision of 30 to 35mm thick polyethylene back up rod or appropriate de-bonding strip at bottom of joints and sealing the joints with 15mm (minimum depth of sealant) pitch free grey polyurethane sealant confirming to BS-5212 type FB and applying masking tape on edges or joints to prevent accidental spillage on top of surface and to give a neat finish to the sealant and removing the masking tape after sealant applied, the sealant should have MAF (+/-) 30 and manufacturers warranty of 10 years as uses in international air port in India complete all as specified and as directed by the Engr-in-Charge.
Material & labour for cleaning and racking out the existing contraction joints (dummy joints) 08mm to 10mm wide and upto required depth by appropriate hand tool (chisel and hammer or L hook) including removing the existing sealing compound from the edges with knife or anyother means such as chisel and hammer and grinding tool without damaging the edges and sides of the joints and removing the loose particle using wire brush and hot compressed air and priming the side of joints as per manufactures instruction, provision of 10 to 12mm thick polyethylene back up rod or appropriate de-bonding strip at bottom of joints and sealing the joints with 10mm (minimum depth of sealant) pitch free grey polyurethane sealant confirming to BS-5212 type FB and applying masking tape on edges or joints to prevent accidental spillage on top of surface and to give a neat finish to the sealant and removing the masking tape after sealant applied, the sealant should have MAF (+/-) 30 and manufacturers warranty of 10 years as uses in international air port in India complete all as specified and as directed by the Engr-in-Charge.
Material & labour for cleaning and racking out the existing contraction joints 08mm to 10mm wide and upto required depth by appropriate hand tool (chisel and hammer or L hook) including removing the existing sealing compound from the edges with knife or anyother means such as chisel and hammer and grinding tool without damaging the edges and sides of the joints and removing the loose particle using wire brush and hot compressed air and priming the side of joints as per manufactures instruction, provision of 10 to 12mm thick polyethylene back up rod or appropriate de-bonding strip at bottom of joints and sealing the joints with 10mm (minimum depth of sealant) pitch free grey polyurethane sealant confirming to BS-5212 type FB and applying masking tape on edges or joints to prevent accidental spillage on top of surface and to give a neat finish to the sealant and removing the masking tape after sealant applied, the sealant should have MAF (+/-) 30 and manufacturers warranty of 10 years as uses in international air port in India complete all as specified and as directed by the Engr-in-Charge.
Material & labour for cutting/chipping off carefully the cracks of runway/taxi track (hard concrete surfaces) in uniform width of cross sectional area with depth of 20 to 25mm, cleaning all dust, mud etc. Priming the cut portion of concrete surfaces with Flexopatch of Make : M/s Chowksy or any equivalent make as approved by GE and filling the cut portions of cracks to the required level to match with exisitng surfaces of concrete slab/ pavement with flexopatch mortar complete all as specified and directed by Engineer-in-Charge.
Material & labour for cutting existing loose patches/spalled edges of concrete pavement in geometrical shape to average depth 20 to 25 mm using diamond cutter or chisel and any other means and removing debris out side MD land sweeping the patches with broom cleaning with compressed air and applying epoxy resin primer @ 0.45 kg/sqm, filted with epoxy resin mortar proportion as per manufacture instruction including necessary form work and masking tape for sides of joints sprinkle thin layer of dust free fine sand(quartz sand 10 no) and applying a coat on top of surface with epoxy resin primer @ 0.45 kg/sqm and filling the joints with sealing compound complete all as specified and directed by Engineer-in-Charge. Note:- Sealing to joint shall be measured under respective item seperately
Material & labour for cutting grass manually and removing materials obtained from cutting/cleaning both sides of runway, PTT near DTGM board, Links, Cleaning of taxi track and other airfield area as per user requirement etc. complete all as specified and directed by Engineer-in-Charge. Note:- Contractor will arrange his own minimum 04 Nos. of labour form 09:00 AM to 05:00 PM (including lunch break of half an hour at mid day) every day and as reuquired, no extra claim admissible on this account by the contractor. However department will have the right to stop the work at any time due to security point of view.
ASHAPURA CONTRACTOR
M/s Pal Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .