Supply and Delivery of Hand Bores Materials for maintenance of Hand Bores in AE-8 Section, Work Division -III area. 1st Call General Funds

Supply and Delivery of the following materials suitable to Mark-2 hand bore spares as approved make including cost and conveyance of all materials etc complete as directed by the departmental authorities. for Bucket Washer

Supply and Delivery of the following materials suitable to Mark-2 hand bore spares as approved make including cost and conveyance of all materials etc complete as directed by the departmental authorities. for Axles

Supply and Delivery of the following materials suitable to Mark-2 hand bore spares as approved make including cost and conveyance of all materials etc complete as directed by the departmental authorities. for Pump bearing no 6204

Supply and Delivery of the following materials suitable to Mark-2 hand bore spares as approved make including cost and conveyance of all materials etc complete as directed by the departmental authorities. for Cealing rings

Supply and Delivery of the following materials suitable to Mark-2 hand bore spares as approved make including cost and conveyance of all materials etc complete as directed by the departmental authorities. for Pump bolts

Supply and Delivery of the following materials suitable to Mark-2 hand bore spares as approved make including cost and conveyance of all materials etc complete as directed by the departmental authorities. for Chain bolts

Supply and Delivery of the following materials suitable to Mark-2 hand bore spares as approved make including cost and conveyance of all materials etc complete as directed by the departmental authorities. for 32mm dis G.I Couplings

Manufacture, supply, & delivery of GI Pipes of various sizes and transportation anywhere in Andhra Pradesh, excluding GST. For 32mm GI 'B' Class Pipe

Manufacture, supply, & delivery of GI Pipes of various sizes and transportation anywhere in Andhra Pradesh, excluding GST. For 50mm GI 'B' Class Pipe

Manufacture, supply, & delivery of GI Pipes of various sizes and transportation anywhere in Andhra Pradesh, excluding GST. For 80mm GI 'B' Class Pipe

Manufacture, Supply and Delivery of DI/DF Gate valve (soft seatd) resilient seated soft sealing gate valves (sulice valves) with boby bonnet of ductile cast iron of grade GGG40/12 or equivelent grade as per I.S.3896/part-2 1985 and subsiquent revisions wedge fully rubber lined with EPDM food grade quality and seales of NBR and the valves should be of vacum tight and 100% leak proof with face to face dimensions as per BS 5163-89/IS 14846-2000/DIN 3202 F4 all the valves should be Electrostatic powder coating both inside and outside pocket less body passage Drilled as per IS 138.PN 16 For 50mm dia P.N-1.60

Manufacture, Supply and Delivery of DI/DF Gate valve (soft seatd) resilient seated soft sealing gate valves (sulice valves) with boby bonnet of ductile cast iron of grade GGG40/12 or equivelent grade as per I.S.3896/part-2 1985 and subsiquent revisions wedge fully rubber lined with EPDM food grade quality and seales of NBR and the valves should be of vacum tight and 100% leak proof with face to face dimensions as per BS 5163-89/IS 14846-2000/DIN 3202 F4 all the valves should be Electrostatic powder coating both inside and outside pocket less body passage Drilled as per IS 138.PN 16 For 80mm dia P.N-1.60

Manufacture, Supply and Delivery of DI/DF Gate valve (soft seatd) resilient seated soft sealing gate valves (sulice valves) with boby bonnet of ductile cast iron of grade GGG40/12 or equivelent grade as per I.S.3896/part-2 1985 and subsiquent revisions wedge fully rubber lined with EPDM food grade quality and seales of NBR and the valves should be of vacum tight and 100% leak proof with face to face dimensions as per BS 5163-89/IS 14846-2000/DIN 3202 F4 all the valves should be Electrostatic powder coating both inside and outside pocket less body passage Drilled as per IS 138.PN 16 For 100mm dia P.N-1.60

Manufacture, Supply and Delivery of DI/DF Gate valve (soft seatd) resilient seated soft sealing gate valves (sulice valves) with boby bonnet of ductile cast iron of grade GGG40/12 or equivelent grade as per I.S.3896/part-2 1985 and subsiquent revisions wedge fully rubber lined with EPDM food grade quality and seales of NBR and the valves should be of vacum tight and 100% leak proof with face to face dimensions as per BS 5163-89/IS 14846-2000/DIN 3202 F4 all the valves should be Electrostatic powder coating both inside and outside pocket less body passage Drilled as per IS 138.PN 16 For 150mm dia P.N-1.60

Supply and delivery of Mark-II Cylinders of approved make including cost, conveyance of all materials and labour charges etc

Supply and delivery of Welding electrodes 4mm dia speciales including cost, conveyance etc., complete

Supply, Delivery of ISI marked fully hot dipped galvanized deep well India Mark-H Hand Pump assembly complete unit with 10 Nos of connecting rods (bright bar of 12mm dia and 100 mts length each confirming to IS 9301/1990 & IS 14101 to 14104:1994 with their amendments/revisions but excluding taxes.