Construction of MBR for zoning of distribution network in Umerkote Municipality under State Plan, D.No.13-4215 SUJALA for the Year 2025-26

Cement concrete (1:2.4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Design, construction, testing and commissioning of ESR /MBR etc all complte as per direction of EIC A) Bhaluguda (5.00 lakh ltr capacity with ESR 25 mtr height)

B) Bhaluguda (MBR) 10.00 lakh ltr capacity

(Part-B) CW rising main & Laying D.I.Pipe & its ancillary works

Supplying of all materials labour T &P for Earth work excavation in all kinds of soil in pipe line trench within 1.50m initial lift and depositing the soil within 50m initial lead including rough dressing & leveling the bed etc complete as per direction of E.I.C.

Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class-K7 Conforming to IS:8329 - 2000 of the following nominal diameter including transportation from departmental store as per specification complete. (Earth work in trenches, jointing of pipes, specials and fittings to be measured separately).

300mm dia D.I.K9 Pipe

Supplying all materials,labour and T&P for filling foundation and plinth with excavated materials(in all kinds of soil)

Supplying all materials,labour and T&P and making tyton rubber ring joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete.(Labour Only)

(d) 300mm dia joints

Providing flanged joints conforming to IS:3114-1994 to flanged C.I/D.I pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete

(c) 300mm dia joints

Supplying all materials,labour and T&P for fixing of cast iron sluice valve or non-return valve with double flanged ends for water works purposes of the following rating and diameter diameter including testing of joints as per specification all complete

200mm.dia.C.I. S/V PN-1.6

300mm.dia.C.I. S/V PN-1.6

50mm.dia.DI Tamper proof Kinetic Air Valve

Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete. [0.75x0.75x1.485mtr] for 200mm. to 300mm .dia. S/V.

Laying of D.I. Speicals of different dia in trenchs as per P.H.Specification including of carriage of materials form store to site etc excludindg earth work & filling & cost of specials etc.

Supplying all materials,labour, T&P for laying in trenches MS Pipes of all classes conforming to IS3589-2001 & IS-3601-2006 of the following outside diameter as per specification complete (Earth work in trenches, jointing of pipes, specials and fitting to be measured separately)

300mm dia M.S.Pipe (5.6mm thick ness)

Fbaricating,supplying and fixing of M.S. Fittings for culvert crossing and interconnecton work in critical section etc.

300mm dia MS.Bend

300mmdia M.S flange

300mm dia C.I.M.J.Collor`

200mm dia C.I.M.J.Collor`

Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete

Cutting of C.C. Road for taking D.I. pipes through and making good the damages etc. as per direction of EIC.

Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Supplying all materials,labour and T&P for (Mending good of damaged road) Cement Concrete (1:4:8) uing 40mm size hand broken granite chips.

Supplying all materials,labour and T&P for (Mending good of damaged road) Cement concrete (1:2:4) with 12mm size hard granite chips.

Providing and laying of 60mm thick factory made cement concrete interlocking paver block of M 35 grade and approved make varoety colour and size made by block making machine block making machine with strong vibraatory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of sand etc complete coarse sand , filling the joints with the sand etc all complete including cost conveyance, royalties and taxes of all materials and cost of all labour, etc. complete as directed by Engineer in charge.

Supplying all materials,labour and T&P for Filling in foundatin and plinth with sand

Providing quarry dust in widening upto toe with well watered and rammed including cost of all materials etc complete as per direction of EIC.

(II)- Cost of C.I. Specials

(ii) Cost of Fittings

200mm.dia.C.I. S/V PN-1.6 - Reputed Make Cast Iron Valve confirming to IS Specifications may be considered to used in WTP,Pumping Station, Rising Main & Reservoir sites. Kirloskar / Vag/ Audco or equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846

300mm.dia.C.I. S/V PN-1.6 - Reputed Make Cast Iron Valve confirming to IS Specifications may be considered to used in WTP,Pumping Station, Rising Main & Reservoir sites. Kirloskar / Vag/ Audco or equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846

50mm.dia.DI Tamper proof Kinetic Air Valve

(Part-C) Distribution pipe line & Laying D.I.Pipe & its ancillary works

Supplying of all materials labour T &P for Earth work excavation in all kinds of soil in pipe line trench within 1.50m initial lift and depositing the soil within 50m initial lead including rough dressing & leveling the bed etc complete as per direction of E.I.C.

Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class-K7 Conforming to IS:8329 - 2000 of the following nominal diameter including transportation from departmental store as per specification complete. ( Earth work in trenches, jointing of pipes, specials and fittings to be measured separately).

100mm dia D.I.K7 Pipe

150mm dia D.I.K7 Pipe

200mm dia D.I.K7 Pipe

Supplying all materials,labour and T&P for filling foundation and plinth with excavated materials (in all kinds of soil)

Supplying all materials,labour and T&P and making tyton rubber ring joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete.(Labour Only)

(a) 100mm dia joints

(b) 150mm dia joints

(c) 200mm dia joints

Providing flanged joints conforming to IS:3114-1994 to flanged C.I/D.I pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete

(a) 100mm dia joints

(b) 150mm dia joints

(c) 200mm dia joints

Supplying all materials,labour and T&P for fixing of cast iron sluice valve or non-return valve with double flanged ends for water works purposes of the following rating and diameter diameter including testing of joints as per specification all complete

100mm.dia.C.I. S/V PN-1.6

150mm.dia.C.I. S/V PN-1.6

200mm.dia.C.I. S/V PN-1.6

50mm.dia.DI Tamper proof Kinetic Air Valve

80mm.dia.DI Tamper proof Kinetic Air Valve

Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete - [0.90x0.90x1.20mtr] for S/V.

Laying of D.I. Speicals of different dia in trenchs as per P.H.Specification including of carriage of materials form store to site etc excludindg earth work & filling & cost of specials etc.

Supplying all materials,labour, T&P for laying in trenches MS Pipes of all classes conforming to IS3589-2001 & IS-3601-2006 of the following outside diameter as per specification complete (Earth work in trenches, jointing of pipes, specials and fitting to be measured separately)

100mm dia M.S.Pipe (4.5mm thick ness)

150mm dia M.S.Pipe (4.5mm thick ness)

200mm dia M.S.Pipe (6.3mm thick ness)

Fbaricating,supplying and fixing of M.S. Fittings for culvert crossing and interconnecton work in critical section etc.

100mm dia MS.Bend

150mm dia MS.Bend

200mm dia MS.Bend

100mmdia M.S flange

150mmdia M.S flange

200mmdia M.S flange

100mm dia C.I.M.J.Collor`

150mm dia C.I.M.J.Collor`

200mm dia C.I.M.J.Collor`

Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete

Cutting of C.C. Road for taking D.I. pipes through and making good the damages etc. as per direction of EIC.

Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Supplying all materials,labour and T&P for (Mending good of damaged road) Cement Concrete (1:4:8) uing 40mm size hand broken granite chips.

Supplying all materials,labour and T&P for (Mending good of damaged road) Cement concrete (1:2:4) with 12mm size hard granite chips.

Supplying all materials,labour and T&P for Filling in foundatin and plinth with sand

Providing quarry dust in widening upto toe with well watered and rammed including cost of all materials etc complete as per direction of EIC.

Shifting House connection - Supplying all materials, Labour, T&P for replacement of house connection to newly layed pipe line at Malkangiri nity toilet from PH Department CI/DI pipe line to inside his campus including earth work for laying of service pipe 0.45m depth, refilling thr trenches after complete work, carriage of excess excavated materials from road side to 5km by mechanical transport, fixing 1/8" dia ferrule in the CI/DI pipe line , Cutting hole in the brick/stone/RCC masonary wall, repair the broken wall hole cutting by road with CC(1:2:4), cost of fitting, fitting, 1 no. of PVC tap of approved make etc. all complete as per technical & P.H Specification and direction of Engineer-in-Charge.

Construction of Thrust Block 300mm dia

(II)- Cost of C.I. Specials

(ii) Cost of Fittings

Per job

100mm.dia.C.I. S/V PN-1.6 of Kirloskar / Vag/ Audco or equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846

50mm.dia.DI Tamper proof Kinetic Air Valve

(Part-D) Pumping arrangement - Pump motor

Supplying, testing and commissioning of Contorl pannel of (Make - V-guard/ CG/ Kirloskar) etc all complete as per direction of EIC. (100HP)

200mm.dia.C.I. S/V PN-1.6 of Kirloskar / Vag/ Audco or equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846

150mm.dia.C.I. S/V PN-1.6 of Kirloskar / Vag/ Audco or equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846

Supplying, testing and commissioning of Centrifugal pump set having 35.00mtr head and 35 lps discharge (Make - V-guard/ CG/ Kirloskar) etc all complete as per direction of EIC. (30 HP - 2nos)

LT line Cable

Arrangement of suction and deilivery pipe line for pump installtion including construction of pump base foundation etc. complete as per direction of EIC.

(i) 200mm dia M.S Pipe (5.6mm thick)

(i) 150mm dia M.S Pipe (4.5mm thick)

(i)150mmdiaM.S 90 bend

(ii)150mm dia M.S.Flange

Supplying all materials,labour and T&P and making flanged joints for M.S pipes and specials of the following diameter including testing of joints as per specification all complete

(ii)150mm dia .Flange Joint

Supplying all materials,labour,T&P for cutting of M.S Plate/Pipe line work upto 4.5mm thick with cost of oxygen & acetelene gas transporation charges of all machineries etc all complete.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete

Supplying all materials,labour and T&P for fixing of cast iron sluice valve or non-return valve with double flanged ends for water works purposes of the following rating and diameter diameter including testing of joints as per specification all complete.(including cost of Valves)

(a) 150mm.dia.C.I. S/V.(1.6)

(a) 150mm.dia.C.I. NRV.(1.6)

Cost of (a) 150mm.dia.C.I. S/V.(1.6)

Cost of (a) 150mm.dia.C.I. NRV.(1.6)

Supplying all mateials, labour and T&P for construction of (4m x 8m) size Sunken Pump House including Desgin, dawing its ancillarywork etc. complete asp er direction of EIC.(4m x 6m)

(Part-E) Automation

Pressure Transmitter - Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE markd with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including Mounting arrangement Output 4-20 mA / HART ,Power supply - 24V DC ext. , Display - 4" LED , Accuracy Accuracy - +/- 0.1 % of full scale or better , Enclosure- IP 68

Level Transmitter

Level Transmitter - Designing, Supplying, installing,commissioning & testing of Ultrasonic level transmitter CE marked at each filter bed with following technical parameters Interfacing with PLC panel including mounting arrangement. Range - 0.5 mtr

Output - 4.20 mA/HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/1 0.25% of full scale or batter Enclosure - IP 68

Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100 mm1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 mtrs built in GSM/GPRS ( with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications

150 mm Nominal Diameter Flowmeter

200 mm Nominal Diameter Flowmeter

300 mm Nominal Diameter Flowmeter

Designing, Supplying, Installing, Commissioning & testing of Flow Control Valve / Pressure reducing valve for inlet with flow measuring, flow controlling, pressure monitering & web based with cable, PLC etc. complete. Hydraulically operated self-actuated Flow & Level Control Valve (either with float or altitude pilot) with downstream orifice having Ductile Iron valve body, Y-Pattern, Double chamber unitized actuator, Fusion bonded Epoxy coating, Copper control tubing, with Latching Solenoid & Pilot operated as per design, additional Speed control feature, drip tight sealing, Iֺn-line serviceable, Internals Stainless steel & protected diaphragm suitable for drinking water WRAS/NSF/DVGW approved

Design, manufacture, supply,installation, testing and commissioning of indoor type PLC panel of size approx. 1000 mm X 700 mm X 1500mm (LBH), fabricated out of min.2 mm thick CRCA sheet powder coated to Siemens gray color. The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & instruments at Raw water Pumphouse. PLC shall have Ethernet port & protocal for Modbus TCP communication with following IO. DI –16 num DO – 16 num AI –16 num AO – 8 num 7 inch color TFT HMI complete with programming shall be provided to interact with PLC. The panel shall include all the accessories (not limited to following) to achieve purpose of smooth & trouble free operation of pump house.

UPS - Supply, installation and commissioning of single phase 1 KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance fee battery system including cable power plug, switch having application in 24V lot DC battery (Drytype) charging to output continuous 3 hrs power backup all complete work (WTP-1 & MCC ROOM-1 Distribution-6)

GSM/GPRS modem - Supplying , Installing and Commissioning of SMS based ON / OFF operation of pumps at remote locations with test & trial including one year guaranty & two year comprehensive maintenance including SIM card & SMS charges. Wireless Motor Controller is suitable for all range of electrical motors and starters and pump sets. It shall protect pump set from dry run. Controller shall have inbuilt battery and charges automatically. Controller shall be controlled through SMS, Call, IVRS or Smart Phone application (All controlling modes are must). It shall have following features as, a. Auto Mode operation – Pump

Supplying,installation, testing and commissioning of VFD control pannel set of Reputed make etc. 30HP

22Kw. VFD

OFC: Supply and laying of 12Core unarmoured optical fiber cable (OFC Fiber glass with F-G 52.5/125Micron, 2.6DB/ KMF600) to various sites through HDPE Pipe/ in Air (Pole to pole) prelaying testing of each cable durm for each fiber and thaing the OTDR tracs, submission of OTDR traces (iin hard as well as soft copy ) to EIC/ Site Engineer.

Laying and Installation of OFC System

HDPE PIPE: Supply and Laying of 40MM dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.

Supply of 1.5 sqmm x 12 Core CU.Armourded cable

Supplying and instalaltion of termination of 1.5sqmm x 12 Core CU. Armoured Cable

Supply of 1.5 sqmm x 4 Core CU.Armourded cable

Supplying and installation termination of 1.5 sqmm x 4 Core CU. Armored Cable

Supply of 1Pair x 1.5 sqmm Overall shielded -Armored cable

Supplying and installation of termination of 2 Pair x 2.5 sqmm CU. Armoured Cable

10 sq mm 3 Core Cu Unarmoured cable

19 mm DC Gland

2.5 mm CU socket

Supplying all materials, for providing mechanical joints to flange socket as per relevant IS with suitable fanged joints of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer‐in‐charge.

150 mm dia MJ Socket

200 mm dia MJ Socket

Advance lighting arrester

Chemical earthing

(Part-A) Construction of Boundary Wall

Earth work in ordinary soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed

Cement Concrete (1:4:8) uing 40mm size hand broken granite chips.

CC(1:3:6) with 4cm.crusher brokn Granite metal

Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percent in cement mortar (1:3) in foundation and plinth

12mm. thick cement plaster in cement mor

tar (1:3) for brick work.

Finishing walls with water proofing cement of approved shade on new work two coats to give an even shade including cost of brushes and putty.

Fabricating, Supplying and fixing of M.S window grill made out of M.S flat 20mm x 4mm including labour charge for fixing etc complete

(Part-G) Site Development - Construction of paver block road

Earth work in ordinary soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed

Providing and laying of 60mm thick factory made cement concrete interlocking paver block of M-35 grade and approved make varoety colour and size made by block making machine block making machine with strong vibratory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of sand etc.complete coarse sand, filling the joints with the samd etc.all complete including cost conveyance, royalities and taxes of all materials and cost of all labour, etc.all complete as per the direction by EIC

(Part-H) Construction of CC Road