KSD/Tender/Staff quarter civil work at survey no 8/3, utility work and paver block work for staff quarter at survey no 8/3, & R.C.C. road and paver block work at sarhad dairy milk processing plant at chandrani-kutch Gujarat/2025-26

Clearing and grubbing land includingng uprooting rank, vegetation, grass bushes, shrubs, saplings and trees etc. complete. [S.O.R. Sr.No. 26117A It. No. 0 P./215]

Excavation for Foundation For Depth from 1.5 m to 3 m depth including sorting out and stacking of useful material and disposing off the excavated stuff up to 50 m lead. [S.O.R. Sr. No. 04002C It. No. 0 P./64]

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 aggregate) and curring complete including cost of form work in foundation. [S.O.R. Sr. No. 05003A It. No. 5.3.2 P./68]

Providing and laying controlled cement concrete M-20 and curing complete Excluding the cost of form work and Reinforcement for reinforced concrete work. [S.O.R. Sr. NO. 05024EA It. No. 5.8.2 P./73]

Providing formwork of ordinary timber planking so as to give rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work. [S.O.R. Sr. No. 09002AA It. No. 9.2 P./92]

Providing TMT bar FE 500D reinforcement for R.C.C. work including cutting, bending, binding and placing in position complete. [S.O.R. Sr. No. 05014C It. No. 5.4.11 P./70]

Back Filling available excavated earth in foundation [S.O.R. Sr. No. 04006 It. No. 4.12 P./66]

Providing and laying Hard Stone (Toda) in Soling

Uncoursed Rubble Masonry with hard stone of approved quality in foundations and plinth in Cement Mortar 1:5 (1-cement : 5-coarse sand including levelling up etc. complete (upto 10 ton) [S.O.R. Sr. No. 07001BA It. No. 7.6 P./88]

Carring out Plinth Treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and materials consistent with I.S.I. specification. Using Chlordene and Chiorpurfiles 20 EC. As per 6131 paret II Consentration Weight one percent is recommended i.e. one liter 20 EC chemical emulsion with 19 liter give 1 Persentege concrentration inclusive of one liter chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S. [S.O.R Sr.No. 22007 It.No. 0 / P. 151]

Precast Concrete Block Masonry (including quoin blocks jamb blocks closer etc) with solid concrete blocks of approved size made of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregates of 20 mm and down grade) in foundation and plinth cement mortar 1:6 including leveling up etc. complete. Super Structure/TERRACE FLOOR [S.O.R. Sr. No. 07012A It. No. 7.75 P./89]

Providing 15mm. Thick cement plaster in single coat on rough (similar) side Block/concrete walls & ceilings for interior plastering complete in cement mortar 1:4 [S.O.R. Sr. No. 17002B It. No. 17.6 P./ 130]

Providing 20mm. Thick double coat mala cement plaster on exterior Block/concrete walls for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1-cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1-cement : 2- coarse sand) finished with trovel including scaffolding curring etc. complete [S.O.R. Sr. No. 17017 It. No. P./ 132]

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.Internal/External both Putty and Primer [S.O.R. Sr. No. 19032 It. No. P./139]

Wall painting (Two Coats) with plastic emulsion paint of approved brand and manufacture on undercorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth etc complete. [S.O.R. Sr. No. 18031 It. No. 18.57 P./136]

Finishing wall with approved brand (ACE PAINT) of Weather Shield paint on wall surfaces (Two coats) to give even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials etc complete. [S.O.R. Sr. No. 18027 It. No. 18.51 P./136]

Applying TEXTURE PAINT two coats of primer of approved brand and manufacture on new wall surface to give an even TEXTURE including thoroughly PREPARING the surface AND free from mortar dropping and other foreign matter .

Providing and Fixing Granite 20MM THK of approved quality and colour.at Frames of DOORS AND WINDOWS/VENTS (all upto 240 mm width)with Moulding as per details provided by Architect etc. complete.

Providing and fixing anodized aluminum Frame SLIDING Door/ Window/Vent ( JINDAL MAKE 2MM THK. MIN.)with 2 Track Sliding Windows ,Top Hung Windows,Openable Windows with Mosquito Net,grill and Necessary Fitings & Fixtures as per directed complete. as per directed by Architect complete.

Providing and applying a layer of brushable bitumen coat over Toilet R.C.C. Sunk Slab & walls upto 0.60 mtr height before starting of Plumbing work etc. complete as directed by Engineer in charge

Providing and laying polished kota stone slab average 25mm thick in flooring, risers & tread of steps laid on 10mm thick cement mortar 1:3 (1-cement : 3-coarse sand) and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. [S.O.R. Sr. No. 14013A It. No. 14.44 P./111]

Providing and Fixing Kota Stone Strips (average 25mm thick) 100mm wide including joint filling, cleaning the surface etc. complete.

Providing and laying polished Granite stone, slab average 20mm thick in flooring, risers & tread of steps laid on 10mm thick cement mortar 1:3 (1-cement : 3-coarse sand) and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. [S.O.R. Sr. No. 14013A It. No. 14.44 P./111]

Providing and Fixing Granite Stone Strips (average 25mm thick) 100mm wide including joint filling, cleaning the surface etc. complete.

Providing and fixing M.S. Iron Fabricated Grills in Windows & Vents as per drawing & detail given, Weight 16.14 Kg/Sq.Mtr. with One Coat of Red Oxide and Paint complete.

Providing and Fixing Granite 20MM THK of approved quality and colour.at Toilet Basin with Moulding as per details provided by Architect etc. complete.

Constructing a cooking platform 60 cm. width and 70 cm high resting on Masonry walls, with Fixing Kota stone Avg. 25mm thick Base, Granite Stone Top, Side Vertical & Fecia Patti with Moulding etc complete with granite on exposed faces of walls as per details given by an Architects.. [S.O.R. Sr. No. 17017 It. No. P./ 121]

P & L 600 x 600mm Full Body Matt anti Skid vitrified 8/9 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit BATHROOM FLOOR [S.O.R. Sr. No. 14021A It. No. 0 P./113]

P & L vitrified 8 mm thick skirting 100mm height on walls including jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete.

Providing and Laying 400 x 400mm PARKING tiles in flooring of FLOOR including joint filling, cleaning the surface etc. complete.

Providing and Laying SKIRTING OF PARKING tiles 100mm height in FLOOR including joint filling, cleaning the surface etc. complete.

Providing and laying polished kota stone slab average 25mm thick in flooringof kitchen, store, mid landing of staircase, risers & tread of steps and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. [S.O.R. Sr. No. 14013A It. No. 14.44 P./111]

P & L 600 x 600 mm thick tiles on walls of on new surface including jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete. TOILET. utility,HandWash KITCHEN WALL

P & L 600 x 600mm Full Body Matt anti Skid vitrified 8/9 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit BATHROOM FLOOR [S.O.R. Sr. No. 14021A It. No. 0 P./113]

Providing and Laying 300 x 300mm white ceramic tiles in flooring of Terrace including joint filling, cleaning the surface etc. complete. [S.O.R. Sr. No. 14008BA It. No. 14.29 P./110]

Providing and Laying white ceramic tiles skirting 100mm height in Terrace including joint filling, cleaning the surface etc. complete.

Excavation for Laying pipe, Supplying & Laying 160mm dia. PVC PIPE 10kg/sq.cm, Back Filling etc. complete.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. [S.O.R. Sr. No. 23062 P./159]

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. [S.O.R. Sr. No. 23063 P./160]

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. [S.O.R. Sr. No. 23064 P./160]

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. [S.O.R. Sr. No. 23065 P./160]

Providing laying and jointing in true line and level 25mm dia. C.P.V.C. Pipe ( SCH- 40) for hot water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. [S.O.R. Sr. No. 23057 P./158]

Providing and fixing to wall, ceiling and floor 10.0kg. F/Cm2 working pressure polythene pipes of the following outside dia. Low density, complete with special flange compression type fittings, wall clips etc. Complete 75mm. [S.O.R. Sr. No. 23004F It. No. 23.8 P./154]

Providing and fixing to wall, ceiling and floor 10.0kg. F/Cm2 working pressure polythene pipes of the following outside dia. Low density, complete with special flange compression type fittings, wall clips etc. Complete. 110mm. [S.O.R. Sr. No. 23004G It. No. 23.8 P./154]

Providing and fixing in position 75mm dia cowel vent to pipes. [S.O.R. Sr. No. 23006B P./154]

Providing and fixing in position 110mm dia cowel vent to pipes. [S.O.R. Sr. No. 23006C P./154]

Providing,Supplying And Fixing PVC Floor Traps with Jali 150 x150 mm S.S. Material etc complete.

Item Description

Providing,Supplying And Fixing Bottle Trap for Basin complete.

Providing,Supplying And Fixing Angular Stop Cock with Wall Flange KUP-35053PM

Providing,Supplying And Fixing PVC 2' Long Connector etc complete.

Providing,Supplying And Fixing JAQUAR Long Body Bib Cock with Wall Flange CON-107KN

Providing,Supplying And Fixing JAQUAR Sink Cock with Swinging Spout (Wall Mounted Model) CON-347KNM

Providing,Supplying And Fixing JAQUAR Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083, ALD-089 & ALD-081) SOL-6083K

Providing & Supplying NIRALI Kitchen Sink Bowl Size 600x460x230 mm Glossy

Providing erecting and fixing Three Layered Syntex PVC. (ISI) water tank of with all necessary fittings and connection etc. complete on terrace.

Providing,Supplying And Fixing JAQUAR Wall Hung WC with UF soft close slim seat cover, Hinges, Accessories Set, Size:360x500x380 mm LYS-WHT-38951UFSM

Providing,Supplying And Fixing JAQUAR Metropole Flush Valve Dual Flow 40mm Size Complete Set with Exposed Shut Off Provision (2.0/4.0 Lts. Per Flushing) FLV-1089NG

Providing,Supplying And Fixing JAQUAR Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) ALD-577

Providing,Supplying And Fixing JAQUAR Thin Rim Table Top Basin, Shape - Rectangular, Size: 525x415x140 mm JDS-WHM-25907N

Providing,Supplying And Fixing JAQUAR Pillar Cock with 190mm Extension Body KUP-35021PM

Providing,Supplying And Fixing JAQUAR Waste coupling 32mm Size Full Thread with 80mm height ALD-705

Providing,Supplying And Fixing JAQUAR Concealed Body for 3-Inlet Single Lever Diverter with Button Assembly, Cartridge Sleeve But without Exposed Parts ALD-193

Providing,Supplying And Fixing JAQUAR Single Lever 3-inlet Divertor Exposed parts kit Consisting of Operating Lever, Wall Flange & Button Only (Suitable For Item ALD-193) KUP-35193KPM

Providing,Supplying And Fixing JAQUAR Bathtub Spout with Wall Flange SPJ- 85429

Providing,Supplying And Fixing JAQUAR Shower Arm Casted 190mm Long Flat Shape for Wall Mounted Showers with Flange SHA-483

Providing,Supplying And Fixing JAQUAR Overhead Shower ø120mm Round Shape Multi Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System OHS-1799

Providing,Supplying And Fixing JAQUAR Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083, ALD-089 & ALD-081) SOL-6083K

Providing and fixing to wall, ceiling and floor 10.0kg. F/Cm2 working pressure polythene pipes of the following outside dia. Low density, complete with special flange compression type fittings, wall clips etc. Complete. 110mm. Rain Water Outlet Pipe [S.O.R. Sr. No. 23004G It. No. 23.8 P./154]

Providing,Supplying And Fixing JAQUAR Pressmatic Bib Cock with Wall Flange PRS-CHR-043

Excavation for chamber, Constructing masonry chamber for underground C.I. Inspection chamber with frame & cover, foundation concrete 1:3:6, inside plaster 15 mm thk with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete, back filling etc. complete. inside dimensions 455mm X 610mm

Excavation for chamber, Constructing masonry chamber for underground C.I. Inspection chamber with frame & cover, foundation concrete 1:3:6, inside plaster 15 mm thk with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete, back filling etc. complete. inside dimensions 455mm X 610mm

One light point controlled by MCB directly. Cost of MCB shall be a part of the distribution board cost,Havells, HI-FI -Elleys / GoldMedal

One fan outlet point controlled by one 6 A switch and step type electronic regulator. Elleys / GoldMedal BRAND

6 A x 230 Volt 5 pin socket outlet point controlled by 6 A switch with switch and socket at different locations including box plate etc complete to be done with 2.5 sq mm ckt from D.B. Elleys / GoldMedal BRAND

6/16A x 230 Volt 5/3 pin socket outlet point with 16 A indicator switch with box and plate complete to be done with 4.0 sq mm wire ckt from D.B. complete. Elleys / GoldMedal BRAND

MAINS : - for three phase sockets / D.B. to D.B. / Meters to MCBs 2 x 1.5 sq mm + 1 x 2.5 sq mm FRLS copper flexible wires in and including 25 mm dia rigid PVC conduit of LHSFT grade with wall thickness of 2.0 mm KEI /R R / FINOLEX WIRE

2 x 2.5 sq mm + 1 x 2.5 sq mm FRLS copper flexible wires in and including 25 mm dia rigid PVC conduit of LHSFT grade with wall thickness of 2.0 mm KEI /R R / FINOLEX WIRE

2 x 4 sq mm + 1 x 2.5 sq mm FRLS copper flexible wires in and including 25 mm dia rigid PVC conduit of LHSFT grade with wall thickness of 2.0 mm KEI / R R / FINOLEX WIRE

LIGHT FIXTURES and FANS Supply, Installation, testing & commissioning of standard light fittings and lighting accessories including lamp.The scope shall include, providing of all hardware such as nuts,anchor fastners, bolts, screws, cleats, clamps, PVC insulated wires / cables from Junction box to lighting fixtures, ball and socket 'arrangement with J.B., suspension conduit pipe for drop for flourescent fitting The cost for supports (wire ropes etc) shall be included in the cost. Contractor shall use Aluminium blanking foils for fixtures where by spilage of lights sh all be visible through AC duct. All fixtures shall be with electronic ballasts of less than 10 Persentage THD content of intellux / Atco / Vossloh make. Fixtures shall be HAVELLS/ SURYA/ STERLITE/ CROMPTONmake only Supply, Installation, Testing and Commissioning of 1200 mm dia ceiling fan Crompton high speed with double ball bearinig, pipe of 2' height & 5 star rating / bldc motor. or approved equivalent

Supply, Installation, Testing and Commissioning Surface mounted 22W (T5) LED Tube light fixture without Reflector. PHILIPS make or equivalent.

Supply, Installation, Testing and Commissioning Water Proof Surface Light 18W Fixture. As directed by an architect.

Supply, Installation, Testing and Commissioning of 300 mm dia Exhaust Fan of METAL body with louvers STANDARD/HAVELLS MAKE

PGVCL 3 PHASE Light Meter Connection Charges

Supply, Installation, Testing and Commissioning Surface mounted 9W LED Bulb with holders. PHILIPS make or equivalent.

Providing earthing stations for equipment earthing with making earth pits, alternate layers of salt and charcoal, earth chamber, Cilid cover, GI water pipe with funnel, Earth Plate, Wire / strips, Equipotential bar etc complete.

Supply, Installation, Testing and Commissioning of DB BOX in line and level complete( G2,L&T make or equivalent.

Providing and fixing M.S. Iron FabricatedMONKEY LADDER and overhead watertank stands as per drawing & detail given, Weight 16.14 Kg/Sq.Mtr. with One Coat of Red Oxide and Paint complete.

Providing and fixing M.S. Iron Fabricated overhead watertank stands as per drawing & detail given, Weight 16.14 Kg/Sq.Mtr. with One Coat of Red Oxide and Paint complete.

Providing and fixing terracotta jali 200 x 200 mm with chemical in line and level and directed by architect complete complete.

Mirror on Basins with fitting complete.

Providing and Installing Door Bell with acessories and connections complete,as per Directed by Architect.GM/G2 /hi-fi/Havells or equvivalent make as Directed by Architect.

Providing and Installing Gyser with acessories and connections complete,as per Directed by Architect.Racold/AO Smith/Jaquar/Havells or equvivalent make as Directed by Architect.

Item Description

PAVER BLOCK ROAD WORKS Excavation for Foundation Trenching up to 1.80 m depth including sorting out and stacking of useful material and disposing off the excavated stuff up to 50 m lead. [S.O.R. Sr. No. 04002C It. No. 0 P./42]

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers of 20cm. In depth consolidating each deposited layer by ramming and watering.

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 aggregate) and curring complete.

Precast Concrete Block Masonry (Including quoin blocks closer etc.) with solid concrete blocks of approved size made of cement concrete 1:3:6 mix (1-cement : 3-coarse sand : 6-graded stone aggregats of 20 mm and down grade0 in foundation and plinth cement mortar 1:6

Providing and fixing NEW pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete M250 pnumatic compressed by mechanically pressed and as per approved design including 75mm Stone dust layer for levelling and filling the joint with sand in proper line and level etc complete.

Providing , Fixing and Installing Solar Street Light Poles Ht. 8Mtr. with 200W solar street Light as per Drawing and Directed By Architect Complete.

DRAINAGE AND WATERLINE WORKS Excavation for Foundation Trenching up to 1.80 m depth including sorting out and stacking of useful material and disposing off the excavated stuff up to 50 m lead. [S.O.R. Sr. No. 04002C It. No. 0 P./42]

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers of 20cm. In depth consolidating each deposited layer by ramming and watering.

Excavation for chamber, Constructing masonry chamber for underground C.I. Inspection chamber with frame & cover, foundation concrete 1:3:6, inside plaster 15 mm thk with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete, back filling etc. complete. inside dimensions 455mm X 610mm

Providing, laying and fixing to floor SN-8 pipe stiffness class DWC HDPE PIPE OF 300MM DIA (INNER) WITH FITTINGS FOR DWC HDPE PIPE AND JOINING OF DWC HDPE PIPE BY ELASTOMERIC RUBBER AND COUPLERS LAYING OF DWC HDPE PIPE COMPLETE BY MAINTAINING PROPER SLOPE etc. Complete 75mm.(D-Rex)ASTRAL/SUPREME/PRINCE/FINOLEX

Providing and fixing to floor 10.0kg. F/Cm2 working pressure polythene pipes of the following outside dia. Low density, complete with special flange compression type fittings, wall clips,CLIPS etc. Complete 75mm.ASTRAL/SUPREME/PRINCE/FINOLEX [S.O.R. Sr. No. 23004F It. No. 23.8 P./154]

Providing and fixing to floor 10.0kg. F/Cm2 working pressure polythene pipes of the following outside dia. Low density, complete with special flange compression type fittings, wall clips,CLIPS etc. Complete. 110mm.ASTRAL/SUPREME/PRINCE/FINOLEX [S.O.R. Sr. No. 23004G It. No. 23.8 P./154]

Item Description

R.C.C ROAD WORKS Surface cleaning of Road with Hacking & Removing all loose materials with all lead and lift & making Road surface Dust Free by Air Pressure complete.

Earthwork for embankment including breaking clods,dressing with all lead and lift and including watering,rolling and consolidation of subgrade in layers at O.M.C.to required dry density including filling the depression which occur during the process using power roller 8T to10T.(E) From Borrow area within 3.0KM. lead (i) Hard murrum.

Suppliying of graded stone aggregate of following sizes(for W.B.M. Road)(2) Hand broken stone aggregate 40mm to 63 mm size.0.23 thk Soling including compacting complete

Rolling and consolidation of soling including filling in depression which occur during the process, with power roler 8 tonne to 12 tonne.

Providing and laying Avg. Ht. 162 mm controlled cement concrete 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded stone aggregate 25 mm nominal size ) for C.C. Road including compaction and finishing by TRIMIX process, including providing contraction and expansion joint and filling in joints with bitumen, & bruming the surface etc. complete as directed by Engineer in charge.

Providing formwork of ordinary timber planking so as to give rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work.

Providing TMT bar FE 500D reinforcement for R.C.C. work including cutting, bending, binding and placing in position complete.

PAVER BLOCK WORKS Excavation for Foundation Trenching up to 1.80 m depth including sorting out and stacking of useful material and disposing off the excavated stuff up to 50 m lead. [S.O.R. Sr. No. 04002C It. No. 0 P./42]

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers of 20cm. In depth consolidating each deposited layer by ramming and watering.

Providing formwork of ordinary timber planking so as to give rough finish including centering shuttering and propping etc. and removal of the same for in situ reinforced concrete and plain concrete work.

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 aggregate) and curring complete.

Precast Concrete Block Masonry (Including quoin blocks closer etc.) with solid concrete blocks of approved size made of cement concrete 1:3:6 mix (1-cement : 3-coarse sand : 6-graded stone aggregats of 20 mm and down grade0 in foundation and plinth cement mortar 1:6

Providing and fixing NEW pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete M250 pnumatic compressed by mechanically pressed and as per approved design including 75mm Stone dust layer for levelling and filling the joint with sand in proper line and level etc complete.