Modernization of the APTRANSCO TLC Stores at Vijayawada based on Master Plan & Architectural Design: Construction of PEB Blocks 1 & 2, Common Toilets, Watch Tower and Security Cabin etc., including Facade works, Electrification, Plumbing, CC Roads and Platforms (2nd Call)

Earthwork excavation in all types of soils (up to stone matrix)which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry, wet and slushy etc. covering initial lead and lift etc and backfilling the foundations (after laying foundations) with excavated earth complete as per the the directions of the Engineer in charge for the finished item of work.

Levelling by filling with borrowed gravel by mechanical means including cost & conveyance of gravel, depositing the soils in filling areas, spreading soils, breaking clods, sectioning and consolidation with three wheel 8 to 10 MT static Road Roller @ OMC to meet requirement as per standard specification , including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per (Payment will be made based on level for finished item of work).

Providing Sand cushion for foundations and basement in layers, not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost & conveyance of all materials, operational, incidental, labour charges, hire charges of T&P at all leads, lifts etc. complete as per the directions of the Engineer in charge for the finished item of work

Laying of Cement Concrete (1:4:8) mix using 40mm size HBG Machine crushed metal for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Brick Masonry in CM (1:6) with Fly ash cement/ lime solid blocks with compressive strength not less than 50kg/sqcm confirming to IS: 12894-1990 class 5 of size 290 X 225 X 140 mm of approved quality, including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work . For masonry work below 1.2m height

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe-500/Fe-500D/FE-550 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (A) FOR FOOTINGS

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (B) FOR PEDESTALS/PILE CAPS

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (C) FOR PLINTH BEAMS

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum) (D) FOR COLUMNS with Steel scaffolding GROUND FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg, sand 0.40 cum and metal 0.80 cum) (E) For columns with Steel scaffolding FIRST FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg, sand 0.40 cum and metal 0.80 cum) (F) For Roof beams with steel centering First Floor

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg, sand 0.40 cum and metal 0.80 cum) (G) LINTELS with steel scaffolding GROUND FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg, sand 0.40 cum and metal 0.80 cum) (H) For Lintels with steel scaffolding FiRST FLOOR

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg, sand 0.40 cum and metal 0.80 cum) (I) SLABS (upto 150mm thick) with steel centering Ground Floor

Supply & Installation of the Pre-Engineered Building (PEB) Structure rigid frames, secondary framing & roofing elements manuf. off-site and assembled on-site. The adhere to industry standards with rigorous quality control measures & inspection procedures throughout the construction process.Light Frame strucure.

Supply & fixing Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating Alu-Zinc coating AZ 150 GSM, Tensile Strength 550 MPA, Paint coating Regular Modified Polyester painting, Painting thickness (Top) 18 to 20 Microns, (Bottom) 5 to 7 Microns, Sheet Width 1.020, Length Maximum 12 Meters with Regular Range Colours, including cost and conveyanc of all materials, labour charges for fixing with J-Bolts (8mm dia), Washers etc., complete for finished item of work as directed by Engineer - in - charge.

Supplying, and installing insulated roofing sheets consisting of polyurethane foam or similar insulating materials, sandwiched between two layers of metal sheets. The insulation thickness shall be 50mm, ensuring efficient thermal and acoustic insulation. The installation process will follow the provided design, ensuring proper fixing of vertical side coverings with secure jointing and sealing to avoid leakage.

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work.

Brick Masonry in CM (1:6) with Fly ash cement/ lime solid blocks with compressive strength not less than 50kg/sqcm confirming to IS: 12894-1990 class 5 of size 225 X 100 X 60 mm of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work .

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt - 2 Nos., 6” D handles - 2 Nos., 10” Aldrop - 1 No., Butt Hinges - 6 Nos, Mortise Lock of approved quality - 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work. for Double leaf Door

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent for Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Facade structural glazing with st176 saint gobain 12mm with 135mm x 65mm section aluminium powder coated, complete work including installation as per the shade selected by authority.

Aluminium composite pales, cladding with 25mm x 25mm aluminium sections fixed into PEB strucrure and silicon joint of standard quality.

Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing etc complete as per the directions of the Engineer in charge for the finished item of work. For Ground Floor

Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing etc complete as per the directions of the Engineer in charge for the finished item of work. For First Floor

Laying of Cement Concrete (1:4:8) mix using 50% of 40mm size and 50% of 20mm HBG machine crushed metal for bed flooring including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Plain Cement concrete - Nominal Mix (1:2:4) with 12 to 20mm HBG metal including cost and conveyance of all materials, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456).

Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For Ground Floor

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For First Floor

Providing skirting to internal walls to 15 cm height/risers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For Ground Floor

Providing skirting to internal walls to 15 cm height/risers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. For First Floor

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for Ground Floor

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for First Floor

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. FOR GROUND FLOOR

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. FOR FIRST FLOOR

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. FOR GROUND FLOOR

Providing stainless steel hand railing with 304 Grade stainless steel sections using 48.26mm OD pipes/ squares as styles/ verticals at required intervels, 48.26mm OD pipes/ squares as hand railing/ top sloped member and 3 Nos 17.145mm OD pipes/ squares as intermediate members or any other hand railing design specified by the Engineer in Charge including fabrication of stainless steel railing works using stainless steel welding rods, buffing, polishing, lacquer finishing for seamless finish including fixing the verticals by drilling the holes in the concrete/ granite/ tiled floor, grouted with suitable Resin anchor grout such as Lockfix-S of Fosroc or any equivalent chemical including cost of all materials and labour charges for finished item of work as approved and directed by the Engineer-In - Charge.

Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls, Cable duct ) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Labour charges for power troweling the concrete surface including machine hire charges, labour charges etc all complete for finished item of work.

Supply and fixing of 25 mm outer dia (1.60-1.80) mm thick mediium grade with IS: 9537 part 3 regid PVC pipe (ISI mark) ( Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin makes) concealed in walls for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.

Supply and Run 2 of 2.5Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Makes (Category-I) : Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab / Gloster/ Goldmedal/ GM/ Fortune Arrt/Anchor/ Million/ APAR (Anushakthi) /Sudhakar /Orbit/ Batra Henlay/ Salzer in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run 1 of 2.5Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Makes (Category-I) : Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab / Gloster/ Goldmedal/ GM/ Fortune Arrt/Anchor/ Million/ APAR (Anushakthi) /Sudhakar /Orbit/ Batra Henlay/ Salzer in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run of 2 of 4.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Makes (Category-I) : Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab / Gloster/ Goldmedal/ GM/ Fortune Arrt/Anchor/ Million/ APAR (Anushakthi) /Sudhakar /Orbit/ Batra Henlay/ Salzer) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for Mains from Distribution board to Lighting point Board.

Supply and Run of 1 of 4.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR (Anushakthi) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building

Wiring with 2 runs of 1.5 Sqmm ISI marked FRSLS/ FRLS-H/ HFFR/ ZHFR PVC insulated flexible copper cables 1100V grade as per IS:694/ 1990 & IS: 17048/ 2018 specifiation for copper cable of Makes ( Category-I) : Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR(Anushakthi) in existing conduit pipe of 20/25mm dia 1.5mm thick, with 6A/10A 1 way 1 Module Modular switch of Makes (Category-I) : Legrand (Myrius/Lyncus) / Schneider (Clipsal X / Livia AB)/ Crabtree (Murano/ Athena)/ Lauritz Knudsen-entice / enCurve (formerly L&T)) / GM-(Four-Five) / Goldmedal (GIFA) / North-West(Artisa) / Million (M-VEE) / Anchor Roma (PLUS) / Precision (Series 7) /Honeywell (Blenze pro)/ Indoasian(Shynora) / Salzer (diamond series), and 3 plate Ceiling Rose of makes: GM G Home/ Gold Medal Olive/ Million Zoom/ Greatwhite Omega/ Koncept/ Vimalopel/ Anchor/ Vihan/ CPL/ Havells Reo/ Elleys with modular cover frame covering to hot dipped galvanized 20/18SWG module switch board including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and Run 1 of 1.50Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible copper cable Makes (Category-I) : Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab / Gloster/ Goldmedal/ GM/ Fortune Arrt/Anchor/ Million/ APAR (Anushakthi) /Sudhakar /Orbit/ Batra Henlay/ Salzer in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing of 6A/10A 3 pin 2 Module Modular socket with shutter & 6A/10A 1 way 1 Module Modular switch control of Makes (Category-I) : Legrand (Myrius/Lyncus) / Schneider (Clipsal X / Livia AB)/ Crabtree (Murano/ Athena)/ Lauritz Knudsen-entice / enCurve (formerly L&T)) / GM-(Four-Five) / Goldmedal (GIFA) / North-West(Artisa) / Million (M-VEE) / Anchor Roma (PLUS) / Precision (Series 7) /Honeywell (Blenze pro)/ Indoasian(Shynora) / Salzer (diamond series) on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of 16A/6A 1 way combi socket modular switch with shutter ( Legrand (Allzy) / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura) / Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vima make) with 16A/20A 1 way 1 Module Modular switch control on a separate metallic box of size 200x150x60mm made of 18SWG sheet steel box coated with two coats of zinchromate redoxide with 1 or 2 module cover frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of 20W, not less than 1100mm length LED batten light and all standard accessories of makes Wipro / G.E. / Phillips / Crompton / Bajaj/ Havells/ HPL/ Halonix on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of 12" (300 mm) ISI, 900 RPM heavy duty exhaust fan with metallic blades with mark ( Crompton / Almounard / Havells Ventil Air-DB makes) including cost and conveyance of all fixtures, fittings, labour for fixing in wall inclding making holein wall with necessary connections at all positions of building complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing of 4 Way SPN DB with IP 30 Protection as per IS:13032 and suitable for 4Nos S.P out goings and for 1 No Incommer etc complete of Makes (Category-I) : Legrand(Ekinox 3) / Schneider-A9 / Hager -Novello+/ Seimens/ Havells STADx / Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)/ABB-ITUS with IP-30 protection suitable for single Phase supply of 40A, DP Isolator of makes as incomer and 10KA-6-32A range SP_ MCBs of Makes (Category-I) : Legrand-DX3 / Schneider-A9/ Hager-h3 / Siemens-5SX4/ Havells STADx/ Lauritz Knudsen (formerly L&T) -AU/ Indo Asian-Opti pro/HPL(Techno)/ Anchor (Uno Plus)/ABB-SDB200 as out-going including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for surface/ flush mounting.

Providing independent earthing by excavating a trench to a depth of 2.1m in all soils, as per size specified in the data, using 40mm dia 'B' class GI pipe of 2.5m length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and run of 8 SWG copper wire including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and Run 4 of 6.0Sqmm FRLS/ FRLS-H / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable of Makes (Category-I) : Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab / Gloster/ Goldmedal/ GM/ Fortune Arrt/Anchor/ Million/ APAR (Anushakthi) /Sudhakar /Orbit/ Batra Henlay/ Salzer in the existing pipe for run of Mains from AC panel to 32Amps Main switch as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply of the following PVC XLPE armoured cable 1100 V. Grade with ISI mark stranded / solid, aluminimum conductor complete Make: RPG/ POLY CAB/ Finolex / Havells / paragon / Unicab / V- Guard / fortune Art EBXL. (A) 3.5 Core 120 Sqmm

Supply of the following PVC XLPE armoured cable 1100 V. Grade with ISI mark stranded / solid, aluminimum conductor complete Make: RPG/ POLY CAB/ Finolex / Havells / paragon / Unicab / V- Guard / fortune Art EBXL. (B) 3.5 Core 95 Sqmm

Supply of the following PVC XLPE armoured cable 1100 V. Grade with ISI mark stranded / solid, aluminimum conductor complete Make: RPG/ POLY CAB/ Finolex / Havells / paragon / Unicab / V- Guard / fortune Art EBXL. (C) 3.5 Core 35 Sqmm

Supply of the following PVC XLPE armoured cable 1100 V. Grade with ISI mark stranded / solid, aluminimum conductor complete Make: RPG/ POLY CAB/ Finolex / Havells / paragon / Unicab / V- Guard / fortune Art EBXL. (D) 4 Core 16 Sqmm

Supply, transportation & installation of 600mm x 75mm x 2.0mm size of Hot Dipped Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and etc., complete as per the site conditions.

Supply, transportation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete. as required as per the site conditions. 300X50mm Cable Tray

Supply, transportation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete. as required as per the site conditions. 450X50mm Cable Tray

Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes : As per list of recommended brands as category I. 1. Quantity : 1 2. Rated KVA: ........KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting: Plinth. 5. Wound: Copper Double wound 6. Type: Core type oil immersed 7. Cooling: ONAN 8. Temp Rise: 40⁰C in oil, 45⁰C by resistance 9. Vector Group: Dyn 11 10. Primary Connection: Delta 11. Nominal Voltage / Current: _ 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases: 3 15. Primary wires: 3 16. Secondary connection: Star 17. Secondary Volts / Current : 433V 18. Secondary phases: 3 19. Secondary wires: 4 20. Taps on primary winding for primary voltage variation: +5% to - 10% in steps of 2.5% of 7 position (6 Steps) 21. Terminal arrangement. a. HV: HT terminal box as per the site condition. b. LV: Cable box suitable to receive ---------- --Sq.mm XLPE cable 22. LV: One separate terminal for earthing. 23. Total Losses at 50% Loading [Watts] [Max] --- as per IS 24. Total Losses at 100% Loading [Watts] [Max]--- as per IS 25.Percentage Impedance at 75 deg. C at -----as per IS 26. No Load current: Less than 2% of full load current. 27. Standard Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs: Two c. Off-circuit tap switch: One. d. Earthing Terminals : Two e. Radiators (Attachable): Adequate f. Explosion vent with Diaphragm : One g. Conservator with Drain plug: one h. Oil filling hole with cap :One i. Oil level indicator: One j. Dehydrating Silica gel Breather: One k. Terminal Arrangement: HV With Terminal Box l. Terminal Arrangement: LV Cable Box m. Separate Neutral Bushing : One n. Drain cum filter valve with blanking plate: One o. Air release device: One p. Thermometer Pocket: One q. Four: Unidirectional flat rollers r. One :10Cm dial thermometer (Rigid stem type)

MAIN CONTROL PANEL-Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted indoor LT panel made out of No.16/14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN Aluminum bus bar ( with rating of 0.8A/ Sqmm)supported with DMC /SMC barriers and color coaded with heat shrinkable sleeves, flexibility to accept the up four out going cables and necessary cable chamber . The panel shall have comprised of following switch gear . Including supply and fixing the same and painting with powder coating including internal connections cost and conveyance of all materials & labour charges.

Supply and fixing of 4 Way TPN DB with IP 43 Protection as per IS:13032 and suitable for 4Nos S.P out goings and for 1 No Incommer etc complete of makes Siemens/ ABB/ Standard / Havells/ HPL/ Hager/ Indo Asian / C&S / L&T/ GM / Gold Medal make) with IP-20 protection suitable for single Phase ELCB/ RCCB/ DP Isolator (ABB- S200/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T-Exora/ GM / Gold Medal/ Anchor/ Salzer) as incomer and 10KA SP MCBs (ABB- S200/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T-Exora/ GM / Gold Medal/ Anchor/ Salzer make) as out-going including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for surface/ flush mounting.

Providing and fixing in position at all levels of the building and against walls UPVC pipes (SCH 40) as per ASTM D-1785 of Astral / Prince / Supreme / ashirvad or any ISI brand make for water supply line to earth pits / toilets including cost and conveyance of pipe, specials such as elbows, Tees concealing same in walls and floors by cutting 32/ 25/ 20/ 15mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work (A) 32 mm dia Nominal Bore

Providing and fixing in position at all levels of the building and against walls UPVC pipes (SCH 40) as per ASTM D-1785 of Astral / Prince / Supreme / ashirvad or any ISI brand make for water supply line to earth pits / toilets including cost and conveyance of pipe, specials such as elbows, Tees concealing same in walls and floors by cutting 32/ 25/ 20/ 15mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work (B) 25 mm dia Nominal Bore

Providing and fixing in position at all levels of the building and against walls UPVC pipes (SCH 40) as per ASTM D-1785 of Astral / Prince / Supreme / ashirvad or any ISI brand make for water supply line to earth pits / toilets including cost and conveyance of pipe, specials such as elbows, Tees concealing same in walls and floors by cutting 32/ 25/ 20/ 15mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work (C) 20 mm dia Nominal Bore

Supplying and fixing long body C.P. Taps including cost and conveyance, labour charges complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing 101.6 mm dia PVC Nahani Trap/Floor trap of standard make including making connection to PVC pipes/waste water lines with cement concrete base for embedding traps in position, finishing up to floor level with water proof cement plaster with grating at top complete as per the directions of the Engineer in charge for the finished item of work.

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of standard make, Chrome Finish with 7 years warranty including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing white glazed URINAL PARTITION (Division Plate) of Hindware /HSW/ Parryware/ Neycer make of size 690mm long and 325mm wide including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing white glazed flat back Bowl urinal basin (Indian type) of size 440x 265x 315mm of HSW/ Parry/ Neycer make including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parry ware make with WHITE colour glazed with 'S' trap, Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 8 Litres capacity single Flush and external fixtures complete as per the approved colour and directions of the Engineer in charge for the finished item of work.

Supplying & Fixing 550x400 mm- single C.P. Pillar cock Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 300 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing Pedestal for wash hand basin (HSW/ Parry/ Earthenware ) make including cost of all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with of 1000 liters Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks etc complete as per the directions of the Engineer in charge for the finished item of work.

Supplying & fixing Ashirvad/Astral flow guard for equivalent PVC Pipes with fittings in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges complete for finished item of work. (A) 110MM PIPE

Supplying & fixing Ashirvad/Astral flow guard for equivalent PVC Pipes with fittings in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges complete for finished item of work. (B) 75MM PIPE

Earthwork excavation in all types of soils (up to stone matrix)which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry, wet and slushy etc. covering initial lead and lift etc and backfilling the foundations (after laying foundations) with excavated earth complete as per the the directions of the Engineer in charge for the finished item of work.

Levelling by filling with borrowed gravel by mechanical means including cost & conveyance of gravel, depositing the soils in filling areas, spreading soils, breaking clods, sectioning and consolidation with three wheel 8 to 10 MT static Road Roller @ OMC to meet requirement as per standard specification , including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per (Payment will be made based on level for finished item of work).

Earthwork excavation for road way in soil by mechanical means including cutting and loading in tippers trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment location or disposal of unserviceable soil with all leads and lifts etc., complete for finished item of work for trench cutting as per MORT&H specification No.301 as directed by the Engineer-in-Charge.

Providing sub base/ base/ surface course with Gravel, spreading in uniform layers with motor grader , rolling with smooth wheel roller (80-100 kN static roller) in stages to proper grade and camber, watering and compacting to the required density as per clause 401.4 as per technical specification clause 408 MORD (Measurements to be taken for compact thickness of layer)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Plain Cement concrete pavement with Nominal Mix (1:2:4) with 12 to 20mm (50% each) HBG metal using concrete mixer laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work) including cost and conveyance of all materials, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456). FOR ROAD PAVEMENT WORK

Construction sawn joint groove (using diamond studded blades) 3 to 5mm wide and dowel bars complying with clause 602.6.5 of specifications for road and bridge works (third revision) published at New Delhi in 1955 by IRC on behalf of Government of India, Ministry of surface transport and as directed in the drawings. the construction joints shall be out as soon as the contract as undergone intial hardening and as hard enough top take take the load of joints sawing machine without causing damage to the slab. the joint ceiling compound shall be of hot poured bitumen type having flexibility resistance to age hardening and due ability of the sealent shall be in accordance with BS5212 (part-2) with all lead and lift including cost and conveyance of all materials etc.,

Earthwork excavation in all types of soils (up to stone matrix)which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry, wet and slushy etc. covering initial lead and lift etc and backfilling the foundations (after laying foundations) with excavated earth complete as per the the directions of the Engineer in charge for the finished item of work.

Providing Sand cushion for foundations and basement in layers, not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost & conveyance of all materials, operational, incidental, labour charges, hire charges of T&P at all leads, lifts etc. complete as per the directions of the Engineer in charge for the finished item of work

Laying of Cement Concrete (1:4:8) mix using 40mm size HBG Machine crushed metal for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe-500/Fe-500D/FE-550 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and placing RCC M- 25 Design mix Concrete (using Cement not less than 380 kgs) using Mixer with 20mm & 12mm size machine crushed hard granite metal (in 2:1 ratio) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(cement 380 kg , sand 0.40 cum and metal 0.80 cum)

Plain Cement concrete - Nominal Mix (1:3:6) with 12 to 20mm (50% each) HBG metal for Drain walls with necessary form work including cost and conveyance of all materials, machine mixing, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456) (Assuming wall thickness 250mm)

Plain Cement concrete pavement with Nominal Mix (1:2:4) with 12 to 20mm (50% each) HBG metal using concrete mixer laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work) including cost and conveyance of all materials, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456). FOR ROAD PAVEMENT WORK

Labour charges for power troweling the concrete surface including machine hire charges, labour charges etc all complete for finished item of work.

Supply and fixing of C.C. Kerb not less than M30 strength of size 300x250x100 mm thick with bottom thickness of 100 mm up to height of 250 mm and top width of 75 mm thick chamfering with 45° at starts at 250 mm height to 300 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed jointing with C.M(1:3) including cost and conveyance of all materials & labour charges including transportation fromapproved source, loading & unloading charges including contractor profit & overhead charges complete for finished item of work

GST applicable on total value of above civil works