SPL REPAIR TO BLDG NO P-63(01 TO 04) OFFR MD ACCN AND ARTIFICIAL RECHARGE STRUCTURE FOR RAIN WATER SHARVESTING UNDER AT 2 GARH RIF UNDER GE (A) BHUJ

Taking down cement plaster, any description, on brick or blockor stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 over block or stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.

M&L for 15 mm thick rendering on stone block or masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.

M & L for preparation of newly plastered surface on walls and applying two coat of acrylic weather proof paint (Exterior grade) over a coat of primer complete all as specified and directed.

Taking down chowkat or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and as directed.

Taking down chowkat or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and as directed.

Taking down shutters of any description and in any position exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Virified Ceramic tiles light shade 8 to 9 mm thick (square/rectangular) polished/Matt/Glossy, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in epoxy grout and including 15 mm thick screed bed in CM 1:4, complete all as spcified and directed

All as above but on vertical surface as in skirting/Dados over 8 to 9 mm thick plaster cm 1:4. complete all as specified and as directed.

M& L for applying Cement putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as all specified and directed.

S&F in repair 150 mm long floor door stopper of a brass body and tongu with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F (concealed / open)20 mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and as directed.

S&F (concealed / open) 25mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and as directed.

Demoltion of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick Granite jet Black (of any type) work (table rubbed and polished) in cooking plateform, Jambs cill and like set in cement mortar (1:4) inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed.

S&F Single Piece WC with PP Close Seat cover Hinges Dual Flush Cistern Fitting Fixing Accessories And Accessories set size 360x640x685 mm S Trap 110mmas approved and directed. (Make : Jaquar/Kohler/ Cera)

S&F in repair vitreous china Counter/ Table top Wash hand basin (White) of size (570x420x195 mm) mm complete all as specified and as directed. (Cat No. FLS-WHT-5601) Make: Jaquar/Equivalent

S&F Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15 mm nominal bore (Cat No.ARI-CHR-39233NK) Make: Jaquar/Equivalent

S&F 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and as directed.

S&F stainless steel health faucet witrh 1 Mtr tube and hoock complete all as specified and directed. Confirming to Cat part No ALD573 of jaguar/PRAYAG complete all as specified and as directed.

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified and as directed.

M&L for complete removal of existing roof treatment incl brushing and applying neat cement slurry with 3 Kg/Sqm of cement complete all as specified and directed.

M&L for averaging 25mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding incl water proofing compund complete all as specified and directed.

M&L Rendering 10 mm thick of CM 1:4 on concrete roof surfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight. complete all as directed.

M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying APP modified membrane pre-fabricated , reinforced with non woven polyester , of 3.00 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps complete all as specifiedand directed.

M&L cleaning surface and applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and directed.

M&L for vitrified tiles Fullbody 8 mm thick, Light shade (square/rectangular) polished/Matt/Glossy, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nanital or similar pattern roof covering complete all as specified and as directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantilng wrought iron or mild steel work of any description not otherwise provided for all as specifed and directed.

M&L Steel work in tubular trusses, Pillars including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grde St-240 ,complete all as specified and as directed.

M&L for framed brackets of angles or tees with web and franges cut to shape, drilled and countersunk for screw incl bending and welding angles, as necessary gusset plate plates, reviting etc 10 kg each brackets confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed.

S&F in repair 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

M&L prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint fixed to wall complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks ccomplete all as specified and as directed.

S&F 18 mm thick prelaminated PVC Cheluka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works all as directed and as per manufacture instructions Make : Rajshree plasticwood

All as per Above item but 18 mm thick plain cheluka plywood complete all as specified and as directed.

All as per Above item but 12 mm thick plain cheluka plywood complete all as specified and as directed.

All as per Above item but 05 mm thick plain cheluka plywood complete all as specified and as directed.

M & L for preparation of old decorated surface on walls and applying two coat of acrylic weather proof paint (Exterior grade) over a coat of primer complete all as specified and directed.

M & L existing treatment on old walls and applying two coat of distemper oil emulsion complete all as specified and directed.

M & L existing treatment on old ceiling and applying two coat of distemper oil emulsion complete all as specified and directed.

S&F in repair towel rack stainless steel 600 mm long shelf with lower hangers complete all as specified and as directed and approved GE.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and directed.

S & F of Corner Glass Shelf (with Bracket) CAT NO ACN-1173 JAGUAR or equivalent incl all fittings and accessories all as spd and directed

S&F Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S & F in repair Stainless steel curtain rods 25mm dia fancy type with required supports, and open/end brackets complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Co mposite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp-ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fire retardant

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgen polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F in PVC Wire wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Partition basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Plain basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Dish(plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed.

S&F in repair Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F Brass, sliding door bolt 300 mm with sand or die-cast brass has staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F brass Handle fabricated type polished of Size 100 mm complete all as specified and as directed.

S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F in repair sinks laboratory made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F for continuous (piano) hinges, mild steel, bright finish or electrogavanised, width of flaps (when open) 40mm complete all as specified and as directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames 92 X29.6 X1.10mm , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : Making all edges i.e. cill and jamb good by cement mortar 1:3

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fiber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed.

Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

S&F30 mm wide & 1 mm thick PVC edge bending of PVC pasted on edges with suitable adhesive, complete as specified and directed.

S&F auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed.

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and as directed.

M&L for 15 mm thick plaster in cement mortar (1:4) on brick or block or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified and as directed.

M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finishcomplete all as specified and as directed..

M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specified and as directed.

S & F in repairs 900 x 800 x 260 mm plate rank of stainless steel with steel shelves make out of 0.7 mm thick steel sheet and hanging arrangement for utensil including taking down existing complete all as specified and directed

M&L Excavation in over areas nt exc 1.5mt depth and getting out any type of soil complete all as specified and directed

M&L Excavation in over areas exc 1.5mt and nexc 3.0 m depth and getting out any type of soil complete all as specified and directed

M&L Excavation in over areas exc 1.5mt and nexc 3.0 m depth and getting out SDR complete all as specified and directed

M&L Excavation in over areas exc 3.0mt and nexc 4.5m depth and getting out any type of soil complete all as specified and directed

M&L Excavation in over areas exc 3mt and nexc 4.5 m depth and getting out SDR complete all as specified and directed

M&L Excavation in over areas exc 4.5mt and nexc 6.0 m depth and getting out any type of soil complete all as specified and directed

M&L Excavation in over areas exc 4.5mt and nexc 6 m depth and getting out SDR complete all as specified and directed

Returning, filing in, incl spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil/rock complete all as specified and directed

Removal of excavated soil to a distance exc 50m & n.exc 100m & deposited at a level n.exc 1.50m above from starting point complete all as specified and directed.

M & L PCC (1:4:8)type D2(using 40 mm grade aggregate) in foundation filling and mass concrete complete all as specified and directed

M&L Walling of stone masonary squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM(1:6) complete all as specified and as directed.

M&L for loose filling broken brick Ballast of gauge 40 to 80 mm complete all as specified and as directed.

M&L for RCC Nominal Mix type B1 (1:2:4) 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span graded aggregate for Beam complete all as specified and directed.

M&L for RCC Nominal Mix type B1 (1:2:4) 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for use & waste for Form work for rough finished surfaces of concrete measured flat for Beam complete all as specified and directed.

M & L for Form work for fair finished surfaces of concrete measured flat for slab complete all as specified and as directed.

M&L for Reinforcement Steel(TMT bars)Fe 500d TMT bars 10mm dia & over of Grade Fe 500d complete all as specified and as directed.

M&L for Reinforcement Steel(TMT bars)Fe 500d 5 to 10mm dia in stirrups, spacers & binder etc; complete all as specified and as directed.

Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast Slab complete all as specified and as directed. (Reinforcement will be paid seperately)

M&L for NP2 pipe 450 mm dia complete all as specified and as directed.

Earth work in excavation in soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed.

M & L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed exc 10 cm in width and set and jointed in C M 1:6 complete all as specified and directed.

M&L PCC 1:2:4 type B2 using 12.5mm graded stone aggt as in coping complete all as spd & as directed.

M&L for rendering 10mm thick on fair face of block masonary in CM 1:4 and finishing even and smooth without using extra cement complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) for surface channel including weathering slightly rounded or chamfered including formwork complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement, including forming moulds, mitered/stopped ends etc. complete all as directed.

Removal of excavated surplus material soil/spoil to a distance exc 50 m n.exc 150 m including debries lying at site and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Dismantaling and taking down copper / aluminium point wiring any type / size complete with removing all connection and accessories such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface complete all as specified and as directed.

Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface all as directed.

Taking down old and unsrevicable sheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB's , insulator etc complete after removing all connection and making good the disturbed surface all as directed.

M&L for Point wiring complete with FR PVC insulated unsheathed , 1100 V grade conforming to IS 694 , 1.5 Sqmm (Norminal area) multistranded ,copper conductor cable drawn through in non metallic rigid PVC conceled medium grade ,minimum 20 mm dia, ISI Marked, with sutaible size of 1 to 8 module metal flush boxes and back plate for mounting of modular switches/socket and regulators and including modular fornt plate with all acessories complete all as specified and as directed.

(a) One light point controlled by one way one switch SP 5 Amps ,240 V.

(b) One light point controlled by two 2 way switch SP 5 Amps ,240 V.

(c) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V.

(d) One switch socket outlet 3 Pin, 5 Amps, SP on independent board.

(e) One switch socket outlet 3 Pin, 5 Amps, SP on same board.

(f) One bell / buzer point controlled by one push button switches on independent board .

All as per the above item No 117 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet complete all as specified and as directed.

S&F modular switch one way 6 Amps , 1 module type complete all as specified and as directed.

S&F modular switch two way 6 Amps , 1 module type complete all as specified and as directed. .

S& f modular socket , 6 Amps , 2/3 pin combined 2 module complete all as specified and as directed.

S& f modular switch socket combination, 6 Amps / 16 Amps , 2/3 pin combined 2 module complete all as specified and directed.

S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and as directed.

S&F Bell push 6 Amps 1 module complete all as specified and as directed.

S&F bell Multi music type , 240 Volt , Single Pole ISI marked complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement and 2 Nos of round or square PVC bolck for fixing of FTL fitting complete all as per directed.

Supply and fixing of mirror light of capacity 1x10 Watt epoxy white powder coated CRCA sheet steel housing with acrylic diffuser gaskat with all fixing acessories complete all as specified and directed.

Supply & fixing modular fan regulator step type , 1 module complete all as specified and as directed.

M&L for sub main wiring with Four runs of 10 Sqmm (4x10 sqmm )1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductor cable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 10 Sqmm (1x10 sqmm ) single core FR PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 10 Sqmm ,one run of 10 Sqmm ( 2x10 sqmm + 1x10 sqmm ) cable and one meter of conduit will be measured as one unit again.

S&F sheet metal enclosures for distribution board when MCB to be used TPN ( Triplepole and neutral ) 4 way, 415Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.

Supply & fixing MCB DBs TPN vertical, Double door, with provision of MCCB as incommer , 4 way, flush in wall, including civil work to match the disturbed surface with existing complete all as specified and directed.

S&F MCB TPN, 63 Amps,415 Volts, rupturing capacity 10 KA."B" Series complete all as specified and as directed.

S&F MCB TP, 25 to 63 Amps,415 Volts, rupturing capacity 10 KA."B" Series complete all as specified and as directed.

S&F MCCB of capacity 100 Amps , 415 Volts, rupturing capacity 16 KA complete all as specified and as directed.

S&F MCB SP, 5 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series complete all as specified and as directed.

M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.3 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed. Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II. (ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule. (iii) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (iv) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.

Supply and lay pipe uPVC pipe including fittings of size 50 mm (2.0") dia complete all as specified and directed.

Supply and lay pipe uPVC pipe including fittings of size 25 mm (1.0") dia complete all as specified and directed.

supply and fix ball valve 25 mm dia including all fittings all as specfied and directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete,complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 250m sweep with, blades, and frame and louvers All as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame All as specified and directed.

Supply and fixing electric water heater, storage type steel body with inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and directed.

S&f angle holder backlite with 1x10 Watt LED Bulb and making of connection with twin core flexible copper conductor from ceiling rose to fitting complete all as specified and directed.

Taking down and Repair of celing fan, Re-winding, painting , overhauling , greasing and replacement of U/S componante like capacitor to make functional including provision of 3 core flexible copper conductor from ceiling rose to fan complete all as specified and directed .

Taking down electric meter and refixing after complation of work and connecting from DB etc complete all as specified and as directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Taking down cement plaster, any description, on brick or blockor stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 over block or stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.

M&L for 15 mm thick rendering on stone block or masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.

M & L for preparation of newly plastered surface on walls and applying two coat of acrylic weather proof paint (Exterior grade) over a coat of primer complete all as specified and directed.

Taking down chowkat or frames n.exc 1.5 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and as directed.

Taking down chowkat or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store complete all as specified and as directed.

Taking down shutters of any description and in any position exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Virified Ceramic tiles light shade 8 to 9 mm thick (square/rectangular) polished/Matt/Glossy, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in epoxy grout and including 15 mm thick screed bed in CM 1:4, complete all as spcified and directed

All as above but on vertical surface as in skirting/Dados over 8 to 9 mm thick plaster cm 1:4. complete all as specified and as directed.

M& L for applying Cement putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as all specified and directed.

S&F in repair 150 mm long floor door stopper of a brass body and tongu with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F (concealed / open)20 mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and as directed.

S&F (concealed / open) 25mm outer dia CPVC pipes & fittings SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl drilling to holes in walls and fixing clamps as required complete all as specified complete with fitting including taking down existing GI tubing 15mm bore complete all as specified and as directed.

Demoltion of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick Granite jet Black (of any type) work (table rubbed and polished) in cooking plateform, Jambs cill and like set in cement mortar (1:4) inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including rounding of exposed edges of slab smoothly and polished complete all as specified and directed.

S&F Single Piece WC with PP Close Seat cover Hinges Dual Flush Cistern Fitting Fixing Accessories And Accessories set size 360x640x685 mm S Trap 110mmas approved and directed. (Make : Jaquar/Kohler/ Cera)

S&F in repair vitreous china Counter/ Table top Wash hand basin (White) of size (570x420x195 mm) mm complete all as specified and as directed. (Cat No. FLS-WHT-5601) Make: Jaquar/Equivalent

S&F Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15 mm nominal bore (Cat No.ARI-CHR-39233NK) Make: Jaquar/Equivalent

S&F 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F in repair Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair Stop valves, fancy type chromium plated ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified and as directed.

S&F stainless steel health faucet witrh 1 Mtr tube and hoock complete all as specified and directed. Confirming to Cat part No ALD573 of jaguar/PRAYAG complete all as specified and as directed.

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified and as directed.

M&L for complete removal of existing roof treatment incl brushing and applying neat cement slurry with 3 Kg/Sqm of cement complete all as specified and directed.

M&L for averaging 25mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding incl water proofing compund complete all as specified and directed.

M&L Rendering 10 mm thick of CM 1:4 on concrete roof surfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight. complete all as directed.

M & L for water proofing treatment to roof slab by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying APP modified membrane pre-fabricated , reinforced with non woven polyester , of 3.00 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps complete all as specifiedand directed.

M&L cleaning surface and applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and directed.

M&L for vitrified tiles Fullbody 8 mm thick, Light shade (square/rectangular) polished/Matt/Glossy, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nanital or similar pattern roof covering complete all as specified and as directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantilng wrought iron or mild steel work of any description not otherwise provided for all as specifed and directed.

M&L Steel work in tubular trusses, Pillars including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1998 grde St-240 ,complete all as specified and as directed.

M&L for framed brackets of angles or tees with web and franges cut to shape, drilled and countersunk for screw incl bending and welding angles, as necessary gusset plate plates, reviting etc 10 kg each brackets confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed.

S&F in repair 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

M&L prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint fixed to wall complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks ccomplete all as specified and as directed.

S&F 18 mm thick prelaminated PVC Cheluka ply prelaminated one side with decorative choice lamination and other side plain fixed with screws to PVC celuka ply works all as directed and as per manufacture instructions Make : Rajshree plasticwood

All as per Above item but 18 mm thick plain cheluka plywood complete all as specified and as directed.

All as per Above item but 12 mm thick plain cheluka plywood complete all as specified and as directed.

All as per Above item but 05 mm thick plain cheluka plywood complete all as specified and as directed.

M & L for preparation of old decorated surface on walls and applying two coat of acrylic weather proof paint (Exterior grade) over a coat of primer complete all as specified and directed.

M & L existing treatment on old walls and applying two coat of distemper oil emulsion complete all as specified and directed.

M & L existing treatment on old ceiling and applying two coat of distemper oil emulsion complete all as specified and directed.

S&F in repair towel rack stainless steel 600 mm long shelf with lower hangers complete all as specified and as directed and approved GE.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and directed.

S & F of Corner Glass Shelf (with Bracket) CAT NO ACN-1173 JAGUAR or equivalent incl all fittings and accessories all as spd and directed

S&F Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S & F in repair Stainless steel curtain rods 25mm dia fancy type with required supports, and open/end brackets complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Co mposite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp-ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fire retardant

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgen polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F in PVC Wire wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Partition basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Plain basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F in repair Kitchen basket stainless steel for Dish(plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed.

S&F in repair Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed.

S&F Brass, sliding door bolt 300 mm with sand or die-cast brass has staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F brass Handle fabricated type polished of Size 100 mm complete all as specified and as directed.

S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F in repair sinks laboratory made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F for continuous (piano) hinges, mild steel, bright finish or electrogavanised, width of flaps (when open) 40mm complete all as specified and as directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames 92 X29.6 X1.10mm , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : Making all edges i.e. cill and jamb good by cement mortar 1:3

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Supply and Fix in repairs, seamless ceiling with using 12mm thick, factory made gypsum fiber board, fixed on GI frame work for seamless ceiling suitable for suspended system with and including applying two coats of oil bound distemper over a coat of primer to give even and smooth finish without showing any joints complete all as specified and directed.

Demolition of pre-cast concrete block masonry built in cement mortar of any description in any position complete all as directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm graded stone aggregate in the proportion as directed) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

S&F30 mm wide & 1 mm thick PVC edge bending of PVC pasted on edges with suitable adhesive, complete as specified and directed.

S&F auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed.

S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and as directed.

M&L for 15 mm thick plaster in cement mortar (1:4) on brick or block or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified and as directed.

M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finishcomplete all as specified and as directed..

M & L powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specified and as directed.

S & F in repairs 900 x 800 x 260 mm plate rank of stainless steel with steel shelves make out of 0.7 mm thick steel sheet and hanging arrangement for utensil including taking down existing complete all as specified and directed

M&L Excavation in over areas nt exc 1.5mt depth and getting out any type of soil complete all as specified and directed

M&L Excavation in over areas exc 1.5mt and nexc 3.0 m depth and getting out any type of soil complete all as specified and directed

M&L Excavation in over areas exc 1.5mt and nexc 3.0 m depth and getting out SDR complete all as specified and directed

M&L Excavation in over areas exc 3.0mt and nexc 4.5m depth and getting out any type of soil complete all as specified and directed

M&L Excavation in over areas exc 3mt and nexc 4.5 m depth and getting out SDR complete all as specified and directed

M&L Excavation in over areas exc 4.5mt and nexc 6.0 m depth and getting out any type of soil complete all as specified and directed

M&L Excavation in over areas exc 4.5mt and nexc 6 m depth and getting out SDR complete all as specified and directed

Returning, filing in, incl spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil/rock complete all as specified and directed

Removal of excavated soil to a distance exc 50m & n.exc 100m & deposited at a level n.exc 1.50m above from starting point complete all as specified and directed.

M & L PCC (1:4:8)type D2(using 40 mm grade aggregate) in foundation filling and mass concrete complete all as specified and directed

M&L Walling of stone masonary squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM(1:6) complete all as specified and as directed.

M&L for loose filling broken brick Ballast of gauge 40 to 80 mm complete all as specified and as directed.

M&L for RCC Nominal Mix type B1 (1:2:4) 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span graded aggregate for Beam complete all as specified and directed.

M&L for RCC Nominal Mix type B1 (1:2:4) 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for use & waste for Form work for rough finished surfaces of concrete measured flat for Beam complete all as specified and directed.

M & L for Form work for fair finished surfaces of concrete measured flat for slab complete all as specified and as directed.

M&L for Reinforcement Steel(TMT bars)Fe 500d TMT bars 10mm dia & over of Grade Fe 500d complete all as specified and as directed.

M&L for Reinforcement Steel(TMT bars)Fe 500d 5 to 10mm dia in stirrups, spacers & binder etc; complete all as specified and as directed.

Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast Slab complete all as specified and as directed. (Reinforcement will be paid seperately)

M&L for NP2 pipe 450 mm dia complete all as specified and as directed.

Earth work in excavation in soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed.

M & L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 (using 20mm and 12.5 mm graded stone aggregate in the proportion as directed exc 10 cm in width and set and jointed in C M 1:6 complete all as specified and directed.

M&L PCC 1:2:4 type B2 using 12.5mm graded stone aggt as in coping complete all as spd & as directed.

M&L for rendering 10mm thick on fair face of block masonary in CM 1:4 and finishing even and smooth without using extra cement complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) for surface channel including weathering slightly rounded or chamfered including formwork complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement, including forming moulds, mitered/stopped ends etc. complete all as directed.

Removal of excavated surplus material soil/spoil to a distance exc 50 m n.exc 150 m including debries lying at site and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Dismantaling and taking down copper / aluminium point wiring any type / size complete with removing all connection and accessories such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface complete all as specified and as directed.

Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten/conduit etc and making good the disturbed surface to match the existing disturbed surface all as directed.

Taking down old and unsrevicable sheet metal enclosure , switch fuse unit , distribution bord any type /way / capacity including fuses,MCB's , insulator etc complete after removing all connection and making good the disturbed surface all as directed.

M&L for Point wiring complete with FR PVC insulated unsheathed , 1100 V grade conforming to IS 694 , 1.5 Sqmm (Norminal area) multistranded ,copper conductor cable drawn through in non metallic rigid PVC conceled medium grade ,minimum 20 mm dia, ISI Marked, with sutaible size of 1 to 8 module metal flush boxes and back plate for mounting of modular switches/socket and regulators and including modular fornt plate with all acessories complete all as specified and as directed.

(a) One light point controlled by one way one switch SP 5 Amps ,240 V.

(b) One light point controlled by two 2 way switch SP 5 Amps ,240 V.

(c) One ceiling/exhaust fan point controlled by one way one switch SP 5 Amps, 240 V.

(d) One switch socket outlet 3 Pin, 5 Amps, SP on independent board.

(e) One switch socket outlet 3 Pin, 5 Amps, SP on same board.

(f) One bell / buzer point controlled by one push button switches on independent board .

All as per the above item No 117 herein before but with 2.5 Sqmm cable for 3 Pin 5/15 Amps switch socket outlet complete all as specified and as directed.

S&F modular switch one way 6 Amps , 1 module type complete all as specified and as directed.

S&F modular switch two way 6 Amps , 1 module type complete all as specified and as directed. .

S& f modular socket , 6 Amps , 2/3 pin combined 2 module complete all as specified and as directed.

S& f modular switch socket combination, 6 Amps / 16 Amps , 2/3 pin combined 2 module complete all as specified and directed.

S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked complete all as specified and as directed.

S&F Bell push 6 Amps 1 module complete all as specified and as directed.

S&F bell Multi music type , 240 Volt , Single Pole ISI marked complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting upto PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit including as per site requirement and 2 Nos of round or square PVC bolck for fixing of FTL fitting complete all as per directed.

Supply and fixing of mirror light of capacity 1x10 Watt epoxy white powder coated CRCA sheet steel housing with acrylic diffuser gaskat with all fixing acessories complete all as specified and directed.

Supply & fixing modular fan regulator step type , 1 module complete all as specified and as directed.

M&L for sub main wiring with Four runs of 10 Sqmm (4x10 sqmm )1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductor cable confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in walls/roofs/floors etc with one run of 10 Sqmm (1x10 sqmm ) single core FR PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed. Note:- 2 runs of 10 Sqmm ,one run of 10 Sqmm ( 2x10 sqmm + 1x10 sqmm ) cable and one meter of conduit will be measured as one unit again.

S&F sheet metal enclosures for distribution board when MCB to be used TPN ( Triplepole and neutral ) 4 way, 415Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, double door type complete all as specified and directed.

Supply & fixing MCB DBs TPN vertical, Double door, with provision of MCCB as incommer , 4 way, flush in wall, including civil work to match the disturbed surface with existing complete all as specified and directed.

S&F MCB TPN, 63 Amps,415 Volts, rupturing capacity 10 KA."B" Series complete all as specified and as directed.

S&F MCB TP, 25 to 63 Amps,415 Volts, rupturing capacity 10 KA."B" Series complete all as specified and as directed.

S&F MCCB of capacity 100 Amps , 415 Volts, rupturing capacity 16 KA complete all as specified and as directed.

S&F MCB SP, 5 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series complete all as specified and as directed.

M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.3 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed. Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II. (ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule. (iii) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (iv) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.

Supply and lay pipe uPVC pipe including fittings of size 50 mm (2.0") dia complete all as specified and directed.

Supply and lay pipe uPVC pipe including fittings of size 25 mm (1.0") dia complete all as specified and directed.

supply and fix ball valve 25 mm dia including all fittings all as specfied and directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete,complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 250m sweep with, blades, and frame and louvers All as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame All as specified and directed.

Supply and fixing electric water heater, storage type steel body with inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and directed.

S&f angle holder backlite with 1x10 Watt LED Bulb and making of connection with twin core flexible copper conductor from ceiling rose to fitting complete all as specified and directed.

Taking down and Repair of celing fan, Re-winding, painting , overhauling , greasing and replacement of U/S componante like capacitor to make functional including provision of 3 core flexible copper conductor from ceiling rose to fan complete all as specified and directed .

Taking down electric meter and refixing after complation of work and connecting from DB etc complete all as specified and as directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.