REPAIR AND MAINTENANCE OF STREET LIGHT SECURITY LIGHTS AND CONNECTED MISC ITEMS AT AF STN MOTHALA UNDER GE (AF) NALIYA

Amount

Dismantling / taking down LED 40/65/70/100/150W street light / security lights/High Mast of any capacity & description from exising LT pole/walls, at any height and refixing the fittings in existing / another location after repair work or carrying to MES store and all as directed. Note :- (i) Replacement of defective parts accessories shall be measured and paid separately under relevant item of Sch 'A' as supply and fix in repair. (ii) Transport and T & P i.e. Ladder, spanners or any other equipment for repair of street light shall be provided by Contractor and cost for the same deemed to be included in respective item of Sch 'A'

M & L for street light brackets made of 40 mm dia G.I. Pipe light grade in shape and angle as directed not exceeding 1.5 mtrs in length fixed to pole with suitable size of M.S. clamps made of M.S flat of size 40 mm x 3 mm, 2 Nos, M.S nut & bolt with cup washers and dismantling old rusted/unserviceable bracket with its rusted clamps and nut bolts complete all as specified and as directed.

S&F in replacement Street light timer analog clock type with suitable for connection with three phase supply and connected to existing contact for cotntroling complete all as specified and as directed.

Supply and fix in repair 1100 volts grade PVC insulated PVC sheathed cable weather proof multisranded/ solid aluminium conductor 3 core 4.0 sqmm from jn box to connector of fitting complete all as specified and as directed.

Supply and fixing in repair in existing street light panel and connection with bus bar out going cable with copper wire with MCCBs of the undermentioned sizes complete all as specified and as directed.

MCCB 4 pole 'C' curve 100 Amps, 415 Volts AC, 16 kA

MCCB 4 pole 'C' curve 40-63 Amps, 415 Volts AC, 16 kA

Supply and fix in existing Street light panel and connection with bus bar out going cable with copper wire with power contactors 3 phae, 415 V, 40 Amps, in repair complete all as specified and as directed

S & F in replacement of T-5 Fittings of 2x24W/US street light with LED street light minimu of 60 W IP 65/66 protected, Powder coated pressure die cast aluminium High Power LED Street light with heat resistant toughened glass with driver , bracket etc complete all as specified and as directed.

S&F in replacement kiosk box for luminaries, weather proof made out of PVC/HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of aluminium TPN bus bar of 60 Amps of minimum size 300x250x150mm, fixed on pole with MS, clamps 30x5mm with necessary nuts, washer complete all as directed. Note: Rate of TPN bus bar and MS clamp inclusive in quoted rate

Supply & Fix in replacemet of High efficiency long life CREE LED chip in modules of following capacity with Ra>75 and lumen efficacy of >95 lum/watt or equivalent suitable forsuitable for LED light fitting complete all as specified and directed.

100/150 Watt fittings

50/90 Watt fittings

40/45 Watt fittings

Supply and fix in replacement LED street light fitting driver of exisiting make and model of rating 40 Watt complete all as specified and as directed.

Supply and fix in replacement LED street light fitting driver of exisiting make and model of rating 60 W to 150 Watt complete all as specified and as directed.

Supply & fix in replacement of LED Post top of 25 Watt Integral pole mounted decorative LED with IP-65 protection complete fixed on existing post, all as specified and directed.

S & F auto/manual street light timer nature switch weather proof enclosur made out of UV satbilized, FR grade special moulding with mounting bracket made out of GI and nut,bolts, washers including cable gland, openable door with 08 KW three phase load with Power contactor 03 Nos as incomming and outgoing with MEC rating of 32 amps/Phase and circuit wiring of min 16 sqmm complete all as specified.

AARTI ENTERPRISES

M/s. Shree Shakti Enterprise