Construction of passage from Trauma ward RAMP TO Robotic surgery area in Dr R.P. Govt. Medical College Tanda in Distt Kangra (HP) Deposit work

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres (Fifty metres) lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) complete as per direction of Engineer-in- Charge including carriage of materials within all leads, lifts and other incidentals.

Brick work with common burnt clay F.P.S. (Non modular) building bricks of class designation 7.5 (Seven point five) conforming to IS :2222 in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge.

15mm (Fifteen millimetre) thick cement plasters in single coat on rough/fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth witth cement mortar 1:6 (One cement : Six sand) above plinth level to floor all level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge.

Providing and applying white cement based putty of Birla / JK average thickness 1mm (One millimetres) thick, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge.

Wall painting two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge.

Providing and fixing 18 mm (Eighteen millimetres) thick gang saw cut, mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture granite laid over 20 mm (Twenty millimetres) (average) thick base of cement mortar 1:4 (One cement : four coarse sand) laid and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing curing, moulding in single or double layer and polishing to edges to give high gloss finish etcetra all as per HPPWD technical specification complete in either direction as per the satisfaction of Engineer-in-charge and including entire carriage of material and within all leads, lifts and cost of all other incidentals.

Providing and laying cement concrete 1:2:4 (One cement: two sand: four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth,as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing colour coated / anodised aluminium work for door frame, window, ventilators and glazed partitions frame with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and as per the directions of Engineer-In-Charge including carriage of materials within all leads and lifts and other incidentals.

Providing and fixing colour coated / anodised aluminium work for door, window, ventilators and glazed partitions shutter with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and as per the directions of Engineer-In-Charge including carriage of materials within all leads and lifts and other incidentals. including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing 12mm (Twelve millimetres) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc; with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic With float glass panes of 5.0 mm (Five point zero millimetres) thickness (weight not less than 12.50 kg/ sqm) (Twelve point fifty kilograms/square) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 300x16mm (Three hundred fifty into sixteen millimetres) anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 200xx10mm (Two hundred into ten millimetres) size aluminium tower bolts (barrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 125 mm (One hundred twenty millimetres) aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc; complete.as per drawing and HP.PWD technical specifications and as directed by Engineer-Incharge including carriage of material within all leads, lifts and other incidentals.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge With stainless steel cover plate minimum 1.25 mm thickness complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 110mm (One hundred ten milimetres) diametre on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.

PProviding and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

110mm (One hundred ten milimetres) diametre Coupler

110mm (One hundred ten milimetres) diametre Bend 87.5o

110mm (One hundred ten milimetres) diametre Plain Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty iknto fifty into fifty millimetres) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (One cement : Four coarse sand) and making good the wall etc. complete including entire carriage of materials as per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametre with prepainted limpet and rubber washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including entire carriage of materials within all leads, lifts and other incidentals

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers 0.63 mm thick with zinc coating not less than 275 gm/m²complete including entire carriage of materials within all leads, lifts and other incidentals

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 0.63 mm thick with zinc coating not less than 275 gm/m²complete including entire carriage of materials within all leads, lifts and other incidentals