Over Houling of Existing Sewerage Pumping Station Providing & Fixing Pumping Machinery with Safety Grill, Installation at Bhuj Nagarpalika, Dist: Katch

NAME OF WORK :- Over Houling of Existing Sewerage Pumping Station Providing & Fixing Pumping Mashinary with Safety Grill,

Instalation at Bhuj Nagarpalika, Dist: Katch

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter

with internal cement mortar lining including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS - 8329 / 2000) Rate for DI pipe

based on wholesale price index of Pig Iron as 157.60 for the month of Dec-2022. For

sewerage project cement mortor lining shall be with sulphate resistance cement

225.00 100 MM DI Pipe K-9 D/F 2120.00 RMT

110.00 150 MM DI Pipe K-9 D/F 2986.00 RMT

88.00 200 MM DI Pipe K-9 D/F 3898.00 RMT

50.00 300 MM DI Pipe K-9 D/F 6546.00 RMT

10.00 450 MM DI Pipe K-9 D/F 12515.00 RMT

Providing and supplying D. I. pipes for following nominal bore diameter with internal

cement mortar lining including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to departmental stores,

stacking etc. complete. (IS 8329-2000).

3620.00 200 MM DI Pipe K-7 1880.00 RMT

250.00 450 MM DI Pipe K-7 5418.00 RMT

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees,

reducers or any other specials as per BS-EN-545/1995 Class-A series K12 suitable for

use with D.I. Pipes manufactured as per IS:8329/1994 delivery of specials is to be

made to GWSSB store or site of works any where in Gujarat including all taxes,

loading, unloading, carting, stacking, insurance, inspection charges, octroi etc.

919.73 Socket & Spigot type 80 to 300 mm dia 148.00 KG

179.40 Socket & Spigot type 350 mm dia & above 151.00 KG

6800.00 DI Specials (DI bend , Tee, etc.) 148.00 KG

760.00 DI Specials (DI bend , Tee, etc.) 151.00 kG

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all

with shoring and struting if required as per required gradient and line including

safety provisions using site rails and stacking excavated stuff including up to all

required lead cleaning the site etc. complete for all lifts and strata as specified. Upto

a)Excavation for pipe line trenches 0 to 1.5 m Depth Ordinary soil & Soft Murram

319.60 b) Hard murrum 155.25 CMT

1026.80 c) Soft Rock 187.45 CMT

639.62 d) Hard Rock / C.C Road 427.80 CMT

Providing and making flanged joints to flanged DI /C.I. pipes of all classes /specials

etc. includingcost of all jointingmaterials rubberpacking, nut bolts, inclduing

lowering laying jointing labour hydraulic testing etc. complete.

225.00 100 MM DI Pipe K-9 D/F 548.55 RMT

110.00 150 MM DI Pipe K-9 D/F 702.65 RMT

88.00 200 MM DI Pipe K-9 D/F 962.55 RMT

50.00 300 MM DI Pipe K-9 D/F 1406.45 RMT

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

10.00 450 MM DI Pipe K-9 D/F 2450.65 RMT

Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar

lined D. I. Pipes of various classes with CI / MS specials of following diameters in

proper position, grade and alignment as directed by Engineer-in-charge including

hydraulic testing etc. comp.

3620.00 200 MM DI Pipe K-7 113.85 RMT

250.00 450 MM DI Pipe K-7 304.75 RMT

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of

surplus stuff as directed within a radius of 3 km.

Providing and fixing 50cm wide M.S. Ladder fabricated from M.S. Flats 10mm x75

mm with 20 mm dia steel bar steps in double rows, @30cm C/C. The include stays of

160.00 10mm x 50mm flats fixed at 3 meter C/C with welding anchoring and 3 coats 2950.00 RMT

anticorrosive paint.

Supply, installation, testing & commissioning of sewage submersible, non clog type

suitable for working on three phase, 50 Hz ± 3%, 415 V ± 10%, AC supply, 1450 RPM

synchronous speed with 3 core flat copper cable from pump to starter panel with

cable end terminations, all supports, clamps, pipe fittings along with mechanical

seal, bearing bush, strainer etc. complete set & following M.O.C: Casing: CI,

Impeller: SS CF8M, Wearing ring & Bearing bush: Bronze, TC mechanical seal, CS / SS

bearing, SS shaft with sleeve, SS strainer & MS motor body.

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

DOL / Star Delta starter suitable for local & remote pump control application

consisting of MPCB, overload relay and contactors as per Type II coordination

including digital voltmeter, analogue ammeter with selector switch, run hour meter,

required protective relays & control accessories.

20 DOL/SD 10 HP 9128.00 NOS

6 DOL/SD 15 HP 11119.00 NOS

2 DOL/SD 20 HP 13771.00 NOS

Auto Transformer Starter suitable for local & remote pump control application

consisting of Auto tansformer (vacuum impregnated, air cooled having three (3)

appings at 50%, 65% and 80%), incomer MCCB / PCB, overload relay and

contactors as per Type II coordination including digital MFM with RS

communication port, analogue type ammeter with selector switch, run hour meter,

required protective relays & control accessories.

2 A. T. S. from 30 HP 24276.00 NOS

2 A. T. S. from 40 HP 33403.00 NOS

1 A. T. S. from 50 HP 37804.00 NOS

2 A. T. S. from 60 HP 46238.00 NOS

Add for providing indicating & measuring instruments complete with accessories,

associated wiring & controls of following type & rating 3 Phase, 4 Wire

Multifunction Meter, Class 1.0 or better, Flush Mounting 96 x 96 mm with RS

communication port for Incoming(s) / Outgoings(s), as required.

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Add for providing indicating & measuring instruments complete with accessories,

associated wiring & controls of following type & rating On / Off / Trip, Control

Supply ON/ Healthy Indicating lamps (24 / 110 V DC or 110 V AC) for MCCB

90 controlled Incomming/ Buscoupler module(s). 634.00 NOS

Above 16 A, upto & including 80 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS/

IEC 60947-2 with trip free mechanism, current limiting type with Thermal Magnetic

/ Microprocessor release (O / C, S / C & E / F) with adjustable settings & having

minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-

11 Mechanical protections & interlocks etc. MCCB module, when used as Outgoing(s), 20607.00 NOS

shall have enclosure dimensions- 300(H) x 500(W) x 600 (D) & following technical

features: 3 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of

Icu), TM release

Providing Chain pulley block with triple gear arrangement, lifting hook, laod chain &

hand chain & locking device etc

13 1 T Manually Operated 6 m 17400.00 SET

96 Additional lift 1 m 840.00 RMT

Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest

Edition) of following class and diameter including all taxes, insurance,

transportation, freight,charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. PN-1.6 With hand wheel

/cap operated (Alt 1 type long body)

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Providing and Supplying ISI Mark CI D/F Valves as per IS : 5312 (Latest Edition) of

following class and diameter including all taxes, insurance, transportation,

freight,charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. Reflux valves PN 1.6 IS 5312 with ISI

Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly

valves, Sluice valves and Air valves including cost of all labour, jointing material,

including nut bolts and giving satisfactory hydraulic testing, etc. Complete . Suice

valves, Butterfly Valves, Reflux Valves

Supply, laying, testing & commissioning of 1.1 kV grade, XLPE insulated, stranded

Copper conductor, galvanised steel flat strip / round wire armoured, extruded PVC

type ST2 sheathed, heavy duty cable (to be laid on wall surface with necessary

clamps / in existing cable trench / cable trays / conduit / pipe sleeves at road

crossing or floor as per site requirement) conforming to IS: 7098 (Part-1) & IEC:

(Part-1) of following sizes:

160.00 4 Core x 16 Sqmm 423.00 RMT

380.00 4 Core x 50 Sqmm 1308.00 RMT

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Dewatering by pumping set required capicity including temporary platform carting

pumping at site and fixing the same in position including all accessories, fuel and

labour etc. complete.

Float/ Displacer Type Level Switch: Design, Supply, Installation, Testing and

Commissioning of Top mounted Displacer Type level switches with 2 nos SPDT

contacts of Micro switch rated 5 A, potential free power supply, Material of wetted

parts shall be SS 316 and the material of accessories shall be SS. IP 65 or equivalent

degree of protection for enclosure, suitable for sump, ESR, tank, vessels and

31 underground reservoirs. The top mounted level switches shall be supplied with still 12802.00 NOS

tubes to suit the requirement. Accessories like name plate, mating flange, gaskets,

fasteners, bolts & nuts, etc. shall be supplied with the Level Switch of following

Fuse 3 Phase wiring, coupiling jointing cable fixing in wooden board and other fitting

10 accessories including satisfactory testing (each wooden board 4 nos fuses) 10000.00 JOB

Purchasing & supplying at site of works, with Railway freight, loading, unloading,

carting, etc. complete such as joints, channels, angles, iron rails, etc. Angles &

channels below 10 mm thickness

2.85 Angles & channels below 10 mm thickness 64838.00 MT

1.94 M. S. Flats of various thickness 66408.00 MT

Labour charges for lowering laying, erecting, fixing,various size of M.S. section such

as joints channel, angles plates etc. complete.

2.85 a) Angles & channels below 10 mm thickness 9801.45 MT

1.94 b) M. S. Flats of various thickness 13069.75 MT

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Painting two coats (including priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of all dirt, dust and other

foreign matter.

Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to

give an approved brand and manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and remains of loose powered

2125.00 materials. every subsequent coat of water proofing cement paint of approved brand 93.88 SQM

and manufacture.

Distempeing (Two coats) with oil bound washable distemper of approved brand and

manufacture and of required shade on wall surfaces to give an even shade, over and

including a priming coat with alkali resistance primer of approved brand after

thoroughly brushing the surface and other foreign matter and also including

preparing the surface even and sand parpered smooth.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

740.00 marked copper wires of following size to be erected as directed. (i) 2.50 Sq.mm 4 107.06 MTR

core round PVC sheathed

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Providing and cast in situ C.C. in grade M 30 proportions of ingredients as permix

design by weigh batching using granite, quartzite trap metal of size 12 mm to 20mm

and or 6 mm to 12 mm including scaffolding centering formwork, needle vibrated

consolidation, curing and hydraulic testing etc. complete (excluding cost of

39.30 reinforcement) with centering and shuttering /de shuttering etc.comp. upto 6 meter 8213.00 CMT

height /depth Av. G.L.for all water retaining structures, Flat bottom slab/floor

slab/slab with shuttering

Providing the gunniting to interior surface of cement / masonry / Water Tank of

various capacities as specified at various places with cement mortar (1:2) in

thickness of 40 mm including chiselling and scraping loose concrete and plaster incl.

providing and fixing in position 6 mm dia. mild steel bars reinforcement at 15 cm c/c

both ways including fabricating and cost of binding wires including centering

24.00 staging all equipments etc. complete including scaffolding , carting of all type of 547.32 SQM

material and equipments to site of work and giving hydraulic testing up to

satisfaction of engineer in – charge . For top , bottom of ESR/ GSR/tank /cistern - for

Drilling 40 mm Dia. Holes in masonry/concrete structures with providing and fixing

290.00 500 mm long GI Pipeline for pressure grouting including supply of material, 458.04 RMT

machineries and labour cost etc. complete.

Demolition including stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work

Providing and laying cement concrete pavement (25mm to 50mm thick) with 1:2:4 (1-

16.00 cement : 2-coarse sand : 4-stone aggregate 20mm nominal size) including finishing 4503.67 CMT

with floating coat of neat cement complete.

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

1435.50 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 136.92 CMT

disposited layer by ramming and watering.

Providing and fixing EZ-7 section door/window frame including welding and fixtures

158.20 fastenings including 3 coats of approved enamel oil paint etc complete. 2378.49 CMT

Supplying & erecting single phase approved make industrial exhaust fan suitable for

medium duty ring mounted low noise operation suitable for medium duty having

12 following dia size and maximum speed in RPM [E] 450 mm dia 1400 RPM Cat-II 3937.99 NOS

Supply, testing & commissioning portable diesel driven self priming horizontal mono

dewatering pump set with four wheel trolley , GI medium duty delivery pipes,

6 specials, suction strainer etc. complete set Material of Constructions: Impeller: 30864.00 NOS

Bronze, Casing: CI, Shaft: Carbon Steel

Manufacture, supply and delivery of following ISI marked HDPE pipes (IS:4984/1985

with latest amendment) having material Grade PE-80 in approximate 100 meter coil

length or as per GWSSB requirement with SS 316 nipple at both ends having 11 TPI

270.00 threadsasper specifications, press fitted and bolted having nominal diameter as 392.00 RMT

under as per detailed technical specifications.

Designing (aesthetically) and constructing R.C.C frame structure of panal room with

Negative suction ,Without Gantry structure (Upto 3.60 M)

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Providing and cast in situ C.C. in grade M-30 proportions of ingredients as permix

design by weigh batching using granite,quartzite trap metal of size 12 mm to 20mm

and or 6 mm to 12 mm including scaffolding centering formwork, needle vibrated

consolidation, curing and hydraulic testing etc. complete (excluding cost of

4.26 reinforcement) with centering and shuttering/deshuttering etc. comp. upto 6 meter 8412.00 CMT

height /depth Av. G.L.for all water retaining structures ,Vertical Wall ,Above 15 cm

and up to 20 cm

Supplying cutting, bending, binding and placing in position steel as per planand

design and as per ISS 2502 including cost of steel and binding wire for reservoirs/

0.85 structures only including lift upto 6 meter height or depth below G.L. for all 77504.00 MT

diameters ,deformed (TMT) bars confirming to relevant ISFe–500 grade for all

Puming Station in all pipe, Motor remove and new Pipe Fitting & all necessaries

fiting accessories etc. complete for Fitting.

Labour charges for cleaning of sump/GL cistern including cleaning and removing

algae, calcinations, sludge, dirt deposition from bottom and as well as fromwall of

9 container, disinfection by bleaching powder with all necessary tools and plants, 1707.00 NOS

labours and cost of disinfectant etc complete

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4)

(proportions as per mix design or as per Table 9 of IS 456 2000 in masses by weigh

batching) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work,

including scaffolding centering, formwork, needle vibrated consolidation, curing

64.00 comp. up to 6 meter depth or height (excluding cost of reinforcement and neat 4732.00 CMT

finishing) with centering and shuttering / deshuttering etc.comp. for structure for

other than water retaining.

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Preparing structural design of RCC Under Ground / Partially under ground / above

high ground level Reservoir of required capacity as per relevant I.S. standards and

constructing the same, including excavation in all types of soil strata (including rock)

including shoring strutting if required, for loose soil / to protect from collapse,

casting 100 mm thick P.C.C. levelling course in M15, Refilling the pit with proper soil

and disposing of the surplus stuff at all lead. Including cement plaster in CM 1:2 with

approved water proofing compound to all over inside container (i.e. walls, base, top

slab/dome bottom etc. all). Including all types of labour and material charges of

lowering, laying, erecting / hosting and jointing of pipe assembly to inlet, outlet

overflow, washout and bye pass arrangement as per hydraulic design. Providing and

fixing accessories, CI Manhole frame and cover, water level indicator, adequate cowl

type ventilators or lantern type ventilator with stainless steel jail. RCC chambers for

valves. Providing and applying three coats of cement paint / snowcem to the out

side face of structure. It also includes satisfactory water tightness test as per

relevant I.S. code and painting name of scheme and capacity on the tank as per

direction of engineer in charge.List of Indian Standards for Design of GSR /

SUMP:The structural design of GSR shall be in accordance with provisions relevant

I.S standards (1) I.S. 3370 part I & II 2009 or Its latest revision(1.1) I.S. 3370 part III &

IV 1965 or Its latest revision(2) I.S. 456 – 2000 or Its latest revision.(3) I.S. 1893 –

2000 – 1984 or Its latest revision. (4) I.S. 875, Part – 1 to 3, 1987 or Its latest

revision. General Specifications:(1) Water depth in container shall be adopted as per

data of tender. Capacity shall be calculated excluding free board of the reservoir. If

water depth is not specified, the suitable water depth / acceptable to field engineer

in accordance with hydraulic (2) Shape of container (in plan) specified by in data

shall be adopted in absence circular shape shall be adopted. (3) Size shall be fixed as

per availability of space (land area) at site / acceptable engineer in charge. (4) Effect

of overlapping of pressure bulbs on soil due near by structure and proposed sump

should be considered. (5) Care shall be taken that no damage should occur to nearby

existing structure. Compensation shall be paid for the same by agency.(6) The

minimum concrete grade for RCC shall be M-30.(7) HYSD Fe 415 / 500 grade

reinforcing bars confirming to I.S. 1786 / 1139 shall be considered in design. CRS /

TMT bars shall be provided. In saline atmosphere corrosion resistance stainless steel

/ HCR rebar shall be provided. Any other steel can be used with approval of C.E./ in

situation of non availability in market without extra cost. (8) Minimum size (or

thickness) of various components shall be provided as per tender criteria /

specifications in absence as per I.S./ Std. practice of G.W.S.S.B. Minimum dimensions

specified for various components in tender data / specifications shall be provided

without fail.(9) The safe bearing capacity (SBC) shall be referred from SBC test

report. In absence of report it shall be referred from data sheet. If poor soil is found

/ water table is met with during excavation SBC shall be scientifically ascertained and

I.S standards (1) I.S. 3370 part I & II 2009 or Its latest revision(1.1) I.S. 3370 part III &

IV 1965 or Its latest revision(2) I.S. 456 – 2000 or Its latest revision.(3) I.S. 1893 –

2000 – 1984 or Its latest revision. (4) I.S. 875, Part – 1 to 3, 1987 or Its latest

revision. General Specifications:(1) Water depth in container shall be adopted as per

data of tender. Capacity shall be calculated excluding free board of the reservoir. If

water depth is not specified, the suitable water depth / acceptable to field engineer

Quantities in accordance with hydraulic (2) Shape of container (in plan) specified by in data Tendered Rate

estimated but shall be adopted in absence circular shape shall be adopted. (3) Size shall be fixed as

Item of work Unit according to

per availability of space (land area) at site / acceptable engineer in charge. (4) Effect Rate in Figure estimated quantities

of overlapping of pressure bulbs on soil due near by structure and proposed sump

should be considered. (5) Care shall be taken that no damage should occur to nearby

existing structure. Compensation shall be paid for the same by agency.(6) The

minimum concrete grade for RCC shall be M-30.(7) HYSD Fe 415 / 500 grade

reinforcing bars confirming to I.S. 1786 / 1139 shall be considered in design. CRS /

TMT bars shall be provided. In saline atmosphere corrosion resistance stainless steel

/ HCR rebar shall be provided. Any other steel can be used with approval of C.E./ in

situation of non availability in market without extra cost. (8) Minimum size (or

thickness) of various components shall be provided as per tender criteria /

specifications in absence as per I.S./ Std. practice of G.W.S.S.B. Minimum dimensions

specified for various components in tender data / specifications shall be provided

without fail.(9) The safe bearing capacity (SBC) shall be referred from SBC test

report. In absence of report it shall be referred from data sheet. If poor soil is found

/ water table is met with during excavation SBC shall be scientifically ascertained and

design shall be revise. No extra shall be paid for increase in quantity. (10) DI pipes

and special shall only be used if type is not specified in tender.(11) The rate shall

include cost of dewatering during excavation making all arrangement when water

table meets within depth.(12) The structure shall be designed properly to resist

uplift due to ground water table specified in data or actual ground water table

meets with during excavation. If GWT / Uplift is mentioned in tender and during

excavation it dose not meet 7.5% rate shall be reduced. (13) SS pipes railing shall be

provided over sump perifery when sump height is ≥ 1.5 meter above ground level.

(14.a) RCC staircase/RCC Steps should be provided from GL to sump top slab based

on the height of the GSR above/below the ground. (14.b) RCC Staircase with SS

railing to be provided inside reservoir container. BB Masonry staircabin to be

provided to cover the same with MS safety door having locking arrangement. (15)

Appearance of structure should be aesthetically good looking acceptable to

authority. (16) Any change in size, shape, depth below GL, height above GL, water

depth, F.B., size of member etc can be permitted in exceptional case due to site

condition or hydraulic design requirement by C.E. No extra shall be paid for change.

(17) Any change in data, dimensions, shape, water depth, reduction in size if

permitted by competent authority and if it reduces quantity then payment shall be

reduced prorate. (18) When capacity of GSR / Sump is > 20 lakh litres two or suitable

compartments acceptable to executive engineer shall be designed and provided.(19)

Agency shall engage qualified (at least graduate) consulting engineer for designing

the structure and he / she shall visit the site for guidance of work.(20) 75% part rate

shall be payable for concrete, reinforcement and plastering items of container until

satisfactory hydraulic testing for water tightness is performed as per tender

condition. Till the work shall be treated as incomplete.Above conditions / general

specifications Sr. No. 1 to 20 are part and parcel of tender (contact) and prevail over

other provisions in tender. Note: For GSR (U/G sump) with cover slab to be

constructed at site situate in seismic zone V, the above rates shall be increased by

meets with during excavation. If GWT / Uplift is mentioned in tender and during

excavation it dose not meet 7.5% rate shall be reduced. (13) SS pipes railing shall be

provided over sump perifery when sump height is ≥ 1.5 meter above ground level.

(14.a) RCC staircase/RCC Steps should be provided from GL to sump top slab based

on the height of the GSR above/below the ground. (14.b) RCC Staircase with SS

railing to be provided inside reservoir container. BB Masonry staircabin to be

Quantities provided to cover the same with MS safety door having locking arrangement. (15) Tendered Rate

estimated but Appearance of structure should be aesthetically good looking acceptable to

Item of work Unit according to

authority. (16) Any change in size, shape, depth below GL, height above GL, water Rate in Figure estimated quantities

depth, F.B., size of member etc can be permitted in exceptional case due to site

condition or hydraulic design requirement by C.E. No extra shall be paid for change.

(17) Any change in data, dimensions, shape, water depth, reduction in size if

permitted by competent authority and if it reduces quantity then payment shall be

reduced prorate. (18) When capacity of GSR / Sump is > 20 lakh litres two or suitable

compartments acceptable to executive engineer shall be designed and provided.(19)

Agency shall engage qualified (at least graduate) consulting engineer for designing

the structure and he / she shall visit the site for guidance of work.(20) 75% part rate

shall be payable for concrete, reinforcement and plastering items of container until

satisfactory hydraulic testing for water tightness is performed as per tender

condition. Till the work shall be treated as incomplete.Above conditions / general

specifications Sr. No. 1 to 20 are part and parcel of tender (contact) and prevail over

other provisions in tender. Note: For GSR (U/G sump) with cover slab to be

constructed at site situate in seismic zone V, the above rates shall be increased by

150000.00 Cost above 200000 up to 500000 Ltr 2.89 LTR.

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

50 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) 8636.51 NOS

Back fill Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency. (c) For Electrical

Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (C) With oval

conduit /PVC casing capping double lock type

500.00 (c) 3 wire 1.5 sq. mm 76.76 MTR

500.00 (d) 3 wire 2.5 sq. mm 95.95 MTR

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

124 textured/metallic/white front plate modules erected on / in wall / ceiling as per 449.45 NOS

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with following type of

26 accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby 475.71 NOS

switchboard/mcb db board (a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete cat-III

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from

mcb db board. (a) with medium class Rigid PVC pipe and accessories erected flushed

on wall/ceiling complete cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79

72 & LM-80 Certificates) (NOTE: Below description have shown ranges of Wattage 373.70 NOS

capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral driver (iv) 22-24 Watts,

Surge - 2KV,IP-20, conventional 4 feet

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

45 driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 6088.28 NOS

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.) (B) Flood

Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (iii) Above 60 to 90 watts Cat-lll

Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm long

duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate, erected on wall or

39 corner for mounting street light luminaire with necessary hardware materials duly 343.40 NOS

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

18 following capacity (A) 6 to 32 Amp. Cat.III 278.76 NOS

Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos. MCB

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts

grouted in wall complete. [B] For 5.5 / 6.5 KG Capacity

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due

burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid)

12 adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. 299.97 NOS

(All above contents shall be of standard makes)

Providing and fixing printed instruction chart both in English and Gujarati and duly

14 framed with front glasses, for treatment of person suffering from Electric shock with 130.29 NOS

minimum 50" diagonally size.

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I.

sheet with extra handle at bottom duly painted white inside and Red out side with

14 FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall 214.12 NOS

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets

comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X

14 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted 942.33 NOS

with one coat of red lead and two coats of approved enamelled silver paint.

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b)4mm

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (c)12mm

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.

Supply and Install Solar CCTV Camera (Trueview solar camera T18164- AF(with

memory card), Product cod :- T18164 (BQ3A-GBM2), Technical Specifications Image

Sensor :- 1/2.8” CMOS Sensor Resolution :- 3MP, Video Compression Standard :-

H.264+ / H.265 / H.265+ , Infrared IR Distance :- 30 Meters , White IR Distance :-

Meters , Light Mode :- Full color / Infrared , Minimum Illumination :- Color : 0.01Lux,

Black and White : 0.001 Lux , Monitoring :- Android & iPhone / Windows PC

23 (Application Truecloud) , Storage :- Support Micro SD card (Max 256G), Solar Panel :- 36360.00 NOS

7W , Built in Battery :- 18000mAh Rechargeable , Power Supply Input :- DC 5V-2A

[Type-C], Power Comsumpution :- ≤8W , Working Temp :- 0~50oC RH Less than 95%

(No condensation), Dimension :- 132 x 191 x 170mm (WxHxL) , Net Weight :-

0.856.4kg , Gross Weight :- 1.9478kg,

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic

flow meter with factory calibration, Inbuilt Battery Power Operated, flanged

connection, Flow sensor, Indicator, transmitter and totaliser with all accessories viz.

surge arrestor, associated cables, cabinets, hardwares, etc complete as per following

specifications: DC pulsed type, IP 68 Protection, Flanged process connection as per

IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/

Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode,

Neoprene/ Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/

Carbon steel with Anticorrosive Paint Coil Housing with Junction Box, CS flanges.

Microprocessor based, Modular design, 2 line LCD for indication of actual flow rate,

forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec velocity,

one scalable pulse/ one status, one Modbus output, one GPRS/ GSM output, IP

protection, Die cast aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU

finish with glass window enclosure, Inbuilt EEPROM and Data Logger, 20 meters

cable length for sensor to transmitter communication, Minimum 5 years battery

lifetime, 3.6 VDC Non Rechargeable Lithium-thionyl chloride/ Ni-Cd high power

batteries, Hourly Basis Worldwide transmission of measured data and events via

e‐mail and SMS by integrated GSM/GPRS modem, Reliable data storage facility

through integrated SD card etc alongwith wall mounted/ stand mounted cabinet.

Full Bore Electromagnetic Flow Meter (Inbuilt Battery Power Operated)- PN

200mm Nominal Bore

1 450mm Nominal Bore 294706 NOS

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Drilling of 500 mm dia Horizontal bore hole for watermain pipeline under the railway

tracks incl all strata with requried length including fixing of 400 mm dia M.S. casing

pipe of minimum 6 mm thick with welding pushing etc complete Providing & fixing

various size of pipe for 193.7 mm /219.10 mm /244.5 mm dia watermain of G.I/M.S

pipe of minimum 6.3 mm thick for railway permises as per instruction & regulations

of Railway authority & under supervision of Railway authority incl Provinding,

supplying & fixing of spacerat specified interval if required between Casing pipe and

water main, ISI make sluice valve of required size at both side of railway boundry

2 with construction of brick edge pavement incl C:C encasing 1:3:6 in 10 mtr length of 407844 NOS

pipe at both side. Incl provinding & fixing of M.S/Iron Manhole frame with cover for

valve chamber with loacking arregment etc. complete with all material labour

fabrication,hydralic testing of pipe & valve etc complete for 45 mt Length.which

includes horizontal pushing and with open excavation. Without Water main & with

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Drilling of 500 mm dia Horizontal bore hole for water main pipeline crossing under

the road incl in all strata with requried length incl fixing of 400 mm dia M.S/RCC

1 casing pipe with pushing etc complete various size of pipe for 193.7 to 244.5 mm dia 358789 NOS

water main (For 45mt Length) Without Water main & with MS Casing Pipe-400

Note : gst will be paid as per government rules.

I/We am/are willing to carry out the work @............... % above/below ( Percent should be written in figures and

words ) The tendered amount mentioned above amount of my /our tender works out as under

Tendered amount Rs……………………….. Tendered amount Rs………………………..

Add ……...% above Rs…………………. Deduct ……...% Below Rs………………….

(Please strike out which ever is not applicable )

All work shall be carried out as per public works department handbook and other specifications of division or as directed.

Rates quoted inclusive of clearance of sight (prior to commencement of work and at its close) in all respect

and hold good for work under all conditions , sight, moisture, weather etc

one percent labor cess will be deducted from the valued work done as per ' Bulding and other construction

work welfare cess act' G.R. No. GHR - 2005/04/CWA/2004/841/M-3 Dt. 31/01/2005

Signature of the Contractor.