Construction of computer room and Library room at Boys Higher Secondary School Sopore

Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work..

Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:3:6 (1Cement: 3 coarse sand: 6 grade stone aggregate 20mm nominal size) including all carriages.

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level uoto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including hold fast lugs or with dash fasteners Klin seasoned and chemically treated Hollock Wood including all carriages.

Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incld carriage.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages.

Poviding Color coated Hi RIB GS Sheet Roofing fixed Polymer Coated Jor L Hooks Bolts AND NUTS 8 mm dia with Bitumen and GI Implet Washers upto A Pitch of 60 Degrees Excl of Purlins ,Rafters ,Trusses.0.50 MM Thick incld ridges and Valleys with carriage

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 incld carriage.

12mm Cement plaster of mix in 1 : 6 ( 1 cement : 6 coarse sand) including all carriages.

Providing and applying Wall putty of 2mmthickness over plastered surface to prepare the surfaceeven and smooth complete including all carriages

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications. Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm incld carriage.

Providing and fixing panelled or panelled and glazed shutters 35 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second kail wood incld carriage.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587 incld carriage.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages.

Providing and fixing of of Hardware Items of ISI Marked of standard Quality and make incld all fixtrures complete Job.Handles 125 mm incld carriage.

Providing and fixing of of Hardware Items of ISI Marked of standard Quality and make incld all fixtrures complete Job.Handles 100 mm incld carriage.

Providing and fixing of of Hardware Items of ISI Marked of standard Quality and make incld all fixtrures complete Job.T bolts 100 mm incld carriage.

Providing and fixing of of Hardware Items of ISI Marked of standard Quality and make incld all fixtrures complete Job.Concealed Locks 200 mm incld carriage.

Providing and fixing of of Hardware Items of ISI Marked of standard Quality and make incld all fixtrures complete Job.T Bolts 150 mm incld carriage.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate, including all carriages.

Providing and fixing of 4 mm thick ordinary glass pans to clrestory Window shutters (Area of opening for glass panes excld portion inside shall be measured) with beadings including cost of nails etc and all carriages complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, Size of tile 600x600 mm, including all carriages.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalen incld all carriage.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete, Fixed to steel windows by welding, including all carriages.

Electrification:Wiring for Light Point Fan Point /Exhaust Fan/Bell Point With (P+N+E) 3x1.5 Sq.mm FRLS-H PVC Insulated Multi Strand Copper Conductor single core Cable,(Havells/Polycab/Anchor/Eq Make) in surface /recessed Conduit laid in slabs ( Incld cost of Conduit 25 mm) with 01 No of 6 Amp Modular Switch, Modular plate, Cover in front and Suitable GI box etc ISO/IEC certified /Schneider/Havells/Legrand /Anchor roma plus/ABB/Eq.Make & Along with 2.5 Sqm (P+N+E) circuit Wire of Same make as mentioned above & Items shall be approved before execution of works by SDO.

Supply and fixing Two Module Stepped type Elecronic fan regulator on the existing modular plate switch box incld connections but excluding modular plate etc as required,ISO /IEC certified of Havells/Legrand/Anchor/Schneider/ABB/Eq Make and shall be approved before execution of work by SDO.

Wiring for Power Plug with (P+N+E) 3x4 sqmm FRLS-H PVC Insulated Multi Strand Copper Conductor Single Core Cable in surface/Recessed conduit (Havells/Polycab/Anchor/Eq Make).

Supply and fixing of suitable size GI Box with Modular Plate and Cover in front on Surface or in recess, including providing and fixing 6 Pin 5/6 & 15/16 A Modular socket outlet and 15/16 A Modular switch, connection etc as required ,ISO /IEC certified /Legran/Anchor roma plus /Schneider/ABB/Eq Make and Shall be approved before execution of works by SDO

Wiring for 6 Amp Plug (Computer Point) with (P+N+E) 3x2.5 Sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in Surface /Recessed conduit (Havells/Polycab/Anchor/Eq Make).

Supplying and fixing of Suitable Size GI box with Modular Plate cover and cover in front on surface or in recess, incld Providing and fixing 2 nos, 3 Pin 5/6 A modular socket outlet and 2 nos.5/6 A modular switch ,connection etc as required (For light plugs to be used in non residentail buildings), ISO/IEC certified Havells /Legrand/Anchor roma plus /Schneider /ABB/Eq.Make and shall be approved before execution of work.

Wiring for Sub main Wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/Recessed medium class PVC conduit (Havells/Polycab/Anchor /Eq Make & Shall be approved before execution of work (incld cost of conduit/Channel).2x10 Sqmm+1x10 sqmm (P+N+E) for power point Sub main in one run from main Panel to Distribution Boards.

Supply/Fixing /Testing and Commissioning of 6 Amp to 32 Amp Rating SP,240 V,*C* curve 10 k, Miniature circuit Breaker suitable for inductive load of following poles in existing MCB.DB complete with connections .(L&T/Siemens/Legrand/Havells/ABB/Eq Make).

Supply /Fixing /Testing and Commissioning of following rating,Double Pole (P+N) 240 V, *C* Curve 10 k, Miniature Circuit Breaker (MCB) in the existing MCB DB complete with Connections (L&T/Siemens/Legrand /Havells /ABB /Eq make) 40 Amp.

Supply /Fixing /Testing and Commissioning of following rating,Double Pole (P+N) 240 V, *C* Curve 10 k, Miniature Circuit Breaker (MCB) in the existing MCB DB complete with Connections (L&T/Siemens/Legrand /Havells /ABB /Eq make) 63 Amp.

Supply /Fixing /Testing and Commissioning of following rating,Double Pole (P+N) 240 V, *C* Curve 10 k, Miniature Circuit Breaker (MCB) in the existing MCB DB complete with Connections (L&T/Siemens/Legrand /Havells /ABB /Eq make) 100 Amp DP for main Supply.

Supply and fixing of MCB 12 Way Horizontal typed sheet steel Double Door Distribution Board,SPN 240 V, on surface /recess complete with tinned copper bus bar ,neutral bus bar,earth bar , din bar, interconnections ,Powder painted incld eathing etc as required (L&T /Siemens/ Legrand/ Schneider/ ABB/EQ Make).

Supply/Installation/Testing and Commissioning of 15 W LED Conceal /Surface depending on the type of ceiling (Commercial Type) light Luminary fitting round shape with Minium system Lumen efficacy of 100 lm/W with pressure Die cast Aluminium Heat Sink and P.F.>0.95,THD<10%,CCT 5700k,CRI 80.The LED With useful life of 50000 Hrs at L70.The Input voltage range shall be 150 v to 270 V .The Fixture should have in -Built surge Protection of 2k V. Crtificataion:-LM79 & LM80 test report should be from Govt approved In-House NABL lab/Government of india authorized lab.The Job includes AMC (reckoned from date of sucessful commissioning) of lighting fixtures for a period of Two years which includes replacement of fixtures of Philips/Havells /Wipro /Halonix /Eq Make.

Supply/laying /Connecting and Commissioning of 16 Sq.mm 2-core XLPE/PVC insulated and un-armoured 1.1 KV grade Aluminium Cable of Havells /Polycab /Eq Make with required size of thimbles dully crimped with Hydraulic crimping tool incld Providing and fixing of saddlers /Clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having corrugation on outer wall and plain surface inner wall conforming to IS :14930 Part-l and 2 complete with acessories for protection of 1.1 KV Grade under ground cable Directly in Ground at a depth of 50 CM incld excavation and refilling the Trench.(Material to be approved before execution).