Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAdmitted-Finance BAGH I ALI MARDAN KHAN NOWSHERA SRINAGAR J K 190011 | SRINAGAR | JAMMU AND KASHMIR | 190011 | ₹3.7 L | L1 | Admitted-Finance |
| 2 | L2₹3.8 LAdmitted-Finance SARCH GANDERBAL J K 191131 | GANDERBAL | JAMMU AND KASHMIR | 191131 | ₹3.8 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical ALAMDAR COLONY LAL BAZAR SRINAGAR J K | - | - | Rejected-Technical Disqualified |
| 4 | Rejected-Technical | - | - | Rejected-Technical Disqualified |
| Sl No | Description | Qty | Unit | M/S P.M.T INDUSTRIES L1 | NEW AHANGER ENGINEERING WORKS L2 |
|---|---|---|---|---|---|
| 1.00 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking
with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top
cover of required thickness for rolling shutters.
80x1.25 mm M.S. laths with 1.25 mm thick top cover | 41 | Sqm | 1,500 ₹61,500 | 3,800 ₹1.6 L |
| 2.00 | Cutting and removing shutter panel (7’×5’) to prepare access opening. Fabrication & fixing of MS framed access door (7’×5’) into shutter with reinforcement, hinges, and locking arrangement. Finishing works including welding, grinding, primer and enamel painting of modified portion | 1 | Job | 20,000 ₹20,000 | 10,000 ₹10,000 |
| 3.00 | Providing and fixing ball bearing for rolling shutters. | 4 | No | 8,000 ₹32,000 | 4,000 ₹16,000 |
| 4.00 | Extra for providing mechanical device chain crank operation for operating rolling shutters. Exceeding 16.80 sqm in area | 41 | sqm | 1,000 ₹41,000 | 90 ₹3,690 |
| 5.00 | Dismantling of old existing rolling shutter along with shifting to divisional stores. | 1 | Job | 15,000 ₹15,000 | 10,000 ₹10,000 |
| 6.00 | SITC of 1.5 kW (2HP), 415V, 3-phase squirrel cage induction motor, TEFC type, with reduction gearbox, torque limiter, and manual chain operation provision. | 1 | Job | 1,40,000 ₹1.4 L | 1,60,000 ₹1.6 L |
| 7.00 | SITC of Control Panels which includes MCCB 32A, 3 pole 01 No, MCB 16A, 2 pole 01 No, contactors 9A, 3 pole 01 No, thermal overload relay 4~7A, 02 No, selector switch (Auto/Manual) 01 No, push buttons 02 No, Stop Button 01 No, indicating lamps 03 No, housed in powder-coated MS enclosure, IP54. | 1 | Job | 50,000 ₹50,000 | 18,000 ₹18,000 |
| 8.00 | SITC of 4C × 6 sq.mm Cu power cable 37 Mtr, 2C × 1.5 sq.mm Cu control cable 15 Mtr, lugs, glands, conduits 148 ft, earthing with 25mm² GI strip 05 Mtr, complete with termination and testing. | 1 | Job | 15,000 ₹15,000 | 10,000 ₹10,000 |
Tender Value
₹4.3 L
EMD Value
₹8,560
Closing Date
4 Dec 2025, 5:00 pmClosed
Executive Engineer, gen Div USHP-I, Sumbal
Executive Engineer, gen Div USHP-I, Sumbal bala, Kangan
SITC of motorized rolling shutter
2025_SPDC_295147_1
GDS/04 of 2025-26
Open Tender
Metal Fabrication
60 days
Sumbal
cost of tender document
EMD
Valid registration
Valid GST
Similar work experience with completion certificate
No debarment
CA approved turn over
2 documents required · 2 mandatory
₹100
Yes
Executive Engineer, USHP-I, Sumbal
₹8,560
Yes
22 Dec 2025
14 Nov 2025
6 Dec 2025
14 Nov 2025
4 Dec 2025
14 Nov 2025
Amount
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
Cutting and removing shutter panel (7’×5’) to prepare access opening. Fabrication & fixing of MS framed access door (7’×5’) into shutter with reinforcement, hinges, and locking arrangement. Finishing works including welding, grinding, primer and enamel painting of modified portion
Providing and fixing ball bearing for rolling shutters.
Extra for providing mechanical device chain crank operation for operating rolling shutters. Exceeding 16.80 sqm in area
Dismantling of old existing rolling shutter along with shifting to divisional stores.
SITC of 1.5 kW (2HP), 415V, 3-phase squirrel cage induction motor, TEFC type, with reduction gearbox, torque limiter, and manual chain operation provision.
SITC of 4C × 6 sq.mm Cu power cable 37 Mtr, 2C × 1.5 sq.mm Cu control cable 15 Mtr, lugs, glands, conduits 148 ft, earthing with 25mm² GI strip 05 Mtr, complete with termination and testing.
NEW AHANGER ENGINEERING WORKS (BID ID -2651129)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.59 MB
BOQ_955074.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid