OUT SOURCING OF SERVICES AT WATER SUPPLY DISTRIBUTION SYSTEM AT PUMP HOUSE AND ATTENDING DAY TO DAY COMPLAINT OF WATER SUPPLY DITRIBUTION SYSTEM AT WEST PART UNDER GE EAST BAREILLY

Amount

Outsourcing of services by providing three (03) Nos skilled pipe fitter for attending day to day maintenance of external water supply complaints west part of under GE (East) Bareilly in day shift i.e. 0900 hrs to 1700 hrs excluding Sundays by maintaining all repair/rectification of leakages/blockage to water supply distribution lines by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket, nipple, repairing joints by cooking and inserting spurn yarn and run lead joints as per site requirement, attending and clearing of all no water supply complaints, carrying out washout of all external pipe lines & have to entire clean and clear water supply at user's end of west part under GE (E) Bareilly complete all as specified and as directed. Notes :- (a) Repair/Replacement of spare parts/fittings will be measured and paid under relevent items. (b) A register to be maintain by contractors rep and get it sign by users in confirmation of clear water supply of entire cantt area (location wise) of GE (W) Bareilly. (c) The contractor shall provide the one set of pipe fitter tools (comprising of following) to each pipe fitter for attending day to day complaints. (i) Pipe wrinch set comprising of 10', 12', 14', 18' 24" (ii) Spaner Set complete (iii) Die Set comprising (15mm, 20mm, 25mm, 40mm & 50mm) (iv) Hammer,Chisel and Hasksaw (v) Gaiti, Spade (Faura) and Bucket (vi) Screw Driver 15'

Providing Seven (07) Nos Mate FGM/ Helper for outsourcing of services of water supply installation in day shift i.e. 0900 hrs to 1700 hrs excluding Sundays for maintenance and cleaning and upkeep of machinery and equipment installed at water supply installation, general area cleaning and excavation to repair of pipeline and operation of distribution valves complete all as specified and directed for all pump houses and DG set installation at west part of GE (E) Area. The contractor shall provide the following tools (comprising of following) to each Mate FGM/Helperr for attending day to day complaints and cleaning of Pump house premisses (i) Gaiti, Spade (Faura) , Bucket , water pipe approx 50 Mtr , Broom, to every heplper.

Notes: - for item No 01 to 02 Contractor shall keep the following aspects in mind while quoting unit rates and rates quoted shall be deemed to be including the following: - (a) Pipe fitter should be holding ITI certificate with experience in relavent fields for operating pumps, DG sets, Chloronome Plants and bleaching dozers and Pipe Fitter with experience in maintaining all external water supply pipe lines and distribution lines . (b) Pipe fitter/FGM Mate/Helper should not be deriving pension from any Govt/semi Govt or public sector undertaking. Any disputes will be at discretion of GE and decision shall be binding on contractor. (c) Pipe fitter/Mate FGM/Helper shall posses, police verification certificate. (d) Contractor shall be responsible for safety, security and upkeep of installation as per MES standards for installation. (e) Contractor shall put up every month intearaction with Pipe fitter/mate FGM/helper register to Engr-in-Charge and GE. (f) Duty roster for one month will be prepared in advance and displayed at prominent places in installations and water supply yard to include names, shifts and residential address, contact Number etc. Operator reserve for leave/sickness etc shall also be provided and dispalyed on duty roster / register. (g) If any pipe fitter/mate FGM /Helper found absent in duty Rs 1500/- will be deducting per shift (h) Contractor shall provide pipe fitter/ helpar by providing three Skilled Pipe Fitter and seven in a day i.e. 0900h - 1700hrs and report to JE/MCM at water supply complaint cell daily basis. 1.The time limit for attending the complaints for repair to water supply pipe lines and other misc jobs - within 01 day on intimation to the contractors by the department. 2. In case the contractor fails to attend/rectify the defects within the above time limit, penalty will the imposed as Rs 500/- per day. 3. The contractor or his authorised representative shall report to concered JE/MCM or the Engineer-in-charge at 0900 hours daily on all working days to receive order/instructions of the work or regular complaints. A register shall be maintained to record all orders & instructions and their complaints and is to be signed by the contractor/his representative and the Engineer-in -Charge / JE Concered.

Supply only Medium Grade GI Elbow (ISI marked) of following sizes complete all as specified and directed. GI Elbow 15 mm

GI Elbow 20 mm

GI Elbow 25 mm

GI Elbow 40 mm

GI Elbow 50 mm

Supply only Medium Grade GI Socket (ISI marked) of following sizes complete all as specified and directed. GI Socket 15 mm

GI Socket 20 mm

GI Socket 25 mm

GI Socket 50 mm

Supply only Medium Grade GI Union (ISI marked) of following sizes complete all as specified and directed. GI Union 15 mm

GI Union 20 mm

GI Union 25 mm

GI Union 40 mm

GI Union 50 mm

Supply only Medium Grade GI Nipple (ISI marked) of following sizes complete all as specified and directed. Nipple GI 20 x 150 mm

Nipple GI 20 x 75/100 mm

Nipple GI 25 x 150 mm

Nipple GI 25 x 75/100 mm

Supply only 'D' Joint of following sizes complete all as specified and directed. D Joint of 80 mm

D Joint of 100 mm

D Joint of 150 mm

D Joint of 200 mm

Supply only Gun metal gate valve of following sizes as specified and directed. Gate valve of size 50 mm.

Gate valve of size 40 mm.

Gate valve of size 25 mm.

Gate valve of size 20 mm.

Gate valve of size 15 mm.

Supply only Medium Grade GI Socket Reducer (ISI marked) of following sizes complete all as specified and directed. GI Socket Reducer 25 -20 mm

GI Socket Reducer 20 -15 mm

GI Socket Reducer 40 -25 mm

Supply only Medium Grade GI Plug Top (ISI marked) of following sizes complete all as specified and directed. GI Plug Top 20 mm

GI Plug Top 25 mm

GI Plug Top 40 mm

GI Plug Top 50 mm

Supply only Medium Grade GI Tee (ISI marked) of following sizes complete all as specified and directed. Tee 20 mm

Tee 25 mm

Tee 40 mm

Supply only Medium Grade GI Tee (ISI marked) of following sizes complete all as specified and directed. Tee 40- 25 mm

Tee 25 -20 mm

Tee 25 -15 mm

Supply only End Plate of 150 mm bore with rubber gasket complete all as specified and directed.

Supply only gland complete all as specified and directed.

Supply only spun yarn for rectification of leakage complete all as specified and directed.

Supply only bolt and nuts different sizes (as per site requirement) complete all as specified and directed.

Supply only submersible cable flat 16 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade for fixing to submersible motor column pipe all as specified and directed.

Supply only Soda lime powder in 25 Kg vacuum packets complete all as specified and directed

M&L for cleaning of RCC Over Head Tanks capacity 1 lakh gallon removing and taking out sand, sludge and mud etc including disposal of the same at a distance not exceeding 100 mtrs from the tank,including two coats of whitewash on whole internal walls of OH Tank all as directed . NOTE:-All the safety equipments for workers working on OHT and U/G Sumps will be provided by the contactor.Cleaning of OH tank is in every 6 month or contracor is responsible to clean all OH tank two time in their contract period at same cost quoted rate.

All as per above item 20 above but capacity 50000 gallon.

All as per above item 20 above but capacity 25000/35000 gallon.

Supply only Calcium hypo chlorite 65% to 70% chlorine content in granular for water treatment complete all as specified and directed .

Supply only sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 150 mm bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, all as specified and directed.

Supply only sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 100 mm bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, all as specified and directed.

Supply only sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 200 mm bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, all as specified and directed.

Supply only Non Return Valve of 150 mm diacomplete as specified and directed. Make:

Supply only Non Return Valve of 100 mm diacomplete as specified and directed.

Supply only Non Return Valve of 200 mm diacomplete as specified and directed.

D K THUKRAL AND SONS

jay maa engineers