REPAIR TO WOODEN, STEEL ALUMINIUM JOINERY INCLUDING DOORS, WINDOWS ETC OTHER CONNECTED REPAIRING WORKS IN TECH AREA AT AF STN NALIYA

Amount

Taking down shutters of any description area not exceeding 1 Sqm each easing & adjusting and refixing in the same opening complete all as specified and directed.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each easing & adjusting and refixing in the same opening complete all as specified and directed.

Taking down Shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.

Taking down chowkhat of any description not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhat of any description exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed.

Supply and fix 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge (with out sash bars ) edges for receiving glass etc sizes of members of shutter as specified in SSR Part I section 8 clause 8.20 (a) complete all as specified and directed.

Supply and fix 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

Supply and fix 35mm thick Plain framed, panelled door shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix second class hard wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately) complete all as specified and directed.

Material and labour for 105mmx60mm pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and directed.

Material and labour for 125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

Material and labour for PCC 1:3:6, type C1 ( using 12.5 mm graded aggregates ) for chowkhat filling compelte all as specified and directed.

Supply and fix mild steel works for holdfasts conforming to Fe-290 gde E-165 complete all as specified and as directed.

Material and labour for preparation of new or old surfaces of wood and wood based materials such as ends of posts, backs of chowkats and treated with tar or coal tar black paint, area tarred exceeding 0.1 Sqm but not exceeding 0.50 Sqm each complete all as specified and directed.

Material and labour for preparation of new or old surfaces of wood and wood based small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhats and treated with tar or coal tar black paint, area tarred not exceeding 0.1 Sqm complete all as specified and directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

Forming jambs to openings (to foregoing item), including cutting, tooting and properly bonding into work, also facing, jointing and pointing to match existing work in CM 1:4 complete all as specified and directed.

Material and labour for preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Supply and fix 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply and fix 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix 150 mm long aluminum anodized tower bolts complete all as specified and directed.

Supply and fix 100 mm long aluminum anodized tower bolts complete all as specified and directed.

Supply and fix aluminium handles cast type anodized of size 125mm complete all as specified and directed.

Supply and fix aluminium handles cast type anodized of size 150mm complete all as specified and directed.

Supply and fix butt hinges of size 75 mm, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fix butt hinges of size 100 mm, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Overall length of cover plate 150mm complete all as specified and directed.

Supply and fix in repairs aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminiumalloy and fixed lenght of bolt 250mm complete all as specified and directed.

Supply and fix in repairs 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix in repairs Aluminum anodized tower bolts 150mm complete all as specified and directed.length.

Supply and fix in repairs aluminium handles cast type anodized 150mm size complete all as specified and directed.

Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150mm complete all as specified and directed.

Material and labour for hacking out old broken sheet glass and fixing 3 mm sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm complete all as specified and directed.

Material and labour for hacking out old broken figured glass and fixing 3 mm figured glass pin head type, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm complete all as specified and directed.

Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Supply and fix in repairs harrison rails, aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and fix in repairs 25mm dia stainless steel curtain rod cut to length and fixed with suitable bracket complete all as directed.(bracket should be paid separately).

Supply and fix in repairs bracket suitable for 25mm dia curtain rod with steel screw/wooden plug complete all as directed.

Repairs to aluminium doors by cleaning, greasing and easing for smooth functioning including replacement of unserviceable fittings complete all as specified & as directed. Note:-Spare parts if required shall be measured and paid separately under respective items.

All as per serial item number 40.00 but for windows of any size complete all as specified and directed.

Supply and fix powder coated aluminium, three track sliding window frame of section size 92.00x 31.75x1.3mm comprising of one number of fly proof shutter and two numbers of glazed shutter frames of section size 40x18x1.3mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement all as specified and directed. Notes:- (i) Glass filling in panels of window and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item. (ii) Aluminium alloy wire cloth in panels of gauzed shutter shall be 0.45mm nominal dia and avarage width of aperture 1.40mm, fixed with aluminium wire staples,. (iii) Glass filling in panels of glazed shutter shall be 4mm thick tinted sheet glass.

Supply and fix in repairs aluminum anodised grill of 7 mm dia rod square, rectangular, circular or similar tupe of shape aperture not exc 7.00cm in length or width fixed with H or F channel 38 mm x 12 mm x 1.30 mm complete all as specified and directed.

Supply and fix aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator ,partially glazed and partially louvers,outer frame & mullion on fabricated with aluminium section of size 82.50mmx38.00mmx1.70mm (Cat No. 20036),half portion glazed with 4mm thick frosted glass including rubber beading,& glazing clip,half portion louvers of 80mm wide & 4mm thick frosted glass including aluminium patti including fixing fixing of S.S wire gauge of .36mm dia and 1.40mm width of aperature with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fittings & fixure and fixed in position complete all as specified and as directed by engr-in-charge. Note:- Section number given above are of make jindal, contractor may use similiar section of other make mentioned in CA.

Supply and fix anodised aluminium powder coated frame of standerd section for doors, windows, ventilators and partitions with double rebates including joining cleat for fixing complete all as specified and directed.

Material and labour for powder coated aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, hinge type B-21100mm long (3 Nos), suitable handle (2 Nos.) complete all as specified. Note:- Glass / Wiremesh should be measured seperately.

Material and labour for sheet glass 4.8 mm thick, ordinalry quality and glazing with aluminium beeds in square exceeding 0.50 sqm in each pane complete all as specified and as directed.

Material and labour for 12mm thick prelaminated particle board, interiror grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber work all complete as specifed and directed.

Supply and fix in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Supply and fix in repairs aluminium mortice lock of size 100 mm, vertical type, 4 levers complete all as specified and directed.

S&F in repairs aluminium extruded section body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified and as directed.

Material and labour for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces with water proofing compound @ 3 % of weight of cement and finished fair and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound will be measured and paid for seperately as supply only.

Supply only integral water proofing compound

Material and labour for 15mm thick rendering in CM 1:6 on brick work or concrete surfaces finished fair and smooth without using extra cement complete all as specified and as directed.

Material and labour for 5mm thick rendering in CM 1:3 on ceiling surface finished fair and smooth without using extra cement complete all as specified and as directed.

Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces complete all as specified and directed.

Material and labour for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of new surfaces of walls (upto 15 metre height) and applying two coats of distemper oil emulsion over a coat of primer including 3mm thick wall care putty after applying of primer complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and as directed.

Dismantling structural steel work including doors, gates, rolling shutters, etc. but excluding framed truss etc complete all as specified and directed.

Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming Fe 410 -W (Gde- E- 250) quality- AFe complete all as specified and directed.

Supply and fix in repair mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, welded and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Material and labour for preparation of new steel surfaces exceeding 10 cm width or girth and applying two coats of sythentic enamel paint over one coat of red oxide zinc primer complete all as specified and directed.

Material and labour for tempered or toughened glass 12 mm thickness used for preparing balcony doors, windows, bathroom doors, and in weapon storage area with all necessary fittings complete all as specified and directed.

Dismantling wooden boarding, any description, fixed in any position with screws complete all as specified and directed .

Material and labour for 18mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and pattern complete all as specified and directed.

All as per serial item number 67.00 here-in-before but 12 mm thick plywood complete all as specified and directed.

All as per serial item number 67.00 here-in-before but 6 mm thick plywood complete all as specified and directed.

Material and labour for 0.90mm thick decorative laminate type – I of surface finish (colour & pattern as approved) fixed with approved adhesive as per manufacturer’s instruction finished to approved size for working table complete all as specified and directed.

Material and labour for first class hard wood plain cover fillets square, rectangular or triangular in section, sectional area not exceeding 6 Sqcmn, bull nosed, splayed chamfered or rounded on one edge or face complete all as specified and directed.

Supply and fix butt hinges of size 75 mm, extruded brass, with mild steel hinge pin, bright polished and fixed, type D-11 complete all as specified and directed.

Supply and fix extruded brass handles of size 100 mm, fabricated type polished complete all as specified and directed.

TAKHUBHA KANUBHA JADEJA