J&K

Active

Works

Machineries/ Mechanical Engg Items

Empanelment of Firms for replacement/rewinding of coils of various types and capacities of submersible / induction motors / monosubmerible motors installed at various Tubewells/ Dugwells/ pumping stations in Jal Shakti (PHE) Division Samba

Public Health Engineering Department

Samba, Jammu And Kashmir

Amount: Refer DocsCloses: 28 Sept 202621 Sept 2026Due today

Timeline

Published7 Sept 2026
Closes28 Sept 202621 Sept 2026
Bid Opening29 Sept 202622 Sept 2026

Corrigenda

Corrigendum

1 updatesLatest on 22 Sept 2026Submission Ends:21 Sept 202628 Sept 2026

Date changes

Download Ends21 Sept 202628 Sept 2026Submission Ends21 Sept 202628 Sept 2026Bid Opening22 Sept 202629 Sept 2026

Tender Value

Refer Docs

EMD Value

₹20,000

Closing Date

28 Sept 2026, 4:00 pmDue today

Tender Inviting Organisation

Name

Executive Engineer Jal Shakti PHE Division Samba

Address

Executive Engineer Jal Shakti PHE Division Samba

Work Description

Please refer BOQ

Tender Information

Tender ID

2026_PHE_323754_2

Reference Number

e-NIT No.PHES/29 of 2026-27 dated. 07.09.2026

Tender Type

Open Tender

Product Category

Machineries/ Mechanical Engg Items

Form of Contract

Empanelment

Period of Work

190 days

Location

Samba

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer e- NIT/ tender documents

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

Requiredscanned copies of all required/ related documents as per e-NIT/tender documents (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,000

Tender Fee Payable To

Executive Engineer Jal Shakti PHE Division Samba

EMD Fee Amount

₹20,000

Important Dates

Last Activity

28 Sept 2026

Published

7 Sept 2026

Bid Opening

29 Sept 2026

Download Starts

7 Sept 2026

Download Ends

28 Sept 2026

Submission Starts

7 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (64 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Rewinding of Submersible Motors along with providing & fitting of submersible cable leads, each of length 1 mtr. and of suitable specification. :Complete rewinding of 5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-
2	Complete rewinding of 7.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-
3	Complete rewinding of 10 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-
4	Complete rewinding of 12.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-
5	Complete rewinding of 15 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-
6	Complete rewinding of 17.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-
7	Complete rewinding of 20 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-
8	Complete rewinding of 22.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-
9	Complete rewinding of 25 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-
10	Complete rewinding of 27.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.	1	Job	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.51 MB

Work Item Documents

BOQ_1090789.xls

BOQ • 0.34 MB

Corrigendum Documents

CorrigendumemEmpanelment29Samba.pdf

PDF • 0.28 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Rewinding of Submersible Motors along with providing & fitting of submersible cable leads, each of length 1 mtr. and of suitable specification. :Complete rewinding of 5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job

Complete rewinding of 7.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job

Complete rewinding of 10 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job

Complete rewinding of 12.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job

Complete rewinding of 15 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job

Complete rewinding of 17.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job

Complete rewinding of 20 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job

Complete rewinding of 22.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job

Complete rewinding of 25 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job

Complete rewinding of 27.5 HP submersible motor. The job includes repairs to submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of studs with nuts and T-bolts (08 nos.) in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Job