PROVN OF GI CHAIN LINK SECURITY FENCING AT FASF AT BHUJ MIL STN UNDER GE ARMY BHUJ

Amount

M & L for Site Clearance and cutting to shurbs, vegetation etc and disposal of rubbish up to a distance of 50m outside the periphery of area complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, wells,cesspits, man holes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/ loose complete all as specified and directed.

M & L for cement concrete in foundations filling and mass concrete type B2 1:2:4 (40 mm graded aggregate) complete all as specified and directed.

M/L PCC 1:4:8 type D2 using 40mm graded Cement concrete in foundations,filling and mass concrete complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry (Type C1, 1:3:6, 20mm aggregate) with solid blocks, exc. 10cm in width and setting in mortar (1:4) complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:4) and finished even and smooth without using extra cement ,including threecoat of white wash complete all as specified and directed.

Returning ,filling in ,including ,spreading , levelling , watering and well ramming in layers n, exc, 15 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M/L round bars 10mm dia and over cut to length, bent to shape including cranking, binding spirally for hooping for columns hooking ends and binding with end including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply chain link mild steel galvanized fencing of mesh size 75mm and Nominal dia of mesh wire not less than 3.15 mm complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh size and type to any type of standard rails, straining bolt etc complete all as specified and directed.

S&F mild steel (5 to 10mm dia of neck) screw bolt (machine made) exc 5cm but not exc 10 cm in length with hexagonal or square head at one end and screwed the other each screw end to be fitted with washer 3 mm thick mild steel complete all as specified and directed.

S&F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M & L Preparation of new steel Surfaces of any description, n.exc10cm in width or girth and applying two coat of synthetic enamel paints over and including a coat of red oxide primer. when unconnected with other painting or when painted in a different tin complete all as specified and directed.

M & L Preparation of new steel surface exc 10 cm width and girth and applying two coat of synthetic enamel paints over and including a coat of red oxide primer complete all as specified and directed.

machine vision plus (BID ID -3173026)

Sanjay Enterprise (BID ID -3173910)

MARA CONSTRUCTION CO (BID ID -3171099)

M/S HARI CONSTRUCTION (BID ID -3178037)

SAPPERS CONSTRUCTION (BID ID -3171693)

MAA PUNAGRI ENTERPRISE (BID ID -3177322)