Scaffolding to the coconut palm

Amount

Laying and Jointing PVC Pipe. Heading

Providing and fixing Additional double scaffolding system (cup lock type) to the existing Rows of coconut palm 20Mx1.2M and 2 nos of cross raws of 5Mx1.2M for inspection purpose) up to seven story height including hand rails with a height of one Meter made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical and cross tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps in the scaffolding for inspection platform for research work of coconut plam etc. and maintaining it in a serviceable condition for one year duration as directed. The scaffolding system shall be stiffened with bracings, runners, connection etc wherever required for inspection of work at required locations for coconuts palm inspection complete as per directions and approval of Scientist in charge .The elevation area of the scaffolding shall be measured for payment purpose and cost of M.S Pipe clamps and all material related to scaffolding work are included. . detailed lay out is attached as annex -1 ( for foundation ,Earth work And concrete, payment will paid separately excluding clamp

Providing and fixing G.I Work in built up section ( square or rectangular hollow tube etc) platform frame work etc using Approved section The rate shall include cost and conveyance of all materials, fabrication, cutting welding grinding, drilling, hoisting transportation etc. complete as directed G.I tubes

Providing and fixing of 3 mm thick M.S chequered plate in landing plat form by welding revetting or bolting etc

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work