Memo No. 3450 /NKDA/Engg/EE(R/B)/193/2025 - Serial 02- Certain Miscellaneous repair in CC-2

Amount

Stripping off worn out plaster and raking out joints of walls,celings etc.up to any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster(towall, floor, ceilinge tc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar

Rendering the Surface of walls and ceiling withWhite Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)

Applying two coats of Acrylic Distemper toi nterior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc includ1ng using of approved puty elc. on the surface, if necessary On steel or other metal surface |With super gloss (hi-gloss) l(v) Two coats (with any shade except white)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size excluding shuttering and reinfor cement, if any, in ground floor as per relevant IS codes Pakur Variety

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc Floor With Sand Cement Mortar (1:4) 20 mm thick & 2mm thick cement slurry at back side of tiles using cement @2.91 Kg /Sq.m & joint filling using white cement slurry @ 0.20kg /Sq.m. (a) Area of each tile upto 0.09 Sq.m Other than Coloured decorative inclfuding white

Resetting old glazed porcelain tiles in 20 mm thick cement mortar (1:4) including 4No sofkey stone(10mm) fixedwith adhesive of approved quality & 2 mm thick cement slurry using cement @2.91kg/Sq.mat the back of tiles and finishing joints with white cement & colouring oxide [if required] to match the colour of tiles over application [email protected]/ Sq.m below cement mortar including dismantling the old mortar etc

18mm. to22mm. thick, kota stone slab set in 20 mm thick (avg) cementmortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding &polishing as per direction of Engineer-in-charge to match with the existing work. [Slurry for bedding @4.4kg/ Sq.m and pointing @ 2.0 kg/ Sq.m]

Applying one coate of Exterior grade Acrylic primer in ground floor of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. in Ground floor (Two Coat)

BANAMALI ENTERPRISES (BID ID -6489928)

TANCON ENGINEERING (BID ID -6485770)