Implementation of National e-Vidhan Application (NeVA) End-to-End Digital Transformation of Legislative Assembly.

SITC of Digital combi Conference Control unit / Server units. Units must be Dante enable (must have minimum 2 Dante/ Network Ports) inbuilt from factory with Integrated dynamics processor with programmable threshold, ratio, attack, and release of noise gate, AGC and limiter functions/ DSP with adaptive acoustic feedback, echo cancellation, parametric equalizer ( Dante, dynamic processor can be built to the controller/ server or integrated power supply unit) Unit Should have minimum 1 x Power Connectors, minimum 3 x Conference Network Ports or more than 1 x LAN Port, 1 x Balanced XLR audio input or more , 1 x Balanced XLR audio output or more, must be a capable of automatic or manual take-over of the Controller/Server by a spare controller units in case one would become inactive ,in built or external Recording capabilities, Audio Routing, Network Monitoring, Built-in diagnostics application and camera control capability., The Controller should be work on shielded network (non-proprietary) the above ports features can be complied through controller or integrated power supply. Controller Unit should support Voting & Interpretation. 19" Rack Mountable. Controller and server units should be from same OEM. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR 144 (xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site.

SITC of integrated Power supply cum controller for conference unit with On/Off rocker/ switch with built-in indicator. It should have 48 V, LED indicator or better, Power good TTL output/ LED indicator provided on a sub D9 connector or better RJ 45 ports or Six 3-pin detachable Phoenix connectors are provided at the rear of the Power supply 1U or more to branch off the 48 V. 1U, 19" rack module, Mains power input: 100-240 VAC 60/50 Hz Output voltage: 48 VDC, Protection Short circuit: Overload, Temperature, Over voltage, Technology: Switched Mode Power Supply Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144(xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site.

SITC of one/two or more upstream ports towards the Central Unit. 2 or more powered downstream ports towards the network/ conference field devices. Network Extender cum change over unit extended powering unit supports redundant loop cabling. It shall be possible to daisy chain and loop several network extenders on the conference controller network. It shall be possible to loop Chairman/Delegate units between several network extenders to create redundancy on a network extender level, The Network Extender cum change over unit is powered via the external power unit. Conference OS software application detects possible failure and starts the switch over process accordingly by the operator commands. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144(xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site.

SITC of Integrated Flush mount Delegate conference unit with Speaker Built-In and with removable microphone capability, supported for Voting and simultaneous Interpretation, microphone push button with integrated LED, Physical / Capacitive 5 clear voting buttons with LED indicators. Should have in build with RFID/ NFC card reader for identification and authentication, Channels selector button with a OLED/ LCD display and headphone volume control, Built-in high- quality loudspeaker, minimum 1W or as per OEM, built in speaker frequency response: 200-15,000 Hz or better, Speaker shall automatically muted/ active when the microphone is active, to prevent acoustic feedback available in custom colours dimension, finishes, construction: steel / metal or as pr OEM, only 3.5 mm stereo jack sockets for headphone connectivity. “Connectivity: › 2 x RJ 45 port (IN/OUT). Loop through, daisy-chain cabling (non-proprietary)."USB-C or mini-USB or mini din, Push & Lock/ screw socket to connect the detachable microphone. "Microphone Input: › Dynamic range: > 90 dB or better › THD: 0.1% or better". Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144 (xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site.

SITC of Integrated Flush mount Chairman conference unit with Speaker Built-In and with removable microphone capability, supported for Voting and simultaneous Interpretation, microphone push button with integrated LED , Physical / Capacitive 5 clear voting buttons with LED indicators. Should have in build RFID/NFC card reader for identification and authentication, Channels selector button with a OLED/LCD display and headphone volume control, Built-in high-quality loudspeaker, minimum 1W or as per OEM, built in speaker frequency response: 200-15,000 Hz or better, Speaker shall automatically muted/ Active when the microphone is active, to prevent acoustic feedback available in custom colours dimension, finishes, construction: streel / metal or as pr OEM, only 3.5 mm stereo jack sockets for headphone connectivity. “Connectivity: 2 x RJ 45 port (IN/OUT ). › Loop through, daisy-chain cabling (non-proprietary)."USB-C Push/ mincon/ mini din & Lock/ screw socket to connect the detachable microphone. "Microphone Input: › Dynamic range : > 90 dB or better › THD: 0.1% or better". Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144 (xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site.

SITC of Gooseneck Microphone 360 MM or above or as per site requirement must have a single/ dual flex gooseneck microphone (flexible top and lower sections) is equipped with USB C-based / mini-USB/ mini din push and lock/screw connector Polar Pattern: Cardioid/ Uni directional or better Shielded microphone, immune to mobile phone interference. Transducer principle: Back electret (condenser). Frequency response: 125 to 15000 Hz or better. Sensitivity @ 1 kHz/ Nominal input level : -43 dBV/Pa/ 85 dB SPL or better. Maximum SPL @ 1 kHz : 110 dB SPL or better. Signal-to-noise ratio/ Equivalent noise : 15 dB or better. Dynamic range : 90 dB or better. Microphone LED ring configurable with selection of RED and Green colour USB-C/ minicon/ mini din -based microphone connector. Connection: Push & screw /Lock. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144(xi) guidelines of purchase manual complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site.

SITC of conference software should offer all-in-one software package that simplifies room setup and meeting control. Easy step by step configuration wizard and Room layout configuration for the technician "Roles for meeting control: › Operator › Chairperson › Signage Specify available controls for each role and Capability to protect roles with password" Create a single meeting template including: › Title › Delegates and seating › Optional badge configuration › Optional external recording of the meeting audio Start a meeting from the template or a new meeting It should Manage speakers from room layout, Manage the speaker list, Manage request list with drag and drop re-ordering capability. It should Start a voting session, Voting question, 2 or 3 options for voting and Public or secret voting "It should have Signage for Meeting view with Room layout, speaker list and request list, Voting view with results screen, Dynamically switch between meeting and voting view when voting starts / stops." Consult or save up to 20 meeting reports, The reports contain meeting participants, the recording (if available) and timestamped voting items with overall and individual vote results Voting results are visualized in the operator, and chairperson screen, but also the signage screen will toggle to visualize the voting results Whenever a need arises a voting can be started on the fly. The voting gets a description, and it can be defined if it is a public or secret vote. In a meeting template participants can be added by simply typing their name and adding them to their assigned seat. Additionally, an RF-ID card can be assigned, allowing participants to identify themselves by logging into any conference device in the room.

SITC of Light weight headphone unit "Transducer principle: Dynamic as per OEM Load rating: 20 mW or better Impedance: 32 Ω or more, Sensitivity: 94 dB/mW(+ 3 dB at 1 kHz) or better, as per OEM Frequency range 35/50-15,000 Hz or better, Connector: 3.5 mm stereo jack. complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site.

Supply & Laying of Conference Cable 2 Mtr or as per OEM recommended Cat6 shielded cable with high quality STP end connectors complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site.