Kerala

To Be Opened

Works

Agricultural or Forestry

GENERAL-ESTIMATE FOR THE COST OF RENOVATION QUARTERS NO ND C1 AT BENGALW KUNNU , CHANDAKKUNNU UNDER PANAYAMGODE SECTION , NILAMBUR RANGE 2026-27-ND C1 AT BENGALW KUNNU-General Civil Work

Forest Department

Nilambur | Malappuram, Kerala

Amount: ₹1.8 LCloses: 3 Aug 2026Closed

Timeline

Published27 Jul 2026
Closed3 Aug 2026
Bid Opening5 Aug 2026

Tender Value

₹1.8 L

EMD Value

₹4,600

Closing Date

3 Aug 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

DIVISIONAL FOREST OFFICE NILAMBUR NORTH

Address

DIVISIONAL FOREST OFFICE NILAMBUR NORTH

Work Description

GENERAL-Estimate for the cost of Star Trees GENERAL-ESTIMATE FOR THE COST OF RENOVATION QUARTERS NO ND C1 AT BENGALW KUNNU , CHANDAKKUNNU UNDER PANAYAMGODE SECTION , NILAMBUR RANGE 2026-27-ND C1 AT BENGALW KUNNU-General Civil Work

Tender Information

Tender ID

2026_FD_862715_3

Reference Number

KFDDO/45283/26/DFONLBRN/D

Tender Type

Open Tender

Product Category

Agricultural or Forestry

Form of Contract

Percentage

Location

Nilambur

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical/Finance

RequiredPreliminary Agreement (.pdf)

RequiredBoq (.xls)

RequiredRegistration Certificate (.pdf)

RequiredGst (.pdf)

RequiredPan card (.pdf)

Fee & Financial Details

Tender Fee Amount

₹400

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹4,600

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

27 Jul 2026

Published

27 Jul 2026

Bid Opening

5 Aug 2026

Download Starts

27 Jul 2026

Download Ends

3 Aug 2026

Submission Starts

27 Jul 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (3 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Renovation
1.01	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	-	KG	-	-
1.02	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required	-	M2	1	-
1.03	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Flashings / Aprons (Upto 600 mm)	-	M	1	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.34 MB

Work Item Documents

BOQ_1459236.xls

BOQ • 0.27 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Renovation
1.01	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	-	KG	-	-
1.02	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required	-	M2	1	-
1.03	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Flashings / Aprons (Upto 600 mm)	-	M	1	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Renovation

1.01

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

1.02

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

1.03

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Flashings / Aprons (Upto 600 mm)