Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹7.0 Cr
EMD Value
₹13.9 L
Closing Date
2 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ENGINEERIN
14 conditions · 3 needing a document upload
"The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of ""total contractual payments"" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB (as per standard tender document), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (As per Rly. Board letter No. 2022/CE-I/CT/GCC- 2022/Policy dated 14.07.2022, advanced correction slip No. 1)."
Tenders costing more than 50.00 Lakhs:- As a proof of experience/competency, The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Similar Nature of Work: Any civil work other than track work.
16 conditions · 5 needing a document upload
Tenderers are required to upload self-attested/digitally signed scanned copy of eligibility documents such as mandatory credentials, affidavit, partnership deed, power of attorney, PAN, GST/TIN Firm/Company registration/MOA/MOU/AOA etc.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. (Annexure-VII-A).
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i) A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of bids. (iii) Non submission of scanned copy of Bank Guarantee with the bid on e- tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv) The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v) The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected (vi) The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii) The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii) If the envelope is not sealed and marked as instructed above, the Authority assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder. (Annexure-VII-A, as per attached standard tender documents & Annexure-VI-A of GCC-2022).
Tenderers are advised to submit self-attested/digitally signed copy of Bank particulars i.e. Bank name, Bank Account No. IFSC code as per Annexure-XII of Tender Document for any smooth transactions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are not required to submit uploaded Tender document which has uploaded for the information & knowledge of Tenderers. (2) Tenderers are advised to check the Tender Schedule Items, conditions/Special conditions/eligibility criteria etc. before quoting the rates for E-Tendering. (3) No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenders shall be treated as NULL & Void. (Authority: - HQ/NR Letter No. 74- W/0/Pt. XXV/WA/Loose Dated: 07.04.2015.
Tenderers are advised to make workers wage/salary payment through workers bank account to ensure making payment during the wage period in Railway's Shramik Kalyan portal.
All latest and up to date Correction slips of General Conditions of Contract (GCC)-April-2022 and Standard Tender Document (STD)-2022 Shall be applicable.
Soft Up gradation/Improvement of Shimla Railway Station under Amrit Bharat Station Scheme on KLK-SML Section under ADEN/SML.
OT-210-UMB-2026-27~NR
OT-210-UMB-2026-27
Open
Works - General
12 Months
Ambala, Haryana
₹0
₹13.9 L
10 Nov 2026
10 Nov 2026
18 Nov 2026
217 items across 2 schedules · ₹6,28,50,996.62 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 90 | 187.24 | 16,851.6 |
| 2 | Every additional lead of 50m or part thereof beyond1st 50 m upto 9 such additional lead | cum- lead | 540 | 40.77 | 22,015.8 |
| 3 | Cost of carriage including loading, unloading & stacking for first 50 metres | Tonne | 8 | 291.14 | 2,329.12 |
| 4 | Every additional lead of 50m or part thereof beyond1st 50 m upto 9 such additional lead | tonne- lead | 40 | 42.72 | 1,708.8 |
| 5 | Ordinary rock | cum | 300 | 412.95 | 1,23,885 |
| 6 | Pipes, cables etc, not exceeding 80 mm dia. | Metre | 400 | 255.55 | 1,02,220 |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 210 | 253.95 | 53,329.5 |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 40 | 7,365.15 | 2,94,606 |
| 9 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 90 | 6,326.05 | 5,69,344.5 |
| 10 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 40 | 9,375.2 | 3,75,008 |
| 11 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 70 | 370.85 | 25,959.5 |
| 12 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. | Sqm | 40 | 113.85 | 4,554 |
| 13 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand(Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | Sqm | 120 | 681.65 | 81,798 |
| 14 | cum | 20 | 10,719.3 | 2,14,386 | |
| 15 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 80 | 307.95 | 24,636 |
| 16 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | Sqm | 50 | 669.55 | 33,477.5 |
| 17 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 150 | 766.55 | 1,14,982.5 |
| 18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 100 | 608.35 | 60,835 |
| 19 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 150 | 804.25 | 1,20,637.5 |
| 20 | Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like | Sqm | 60 | 307.95 | 18,477 |
| 21 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 15 | 814.95 | 12,224.25 |
| 22 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 12 | 9,673.5 | 1,16,082 |
| 23 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg 6000 | — | 89.65 | 5,37,900 |
| 24 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. | Metre | 50 | 64.7 | 3,235 |
| 25 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 20 | 8,683.8 | 1,73,676 |
| 26 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 40 | 10,306.2 | 4,12,248 |
| 27 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 20 | 6,658.25 | 1,33,165 |
| 28 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 30 | 8,512.1 | 2,55,363 |
| 29 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 200 | 1,018.05 | 2,03,610 |
| 30 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 30 | 6,653.45 | 1,99,603.5 |
| 31 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 50 | 8,275.7 | 4,13,785 |
| 32 | Area of slab upto 0.50 sqm | Sqm | 24 | 4,679.35 | 1,12,304.4 |
| 33 | Area of slab over 0.50 sqm | Sqm | 24 | 4,425.35 | 1,06,208.4 |
| 34 | Metre | 70 | 475.55 | 33,288.5 | |
| 35 | Each | 15 | 808.15 | 12,122.25 | |
| 36 | Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble | Sqm | 20 | 2,707.8 | 54,156 |
| 37 | Granite of any colour and shade | Sqm | 300 | 3,105.5 | 9,31,650 |
| 38 | Kiln seasoned and chemically treated hollock wood | cum | 1 | 1,63,814.1 | 1,63,814.1 |
| 39 | Decorative veneer facings approved manufacture | Sqm | 50 | 1,645.8 | 82,290 |
| 40 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 700 | 1,063.45 | 7,44,415 |
| 41 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | Sqm | 100 | 4,474.2 | 4,47,420 |
| 42 | Second class teak wood | cum | 6 | 1,31,576.95 | 7,89,461.7 |
| 43 | Kiln seasoned and chemically treated hollock wood | cum | 20 | 64,332.2 | 12,86,644 |
| 44 | Second class teak wood | cum | 2 | 13,157.8 | 26,315.6 |
| 45 | 35 mm thick shutters | Sqm | 180 | 3,704.45 | 6,66,801 |
| 46 | Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type | Sqm | 100 | 2,400.4 | 2,40,040 |
| 47 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | Sqm | 60 | 2,231.2 | 1,33,872 |
| 48 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 40 | 3,086.1 | 1,23,444 |
| 49 | 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws | Sqm | 80 | 2,512.35 | 2,00,988 |
| 50 | Second class teak wood | Sqm | 130 | 4,342.3 | 5,64,499 |
| 51 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. | Metre | 100 | 511.55 | 51,155 |
| 52 | 25 mm dia (heavy type) | Metre | 100 | 159.35 | 15,935 |
| 53 | Fixed to steel windows by welding | Kg | 300 | 181 | 54,300 |
| 54 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg 1600 | — | 197.7 | 3,16,320 |
| 55 | Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6mm thick for windows etc. including 62 x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. | Sqm | 70 | 1,277.65 | 89,435.5 |
| 56 | With 2nd class teak wood beading 62X19 mm | Sqm | 60 | 1,164.9 | 69,894 |
| 57 | 250x16 mm | Each | 100 | 165.9 | 16,590 |
| 58 | 250 mm weighing not less than 280 gms | Each | 80 | 51.9 | 4,152 |
| 59 | 150x10 mm | Each | 56 | 232.3 | 13,008.8 |
| 60 | 125 mm | Each | 40 | 205.1 | 8,204 |
| 61 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 30 | 1,025.65 | 30,769.5 |
| 62 | 250x16 mm | Each | 56 | 234.9 | 13,154.4 |
| 63 | 200x10 mm | Each | 24 | 90.8 | 2,179.2 |
| 64 | 125 mm | Each | 192 | 60.05 | 11,529.6 |
| 65 | Twin rubber stopper | Each | 80 | 62.25 | 4,980 |
| 66 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. | Metre | 400 | 85.6 | 34,240 |
| 67 | Triple strip vertical type | Each | 50 | 44.85 | 2,242.5 |
| 68 | Fire retardant plywood conforming to IS: 5509 | Sqm | 100 | 2,338.75 | 2,33,875 |
| 69 | 1.5 mm thick | Sqm | 201 | 890.55 | 1,79,000.55 |
| 70 | 18 mm thick | Sqm | 20 | 1,215.75 | 24,315 |
| 71 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in- charge.(Payment of providing and fixing auto closing hinges shall be paid separately) | Sqm | 16 | 2,563.75 | 41,020 |
| 72 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. | Sqm | 100 | 2,339.6 | 2,33,960 |
| 73 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg 100000 | — | 93.05 | 93,05,000 |
| 74 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg 100000 | — | 111.95 | 1,11,95,000 |
| 75 | Electric resistance or induction butt welded tubes | Kg 3000 | — | 140.85 | 4,22,550 |
| 76 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | Kg 57000 | — | 102.25 | 58,28,250 |
| 77 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg 3000 | — | 142.3 | 4,26,900 |
| 78 | M.S. tube | Kg | 500 | 157.15 | 78,575 |
| 79 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg 3500 | — | 612.25 | 21,42,875 |
| 80 | 18 mm thick | Sqm | 140 | 570.75 | 79,905 |
| 81 | Size of Tile 600 x 600 mm | Sqm | 850 | 1,286.6 | 10,93,610 |
| 82 | Size of Tile 600 x 600 mm | Sqm | 200 | 1,311.05 | 2,62,210 |
| 83 | Size of Tile 600x600 mm | Sqm | 950 | 258.65 | 2,45,717.5 |
| 84 | Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. | Sqm | 950 | -11.7 | -11,115 |
| 85 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 200 | 2,589.9 | 5,17,980 |
| 86 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 750 | 3,908.8 | 29,31,600 |
| 87 | 0.63 mm thick with zinc coating not less than 275 gm/ sqm | Sqm 3200 | — | 978 | 31,29,600 |
| 88 | 0.63 mm thick with zinc coating not less than 275 gm/sqm | Metre | 500 | 752.45 | 3,76,225 |
| 89 | Flat surfaces | Sqm | 900 | 1,421.25 | 12,79,125 |
| 90 | Curved surfaces | Sqm | 30 | 1,708.05 | 51,241.5 |
| 91 | Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling. | Sqm | 70 | 485.75 | 34,002.5 |
| 92 | 110 mm diameter | Metre | 600 | 319.75 | 1,91,850 |
| 93 | 110x110x110 mm | Each | 40 | 205.45 | 8,218 |
| 94 | 110 mm bend | Each | 24 | 132 | 3,168 |
| 95 | 110 mm | Each | 40 | 309.5 | 12,380 |
| 96 | 12.5 mm thick tapered edge gypsum moisture resistant board | Sqm | 200 | 1,300.5 | 2,60,100 |
| 97 | Ridges plain (500 - 600mm) | Metre | 200 | 450.6 | 90,120 |
| 98 | Flashings/ Aprons.( Upto 600 mm) | Metre | 300 | 412.85 | 1,23,855 |
| 99 | Gutter (600 mm over all girth) | Metre | 200 | 1,110.6 | 2,22,120 |
| 100 | 1:6 (1 cement: 6 coarse sand) | Sqm 1000 | — | 294.35 | 2,94,350 |
| 101 | 1:6 (1 cement: 6 coarse sand) | Sqm | 500 | 339.1 | 1,69,550 |
| 102 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm 1500 | — | 214.3 | 3,21,450 |
| 103 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm 1500 | — | 162.55 | 2,43,825 |
| 104 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | Sqm | 100 | 245 | 24,500 |
| 105 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm 2800 | — | 158.95 | 4,45,060 |
| 106 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 800 | 140.05 | 1,12,040 |
| 107 | New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | Sqm 6840 | — | 150.2 | 10,27,368 |
| 108 | Two or more coats on new work | Sqm | 800 | 131.45 | 1,05,160 |
| 109 | Two or more coats on new work | Sqm | 48 | 115.1 | 5,524.8 |
| 110 | Two or more coats on new works including a coat of wood filler | Sqm | 220 | 368.3 | 81,026 |
| 111 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 800 | 123.85 | 99,080 |
| 112 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm 2000 | — | 20.85 | 41,700 |
| 113 | Old work (one or more coats) | Sqm | 500 | 77.2 | 38,600 |
| 114 | One or more coats on old work | Sqm 1500 | — | 86.55 | 1,29,825 |
| 115 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) | Sqm | 100 | 1,156.55 | 1,15,655 |
| 116 | With cement mortar 1:4 (1 cement : 4 fine sand) | Sqm | 400 | 462.3 | 1,84,920 |
| 117 | Door chowkhats | Each | 15 | 1,505.3 | 22,579.5 |
| 118 | Window chowkhats | Each | 30 | 948.05 | 28,441.5 |
| 119 | Clerestory window chowkhats | Each | 8 | 712.85 | 5,702.8 |
| 120 | 125 mm | Each | 40 | 465.1 | 18,604 |
| 121 | 100 mm | Each | 20 | 412.95 | 8,259 |
| 122 | Dismantling W.C . Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. | Each | 20 | 110.7 | 2,214 |
| 123 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | cum | 5 | 1,239.6 | 6,198 |
| 124 | In cement mortar | cum | 2 | 1,698.45 | 3,396.9 |
| 125 | Of area 3 sq. metres and below | Each | 200 | 302.7 | 60,540 |
| 126 | Of area 3 sq. metres and below | Each | 15 | 118.3 | 1,774.5 |
| 127 | Of area beyond 3 sq. metres | Each | 5 | 155.75 | 778.75 |
| 128 | For thickness of tiles 10 mm to 25 mm | Sqm | 900 | 60.5 | 54,450 |
| 129 | G.S. Sheet | Sqm 3000 | — | 136 | 4,08,000 |
| 130 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | Sqm 2000 | — | 46.5 | 93,000 |
| 131 | 100 mm dia pipe | Metre | 100 | 64.3 | 6,430 |
| 132 | 15 mm to 40 mm nominal bore | Metre | 200 | 124.1 | 24,820 |
| 133 | Up to 150 mm diameter | Metre | 50 | 340.7 | 17,035 |
| 134 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. | Each | 17 | 744.6 | 12,658.2 |
| 135 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 100 | 45.05 | 4,505 |
| 136 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 4 | 219.35 | 877.4 |
| 137 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) | Metre | 400 | 303.65 | 1,21,460 |
| 138 | Overhead informatory road signage | Sqm | 70 | 5,609.55 | 3,92,668.5 |
| 139 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 400 | 951 | 3,80,400 |
| 140 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. | Sqm | 100 | 1,719 | 1,71,900 |
| 141 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 5 | 5,781.35 | 28,906.75 |
| 142 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 10 | 1,913.75 | 19,137.5 |
| 143 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 10 | 1,500.05 | 15,000.5 |
| 144 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 10 | 299.35 | 2,993.5 |
| 145 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. | Each | 10 | 886.25 | 8,862.5 |
| 146 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia | Each | 22 | 6,119.15 | 1,34,621.3 |
| 147 | 32 mm dia | Each | 20 | 90.95 | 1,819 |
| 148 | 40 mm dia | Each | 2 | 104.35 | 208.7 |
| 149 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 18 | 1,411.15 | 25,400.7 |
| 150 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | 15 | 146.3 | 2,194.5 |
| 151 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | 15 | 573.6 | 8,604 |
| 152 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in- charge. | Each | 6 | 7,004.45 | 42,026.7 |
| 153 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | Each | 18 | 16,100.4 | 2,89,807.2 |
| 154 | 25 mm nominal dia Pipes | Metre | 200 | 408.55 | 81,710 |
| 155 | 15 mm nominal dia Pipes | Metre | 120 | 441.15 | 52,938 |
| 156 | 20 mm nominal dia Pipes | Metre | 120 | 513.75 | 61,650 |
| 157 | 25 mm nominal dia Pipes | Metre | 120 | 626.05 | 75,126 |
| 158 | 32 mm nominal dia Pipes | Metre | 120 | 712.75 | 85,530 |
| 159 | 40 mm nominal dia Pipes | Metre | 60 | 559.2 | 33,552 |
| 160 | 50 mm nominal dia Pipes | Metre | 100 | 811.85 | 81,185 |
| 161 | 80 mm nominal dia Pipes | Metre | 200 | 1,990.4 | 3,98,080 |
| 162 | 40 mm dia nominal bore | Metre | 150 | 725.15 | 1,08,772.5 |
| 163 | 50 mm dia nominal bore | Metre | 150 | 893.2 | 1,33,980 |
| 164 | 40 mm nominal bore | Each | 6 | 707.3 | 4,243.8 |
| 165 | 50 mm nominal bore | Each | 4 | 878.25 | 3,513 |
| 166 | 80 mm nominal bore | Each | 6 | 2,227.6 | 13,365.6 |
| 167 | 25 mm nominal bore | Each | 20 | 399.15 | 7,983 |
| 168 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre 40000 | — | 9.7 | 3,88,000 |
| 169 | 15 mm nominal bore | Each | 20 | 434.2 | 8,684 |
| 170 | 15 mm nominal bore | Each | 20 | 715.05 | 14,301 |
| 171 | 15 mm nominal bore | Each | 20 | 594.75 | 11,895 |
| 172 | 15mm nominal bore | Each | 20 | 500.35 | 10,007 |
| 173 | 300 mm dia. R.C.C. pipe | Metre | 245 | 902.05 | 2,21,002.25 |
| 174 | For pipes 100 to 250 mm diameter | Each | 3 | 683.7 | 2,051.1 |
| 175 | Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar | Each | 10 | 576.6 | 5,766 |
| 176 | Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). | Kg | 10 | 357.9 | 3,579 |
| 177 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in- charge (Door handle, lock and stopper etc.to be paid separately). | Sqm | 30 | 4,540.7 | 1,36,221 |
| 178 | Upto 10 mm depth and 10 mm width | Metre | 100 | 177 | 17,700 |
| 179 | With average thickness of 120 mm and minimum thickness at khurra as 65 mm. | Sqm | 50 | 1,522.95 | 76,147.5 |
| Schedule total | ₹6,10,95,882.02 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TNN-35B-WorksDSR-UMB-2026-27.pdf
ATTACHMENT
AdcanceCorrectionslips1234567891011andMasterPolicyforDisputeRedressal.pdf
ATTACHMENT
AdvanceCorrectionSlipofGCC-2022PartII.pdf
ATTACHMENT
SafetyInstructionatWorksSite.pdf
ATTACHMENT
GeneralConditionsforcivilworks.pdf
ATTACHMENT
SpecialConditionforOT-210.pdf
ATTACHMENT
NIT-35-UMB-26-27.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .