Grant:- Nirmal Gujarat 2.0

NAME OF WORK :- Development Of Aspiration Public Toilet Different- different Location in Bhuj Nagarpalika area , Bhuj-Kutchh

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Excavation for foundation upto 1.5 m depth including sorting out and stacking

48.99 of useful materials and disposing off the excavated stuff upto 50 Meter 122.94 CMT

lead.(A) Loose or soft soil.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6-

15.39 hand broken stone aggregates 40 mmnominal size) and curing complete 3095.25 CMT

excluding cost of formwork in (A)Foundation and Plinth

Providing and laying controlled cement concrete M.200 and curing complete

3.65 excluding the cost of formwork and reinforcement for reinforced concrete work 5025.66 CMT

in (A) Foundations, footings, Base of columns and Mass concrete.

Uncoursed rubble masonary with hard stone of approved quality in foundation

and plinth in cement mortar 1:6 (1cement : 6 course sand) etc. complete.

Providing and laying controlled cement concrete M.200 and curing complete

4.21 excluding the cost of formwork and reinforcement for reinforced concrete work 9531.05 CMT

Providing and laying controlled cement concrete M.200 and curing complete

excluding the cost of formwork and reinforcement for reinforced concrete work

in © Slabs,landing,shelves,Balconies Lintels, Beams, having C/S area

Filling in plinth with sand under floors including watering

ramming,consolidating and dressing etc. comp.

Coursed rubble masonry with stone of approved quality in foundations and

plinth in Cement Mortar 1:4 (1-Cement : 4-coarse sand) etc. complete)

Coursed rubble masonry with stone of approved quality in foundations and

13.95 plinth in Cement Mortar 1:4 (1-Cement : 4-coarse sand) etc. complete) 3977.31 CMT

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Precast concrete block masonry (including quoin blocks jamb blocks closer

etc.) with solid concrete blocks of approved size made of cement concrete

1:3:6 mix (1- Cement : 3 coarse sand: 6- graded stone aggregates of 20 mm

and down grade) in foundation and plinth cement morter 1:6

Providing and laying ordinary cement conctere M20 (1 cement :1.5 coarse

sand:3 stone agg.20mm nominal size) and curing comp.incl.cost of form work

in sill and sides (R.C.C.Band) but.excl.the cost of reinforcement.

Providing and laying ordinary cement conctere M20 (1 cement :1.5 coarse

sand:3 stone agg.20mm nominal size) and curing comp.incl.cost of form work

10.26 in sill and sides for R.C.C Lintel incl. Finishing smooth with curing 7272.46 CMT

comp.incl.cost of form work but.excl.the cost of reinforcement. (R.C.C.Band)

Providing and laying ordinary cement conctere M20 (1 cement :1.5 coarse

sand:3 stone agg.20mm nominal size) for reinforced concrete chajjas not

excedding 10cm. thickness upto floor two level including finishing the

exposed surfaces with cement mortar 1:3 (1Cement : 3 fine sand) to gove a

smooth surface centering and form work and curing complete excluding

cost of reinforcement.G.F.

Providing and laying ordinary cement conctere M20 (1 cement :1.5 coarse

sand:3 stone agg.20mm nominal size) and finishing smooth with curing etc.

10.94 complete including the cost of form work butexcluding the cost of 6160.32 CMT

reinforcement for R.C.C. work in Slabs having more than 10 cm & :upto 13 cm

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

Providing and fixing 35 mm thick fiber glass shutter with 1.5 to 2.0 mm thick

fibre extinguishing grade FRP skin in raised panel design having extra

reinforcement on sides and edges and in Gel coat finish. The core of the

sutter is to be filled up with injected fibre exitinguishing grade polyurethane

24.89 foam done in situ along with embedded wooden pieces for stiffening and also 1269.63 SMT

for taking hinges and fixtures. The whole shutter to be water proof,

weatherproof, termite proof and resistance to mild acid / Alkali resistance,

including cost of hinges, necessary screws and alluminum fixtures and

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt

kg/m, vertical member of size 122.20mm x 31.75mm x

1.50mm @1.398 kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical

member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with

5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc complete for window.

Providing and fixing in position collapsible steel shutters with vertical channels

20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and

2.07 bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete 6071.50 QTL.

with bolts, nuts, locking arrangements, stoppers handles including applying a

priming coat of read lead paint.

Providing and fixing M.S. grills of required pattern to wooden frames of

81.00 windows etc. with M.S. flats at required spacings and frame alround, square or 109.24 KG

round bars with round headed bolts and nuts or by screws (A)Plain Grill.

Providing 15mm. thick cement plaster in single coat on fair side Brick/concrete

362.77 walls for interior plastering upto floor two level and finished even and smooth in 180.40 SMT

:C.M.1:3 (1cement:3sand) with 1x1 cm grooves G.F.

Providing 10mm. thick cement plaster in single coat on fair side Brick/concrete

walls for interior plastering upto floor two level and finished even and smooth in

:C.M.1:3 (1cement:3sand) finishing plaster in single coat on ceiling and sofits

of stairs upto floor two level and finished even and smooth G.F.

Providing 20 mm thick double coat mala cement plaster on interior brick /

concrete work for plastering comprising of base coat of 12 mm thick cement

171.10 plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 283.95 SMT

mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete.

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

67.28 existing flooring by adhesive material including dismentaling of existing flooring 1467.72 SMT

and jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers

11.65 of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse 1195.02 SMT

sand) and jointed with white cement lurry.

Providing and laying 30cmx45cm size coloured glazed tiles 6mm thick in

66.27 skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 1127.48 SMT

3-coarse sand) and jointed with white cement slurry

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand

62.64 : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished 290.63 SMT

with a floating coat of neat cement. (B) 40mm thick.

Finishing wall with weather proof exterior emulsion paint on Texture wall

surface (two coats) to give an required shape even hade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

351.00 surface to give an even shade including throughly brushing 84.37 SMT

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including making good

the wall ceiling and floor.(G)110 mm

Providing and fixing wsh down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement Mortar

1:1 (1-Cement : 1-fine sand) (Seal and cover to be easured and paid for

separately)(A) vitreous China Pattern :(i) in white colour

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Supplying & erecting approved make self-priming domestic monoblock water

pump with 1 H.P motor, suitable for operation on 230 volts, 50c/s. AC supply

with metallic flange, and M.S. impeller delivery and following discharge (a)

40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery

Providing erecting and fixing double coated ISI water tank of required capacity

each with all necessary fittings and connection etc. complete on terrace

Constructing brick masonary chamber for under ground C.I. inspection

chamber and bends with bricks having crushing strength not less than

kg/cm2 in cm. 1:5 C.I. cover with frame (light duty) 455 mm x 455 mm. x

mm. internal dimensions, total weight of cover with frame to be not less than

38kgs (weight of cover 23kg and wt. of frame 15 kg.) R.C.C. top slab with

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregates 20mm. size)

foundation concrete 1:5:10 inside laster 15mm. thickwith cementmortar 1:3

finished smooth with a floating coat of neat cement on walls & bed concrete

etc. complete.(i) Inside dimensions, 455mm. x 610mm. and 450 mm. deep for

single pipe line.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing design

with C.I scread down or hinged grating including the cost of cutting and

making good the walls.

PProviding and fixing S.W. gully trap with C.I. grating brick masonry chamber

4.00 and water tight C.I. cover with frame of 300mm x 300mm size (inside) with 1246.92 NOS

standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type.

Providing and laying (Two level or slopes) and jointing with stiff mixture of

cement mortar in proportion 1:1 salt glazed stone ware pipes following nominal

internal diametres including testing of pipes and joints etc. complete. 150 mm

Providing and fixing cast iron spigot and socket soil,waste and venulating

pipes of the following nominal size. (B) 75mm. dia.

3.00 Providing and fixing in position cowlvent to pipes (I) 75mm. dia. 393.04 NOS

Providing and fixing screw down bib taps of following size : (B) Brass

chromium plated screw down bib tap (I) 15mm. dia.

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Providing and fixing gun metal check or non - return fullway wheel valve.

Providing and fixing gun metal check or non - return fullway wheel valve.

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including making good

the wall ceiling and floor.(A) 20mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc. including making good

the wall ceiling and floor.(A) 32mm

Providing and fixing chromium plated brass half trun flush cock of approved

quality including fixing in pipe line etc. complete.(iii) 32mm dia.

Providing and fixing C.I. Mnhole cover 0.60m x 0.45m. size having weight not

less than 35Kgs.

Providing and fixing ball cock of approved. quality as directed.(A) Copper

Metal (i) 25mm dia.

Providing and fixing wash basin with single hole for pillar tapwith C.I or M.S.

brackets painted white incl.cutting holes and making good the same

incl.32mm dia.C.P brass waste, and 15mm dia.capstan head pillar tap union .

Vitreous china flat back wash basin 550mm * 400mm size white in colour.

Providing and fixing Urinal of approved quality including connection with trap

5.00 and with integral longitudinal flush pipe.(A) Squating plate pattern white 1628.53 NOS

earthenware 550mm x 300mm.

Providing and laying Granite slab (18mm thick) slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-Coarse sand) or L.M.

5.63 1:1.5 laid over and jointed with grey cement slurry including rubbing and 2465.92 SMT

complete (Basic Granite rate shall be 250/Sft) (A) Granite slab 18mm thick

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass

6.00 mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden 859.41 EACH

pluge with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets

fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

6.00 Providing and fixing toilet paper holder.(A) C.P. Brass 427.99 EACH

Supplying & Fixing HANDICAP KIT DETAIL DESCRIPTION -Hindware Make

2.00 Matrix Set 70002 ( EWC + WashBasin) (Rail+Grab Bar) alon with all kind of 11068.59 SET

necessary fitting materials and laour etc. complete

Providing and Fixing of a Sanitary Napkin Vending Machine of Wall Monted of

Mild Steel material In use for machine.

Providing and Fixing of a Hand Dryer on Wall Monted of Brands Like

"Dolphy, Euronics, Turkeenor equvailent" and all complete.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following

25.00 type, erected on PVC / Metallic/Wooden box, single mounting base frame 485.81 PT.

covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Supply, Installation, Testing and Commissioning of suitable sweep, BEE

Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent

ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades,

2 nos. canopies, shackle kit with earthing provision, copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum

215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with

remote unit for Speed Control and all remaining accessories including safety

pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for

140 to 285 Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in Charge] (A)900 mm sweep

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

2.00 down rod erected duly painted for fan complete with proper insulation without 108.07 MTR.

leakage and earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC

slab with Making the site as original.

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

16.00 Luminaire efficacy> 85 lumens/watt , 589.84 NOS

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV

Supplying & erecting single phase approved make industrial exhaust fan

suitable for medium duty ring mounted low noise operation suitable for medium

duty having following dia size and maximum speed in RPM

[D] 450 mm dia 900 RPM

Supplying & erecting electro galvanised G.I. wire micro mesh jali cover of

2.16 grade 304 required size with suitable wooden frame duly fitted in wall outside 634.28 SMT

of exhaust fan for insect protection.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

Supply, Installation, Testing & Commissioning of following size of Grid Tied

Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy

Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and positive power tolerance

Pmax: 0/+5, Module Efficiency should be approx. 18%-21%, Normal

operating temperature 45'C, Junction Box with Waterproof IP67 & MC4

Compatible and Enclosed with Bypass diodes, 100% Electroluminescence

test to ensure error free Modules, Thep. temp. co-efficient of the PV module

shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill

factor 75% to be used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year

Avg) With 10 year Product warranty and 25 year Linear Power Warranty.,

Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p

Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1,

O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-islanding

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output

Over Current Protection Integrated, Output Short Circuit Protection Integrated,

Output Over Voltage Protection Integrated, Protection Degree: IP65, User

Interface LCD & APP,Datalogger & Communication: GPRS / Wi-Fi, Module

Mounting Structure: Seamless Box Pipe / 'C' Channel of suitable size for

rooftop solar installations with good stability agaist wind & weight load., Hot

Dipped Galvanized steel coils. suitable arrangement for base plate for

foundation , solar panel mounting, the structure should be suitable for carry

the load of solar panel,wiring, sprinkler system etc. with necessary foundation

work/wall mount, j bolt, anchor fastner etc. the nut bolt used for installtion of

stucture should be (SS 304) quality. and Balane of System with necessary

Swithgears (Suitabel size and protection of ACDB & DCDB), inter connecting

wiring, earthing system, lightining arrester system, all liasoning work with

various gov. dipartment like state nodal agency,DISCOM & CEIG is included

in agency scope (Excluding GEDA Application fees, Solar connectivity

Charges, Meter connectivity Charges, Meter testing Charg(A) Grid Tied Solar

Power System: 1 - 6 kW (Single phase)

Note : gst will be paid as per government rules.

Quantities Tendered Rate

Item of work Unit according to

Rate in Figure estimated quantities

I/We am/are willing to carry out the work @............... % above/below ( Percent should be written in figures and

words ) The tendered amount mentioned above amount of my /our tender works out as under

Tendered amount Rs……………………….. Tendered amount Rs………………………..

Add ……...% above Rs…………………. Deduct ……...% Below Rs………………….

(Please strike out which ever is not applicable )

All work shall be carried out as per public works department handbook and other specifications of division or as directed.

Rates quoted inclusive of clearance of sight (prior to commencement of work and at its close) in all respect

and hold good for work under all conditions , sight, moisture, weather etc

one percent labor cess will be deducted from the valued work done as per ' Bulding and other construction

work welfare cess act' G.R. No. GHR - 2005/04/CWA/2004/841/M-3 Dt. 31/01/2005

Signature of the Contractor.