UR to Residential quarter of 2nd Additional civil Judge Junior division at Machilipatnam

Brick masonry in CM (1:6) using 2nd class bricks having crush strength of not less than 35 kg/ sq.cm including cost, seigniorage and conveyance of all materials and water from approved sources to work site and all operational , incidental, labour charges such as scaffolding, mixing mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504 up to basement

Application of waterproofing system with two coats of Polyurethane blended Bituminous waterproof coatingsystem complies with ASTM C 836 /D 638 / DIN - 1048 over base coat of High durable cementitious acrylic based waterproofing systems (polymer primer) making 3 coats in total, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work to the satisfaction of Engineer in charge

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Ornamental Plastering 12 mm thick in single coat with C.M (1:3) proportion with dubara sponge finish including cost and conveyance of all materials and water from approved sources to work site and all operational, Incidental, labour charges such as mixing mortar, curing etc., complete for finished finished item of work for patches to ceilings

Plastering 20 mm thick in single coat with C.M (1:4) proportion with dubara sponge finish including cost and conveyance of all materials and water from approved sources to work site and all operational, Incidental, labour charges such as mixing mortar, curing etc., complete for finished finished item of work

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for:-Internal Colouring - Providing Putty to Internal walls

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum.It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame 1 sqm 3030 (BMT-N.88)

Supplying and fixing of Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mmthick conforming to IS:2202 to the existing door frames including cost and coveyance of all materials such as Hinges, fixtures etc. and all labour charges for fixing the shutter and fixtures in postion etc. complete as directed by the Engineer-in-Charges.

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge

Painting to new walls in two coats with acrilic emulsion paint interior grade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting to old walls with two coats of acrilic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting to walls with 2 coats of acrilic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls

Painting in 2 coats of ready mixed first quality synthetic enamel paint of approved brand and shade for old wood work including cost and conveyance of all materials to work site and all operational , incidental, labour charges etc., complete for finished item of work as per SS 1207 & 1212

Painting in 2 coats of ready mixed first quality synthetic enamel paint of approved brand and shade for old iron work including cost and conveyance of all materials to work site and all operational , incidental, labour charges etc., complete for finished item of work as per SS 1207 & 1212

Painting to new wood work and flush shutters with lumppum finish in 2 coats of ready mixed first quality synthetic enamel paint of approved brand and shade over one coat of wood primar for new wood work including cost and conveyance of all materials to work site and all operational , incidental, labour charges etc., complete for finished item of work as per SS 1207 & 1212

Supply and fixing of SS fly proof mesh with teak wood reeper of size 30x12mm size over the existing window frames including cost, conveyance of all materials such as screws,nails etc. and labour charges for fixing in position etc; complete.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated and all labour charges for fixing in position etc. complete

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock