Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC | ₹37.2 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹37.4 LRejected-Finance GRAM POST KAPKOT DISTRICT BAGESHWAR UTTARAKHAND | BAGESHWAR | UTTARAKHAND | 263619 | ₹37.4 L | L2 | Rejected-Finance SECOND LOWEST BIDDER |
| 3 | L3₹38.5 LRejected-Finance | ₹38.5 L | L3 | Rejected-Finance THIRD FOURTH LOWEST BIDDER |
| 4 | L4₹39.7 LRejected-Finance BAGESHWAR UTTARAKHAND UT | BAGESHWAR | UTTARAKHAND | 263619 | ₹39.7 L | L4 | Rejected-Finance FOURTH LOWEST BIDDER |
| 5 | L5₹39.9 LRejected-Finance BAGESHWAR UTTARAKHAND UT | BAGESHWAR | UTTARAKHAND | 263619 | ₹39.9 L | L5 | Rejected-Finance FIFTH LOWEST BIDDER |
| Sl No | Description | Qty | Unit | ganga singh L2 | Shekhar Chandra L3 | PRITAM CONSTRUCTION L6 | RAJENDRA RAWAT L4 | MAA KOKILA CONSTRUCTION L1 | Navin Singh Parihar L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Reinforcement for R.C.C. Work Using Thermo-Mechanically Treated Bars | 4,453.61 | kg | 77.7 ₹3.5 L | 85 ₹3.8 L | 85 ₹3.8 L | 77.69 ₹3.5 L | 84 ₹3.7 L | 86.82 ₹3.9 L |
| 2.00 | Centring and shuttering including strutting, ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. | 100.62 | sqm | 10 ₹1,006.20 | 500 ₹50,310 | 200 ₹20,124 | 530.51 ₹53,379.92 | 250 ₹25,155 | 150 ₹15,093 |
| 3.00 | Centring and shuttering including strutting, ropping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. | 64.68 | sqm | 10 ₹646.80 | 500 ₹32,340 | 200 ₹12,936 | 692.54 ₹44,793.49 | 300 ₹19,404 | 200 ₹12,936 |
| 4.00 | RCC work 1:1.5:3 (1 cement : 1.5 c/sand :3 stone agg. 20 mm size) in walls (any thickness), plinth and string courses, columns, pillars, piers, abutments, posts & struts etc. upto floor five level ex. cost of c/shuttering, finishing and reinf. | 5.93 | cum | 7,818.72 ₹46,365.01 | 6,000 ₹35,580 | 9,000 ₹53,370 | 7,818.72 ₹46,365.01 | 7,500 ₹44,475 | 7,817.79 ₹46,359.49 |
| 5.00 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) | 26.89 | cum | 6,560.14 ₹1.8 L | 5,000 ₹1.3 L | 7,000 ₹1.9 L | 6,560.14 ₹1.8 L | 7,100 ₹1.9 L | 7,331.05 ₹2.0 L |
| 6.00 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) | 47.96 | sqm | 652.02 ₹31,270.88 | 600 ₹28,776 | 500 ₹23,980 | 652.02 ₹31,270.88 | 500 ₹23,980 | 651.94 ₹31,267.04 |
| 7.00 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat ofapproved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 1,281.3 | kg | 140.62 ₹1.8 L | 140 ₹1.8 L | 161 ₹2.1 L | 140.62 ₹1.8 L | 130 ₹1.7 L | 140.6 ₹1.8 L |
| 8.00 | Providing and fixing M.S. grills of required pattern in frames MS grills fixed to steel windows by welding. | 384 | kg | 157.84 ₹60,610.56 | 160 ₹61,440 | 180 ₹69,120 | 157.84 ₹60,610.56 | 130 ₹49,920 | 157.81 ₹60,599.04 |
| 9.00 | Centering and shuttering i/c strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. | 170.97 | sqm | 410 ₹70,097.70 | 720 ₹1.2 L | 200 ₹34,194 | 740.88 ₹1.3 L | 500 ₹85,485 | 740.79 ₹1.3 L |
| 10.00 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 36.04 | cum | 8,288.83 ₹3.0 L | 7,200 ₹2.6 L | 9,700 ₹3.5 L | 8,288.83 ₹3.0 L | 8,500 ₹3.1 L | 9,262.89 ₹3.3 L |
Tender Value
₹46.7 L
EMD Value
₹93,400
Closing Date
7 Apr 2025, 12:00 pmClosed
EE, RWD DIVISION BAGESHWAR
EE, RWD DIVISION BAGESHWAR
Major renovation of 04 classrooms and construction of 02 laboratories in Government Inter College Sailani.
2025_RES_81772_1
1558/ETENDER/RWD/2024-25 DATE 21-03-2025
Open Tender
Civil Works - Buildings
270 days
BAGESHWAR
Please refer tender documents.
1 document required · 1 mandatory
₹4,720
LEKHASHIRSH 0515008000100 and GST 05AAAGR0664Q1ZW
₹93,400
23 Jan 2026
22 Mar 2025
7 Apr 2025
22 Mar 2025
7 Apr 2025
22 Mar 2025
Amount
Reinforcement for R.C.C. Work Using Thermo-Mechanically Treated Bars
Centring and shuttering including strutting, ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Centring and shuttering including strutting, ropping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.
RCC work 1:1.5:3 (1 cement : 1.5 c/sand :3 stone agg. 20 mm size) in walls (any thickness), plinth and string courses, columns, pillars, piers, abutments, posts & struts etc. upto floor five level ex. cost of c/shuttering, finishing and reinf.
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat ofapproved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and fixing M.S. grills of required pattern in frames MS grills fixed to steel windows by welding.
Centering and shuttering i/c strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
12 mm cement plaster of mix. 1:6 (1 cement and 6 fine sand mortar.
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
P/f Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
P/Lrectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
p/f glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, 150x10 mm
Providing and fixing ISI marked oxidised M.S. handles conforming to IS 125 mm
P/F on wall face unplasticised Rigid PVC RW pipes i/c jointing with seal ring single socketed pipes --75 mm dia.
P/F on wall face unplasticised Rigid PVC RW pipes i/c jointing with seal ring single socketed pipes --110 mm dia.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories Bend 75 x75 mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories Bend 110 x110 mm
Constructing soak pit 1.20x1.20x1.20m filled with metre brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm With common burnt clay F.P.S. (non modular ) bricks of class designation 7.5
P/F G.I. pipes complete with G.I. fittings & clamps including cutting and making good the wall etc (internal work) 15 mm Dia Nominal bore
P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc (external work) 15 mm Dia Nominal bore
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15mm nominal bore.
Providing and placing on terrace (at all floor levels) litre polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of app.brand (two or more coats) to give an even shade on new work over and i/c priming coat with cement primer.
Finishing walls with textured exterior paint of required shade on New work (Two or more coats over and i/c a base coat of water proof cement paint.
Painting wood work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand.
Painting Steel work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand. Less Primer
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 square centimetres and above
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing stone rubble masonry manually/ by mechanical means including stacking ofserviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
P/L and Laying in position cement concrete of 1:4:8(1cement :4sand :8 Greded stone aggrigate 40 mm Nominal size) excluding the cost of centering and shuttering -All work
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)
Providing and fixing flat pressed 3 layer medium density particle board or gradedparticle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc.complete (frame work to be paid separately):12 mm thick
40mm th. CC flooring 1:2:4 (1 cement: 2 c/sand : 4 stone agg. 20mm size) finished with a floating coat of neat cement i/c cement slurry but excluding the cost of nosing of steps etc. complete.
P/F glass strips in joints of terrazo/ CC floors. -- 40 mm wide and 4 mm th.
Providing & fixing fly proff wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mand nuts & bolts complete.Galcanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.
S/F of 18 gauge MS sheet in panneling of window shutters including all cost complete
ganga singh (BID ID -372191)
Shekhar Chandra (BID ID -372216)
RAJENDRA RAWAT (BID ID -371445)
Navin Singh Parihar (BID ID -371909)
PRITAM CONSTRUCTION (BID ID -371834)
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_97496.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid