Providing New Bore well at infront of OHSR at Dandiganapudi Village of Nandivada Mandal Kirshna District Est Cost Rs:20.00 lakhs

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The 112 pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc., Drilling of Bore well 350/450mm dia for insertion of pipe dia of 160/175/200 mm

Cost and supply of 175 mm dia PVC blue casing pipe, but excluding GST and including Over Heads and Contractors profit @ 13.615%

Cost and supply of Slotting charges for 175 mm dia PVC blue casing pipe, but excluding GST and including Over Heads and Contractors profit @ 13.615%

Cost and supply of Supply & Fixing of 180 mm dia PVC Bore Cap., but excluding GST and including Over Heads and Contractors profit @ 13.615%

Cost and supply of Geological Survey Charges excluding taxes., but excluding GST and including Over Heads and Contractors profit @ 13.615%

Cost and supply of 90 mm dia HDPE 8kg/cm2 pipe., as per standard specifications but excluding GST, including Overheads and contractor profit @13.615 %

Supply and Transportation of 10 HP 20-24 stage.,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 4" Bore well.as per SSR-23-24 Item code Elect 5.4.5 but excluding GST, including Overheads and contractor profit @13.615 % 10HP, 20-24 Stage

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc. complete for 3 phase motor pump sets. Makes: As per list of recommended brands. but excluding GST, including Overheads and contractor profit @13.615 % above 7.5 HP to 12.5 HP with Star- Delta Starter

Cost and supply of 3-core 4 sqm Flat copper cable of ISI for submerssible motors including cost and conveyance of all matrials and all labour charges etc complete but excluding GST, including Overheads and contractor profit @13.615 %

Cost and supply of 100mm dia non return valve PN 1.6 (MPa) but excluding GST, including Overheads and contractor profit @13.615 %

Cost and supply for labour charges for fixing of motors in position etc complete but excluding GST, including Overheads and contractor profit @13.615 % Electrician

Cost and supply for labour charges for fixing of motors in position etc complete but excluding GST, including Overheads and contractor profit @13.615 % Man Mazdoor

Cost and supply for labour charges for fixing of GI Pipes and matrials in position etc complete but excluding GST, including Overheads and contractor profit @13.615 % Fitters

Cost and supply for labour charges for fixing of GI Pipes and matrials in position etc complete but excluding GST, including Overheads and contractor profit @13.615 % Man Mazdoor

Supply and Transportation of 5.00 HP Three phase ISI selfpriming Mono block IP44 motor pumpset .Makes: As per list of recommended brands as category I but excluding GST, including Overheads and contractor profit @13.615 % 5.00HP(80x80mm)