Fabrication supply installation of Laboratory Furniture and Fume Hood in Process control and analytical Laboratory Heavy Water Board Facilities Vadodara

Amount

Laboratory-working Benche (WB), with TOP black granite Size (in mm) = L 2000× W 900 ×H 750 made up of CRCA/GI steel; Epoxy Powder Coated, with Under Cabinets Drawers and Shutters to be fabricated and fixed at first floor in laboratory. Work top 18-20 mm thick black jet granite 750 mm wide storage module with two shutters 750 mm wide storage module with three drawers Leg space with one drawer Worktop mounted electrical race way in Epoxy/GI powder coated construction with 6 & 16 A Combined Socket – 10 nos. rated 50Hz, 230 V AC ; as per Annexure-2 DRG. No. SK –6002 Sheet 1 and Sheet 2 along with detailed note.

Laboratory-working Benches (WB) including corner bench, with TOP Black granite, in L-shape as per Annexure-2 DRG. No. SK –6002 Sheet 1 and Sheet 2 along with detailed note. Size (in mm) L 4450 (north to south) and 2700 (East to West) × W 900 ×H 750; made up of CRCA/GI Steel, Epoxy Powder Coated, with Under Cabinets Drawers and Shutters with Drawers and Shutter – Length 750 mm (03 Nos) and 900mm (04 Nos.) as per drawings Basic cabinet should have 1 x drawer, 2 x shutters, 2 x Shelf (Height Adjustable). Worktop mounted electrical race way in Epoxy/GI powder coated construction with 6 & 16 A Combined Socket – 12 nos. rated 50Hz, 230 V AC ; 03 Way Water Tap (Bench Mounted) and PP Sink (550×350×250)mm

Double wall Metallic, Powder coated Fume Hood without blower, ducting etc. (as per Annexure-2 DRG. No. SK –6002 Sheet 1 and detailed note.Laboratory fume hoods shall compliant with the specification as stated in the SEFA 1 – 2002 (Scientific Equipment & Furniture Association) Standard. Fume Hood over all Dimension – Length = 2400mm x Height = 2300mm, Depth –950mm, Fume hood (with base) structure consisting of Structure frame in 2.0 mm thick MS CRCA/GI steel construction Upper Unit Constant Exhaust type Epoxy Polyester Powder Coated (overall size L=2400mm, D=950mm, H=1350mm with other facilities consisting of:- Fume Hood (Upper Unit) structure with Epoxy powder coated internal size :- L=2100mm, D=800mm, H=1200mm. Inner lining, rear baffles and top baffles in 6.0 mm thick phenolic resin construction. Sash-vertical sliding 5mm thick toughened glass; 6/16 amps Non Modular single phase 'North west' or Anchor or equivalent make socket with 16 amps MCB (05 Nos.); Main Switch: MCB (02 pole with suitable rating) Respective internal wiring terminated at fume hood top at rear end for further connection NO-NC switch for blower starter Light fixures – LED light 4 feet (02 Nos.) with switches Jet black Granite -18/19 mm dished work surface with 12 mm thick ply backing having provision to fix Drip cup. UTILITY SERVICES - Remote valves on front fascia and spout on the inside wall. (All utility line shall be terminated at rear side on top /bottom of fume hood for further onnection) ALL UTILITY VALVES RHS Panel mounting Valves for Water (1 No.); Panel mounting Valves for Nitrogen (1 No.); Panel mounting Valves for Air (2 No.); Panel mounting Valves for LPG (2 No.); Chiller In/Out Line (Insulated) with Valves (01 No.) All the valves should be needle type with rating for ≥ 200 Kg/Cm2 Fume Hood Base L=2400mm, H=900 mm (1 No.); Damper (1 No.) Fume hood interior surfaces –PP coating with chemical resistance and fire retardancy.; DOL starter for motor Fume hood Under structure Fabricated out of heavy gauge rectangular shape hollow pipes in GI construction duly finished with corrosion resistant specialty coatings. Fume hood under cabinet Detachable design general purpose twin cabinets fabricated out of MS CRCA/GI steel consisting of - Twin doors in double wall const; Flushed type recessed handle; 110 0 special design door hinges; 1 No. fixed shelf Recessed base frame in heavy duty MS CRCA/GI steel const. Twin castors for easy removal of the cabinet, Inner surface should have 6.0 mm thick phenolic resin lining construction apart from epoxy coating. Under cabinet should be connected with the exaust blower for removal of vapours. Fume-Hood should be in ready to use condition, inclusive of necessary, blower, motor, ducting, valves, tubing, electrical fittings and wiring.

Table with metallic base and top (as per DRG. No. SK –6002 Sheet 1 and Sheet 2 with dimensions as described in drawing) to place Hot oven. Size (in mm) : 1000 L× 750W × 750 H Table Top 8-9 mm thick plate; Metal shelf 3-4 mm thick plate Frame: MS CRCA/GI epoxy coated frame 40 mm× 40mm × 2mm

Space Plus Design Labs Pvt. Ltd. (BID ID -3300099)