REPAIR REPLACEMENT OF LT DISTRIBUTION LINE AND OTHER CONNECTED WORKS UNDER AOR OF AGE EM AT GANDHIDHAM SIYOT KHAVDA AND BHUJ UNDER GE A BHUJ

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc for laying of cables, erection of poles, struts/ stays etc not exceeding 10 sqm on plan and getting out in soft loose soil complete all as specified and directed.

Returning, filling in, including spreading leveling watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils complete all as specified and directed.

M & L for sand filling in trenches for cushioning of LT cables punning after filling complete as specified and as directed. Note: Punned thickness shall only be measured and paid

Supply and lay un-reinforced precast concrete cable cover , class , LV , Type I flat size 250 x 150 x 40 mm laid dry in treches over under ground cables complete all as specified and directed.

S & F GI pipe, light grade, of size 50 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection complete all as specified and directed.

S & F GI pipe, light grade, of size 40 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection.

Supplying ,Laying, jointing and testing new XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed of size 3..5C core 25 sqmm

- do- as per Item 8 here in above but of size 4C core 16 sqmm complete all as specified and directed.

- do- as per Item 8 here in above but of size 3.5 core 35 Sqmm complete all as specified and directed.

M & L for Disconnecting, taking out, removing old existing unserviceable LT underground cable of any size complete all as specfied and directed

Material and labour for bring the van mounted full automated underground cable fault locator machine at site for find out HT/LT cable fault in underground completely and detection of phase fault location in under ground cable complete all as specified and directed. Note: (a) Fault machine,cable & T&P required shall be arranged by the contractor. (b) Cable jointing kit for LT is measured separately

Supply and fix aluminium lugs of following size complete all as specified and directed.

(a) 16sqmm

(b) 25sqmm

(c) 35sqmm

(d) 50sqmm

(e) 70sqmm

(f) 120sqmm

(g) 150sqmm

(h) 185sqmm

(i) 250sqmm

Supply and fix insulation tape on all bared live conductor near panel and transformer with ISI marked tape complete all as specified and directed.

M&L for cable jointing kit LT 1.1KV straight through joint 95sqmm ,heat shrinkable type with all accessories complete all as specified and directed.

M&L for cable jointing kit LT 1.1KV straight through joint 120sqmm ,heat shrinkable type with all accessories complete all as specified and directed.

M&L for cable jointing kit LT 1.1KV straight through joint 185sqmm ,heat shrinkable type with all accessories complete all as specified and directed.

M&L for restraining of HT/LT Over head aluminium conductor of any size including taking down aluminium conductor and refixing the same conductor to insulator including aluminium binding works for connceting insulator and conductor , tighting of pin insulator , MS channel refixing of outgoing conductor ,removing all old unservicable tapping from pole complete all as specified and directed.

supply and fix Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 50mm height, 65mm dia for 550 volts grade including drill of existing MS channel for fixing of insulator , removing of existing damaged insulator complete all as specfied and directed.

Supply and fix in repiars the following items and disconnecting,taking out the old unserviceable one, including necessary replacemnet of lugs ,nuts,bolts lugs, cutting existing CRCA sheet of any size and capacity wherever reqd :-

MCCB Thermal Magnetic release,Ics=100% of Icu, Adjustable over load 0.8 to 1 In,Adjustable Short circuit current 6-10 In , 4 pole 63 Amps 16 KA complete all as specified and directed.

MCCB Thermal Magnetic release Ics=100% of Icu, Adjustable over load 0.8 to 1 In,Adjustable Short circuit current 6-10 In , 4 pole 100 Amps 16 KA complete all as specified and directed.

MCCB Thermal Magnetic release Ics=100% of Icu, Adjustable over load 0.8 to 1 In,Adjustable Short circuit current 6-10 In , 4 pole 160 Amps 36 KA complete all as specified and directed.

MCCB Thermal Magnetic release Ics=100% of Icu, Adjustable over load 0.8 to 1 In,Adjustable Short circuit current 6-10 In , 4 pole 250 Amps 36 KA complete all as specified and directed.

MCCB Thermal Magnetic release Ics=100% of Icu, Adjustable over load 0.8 to 1 In,Adjustable Short circuit current 6-10 In , 4 pole 400 Amps 36 KA complete all as specified and directed.

M&L for removing shrub and creeper on electrical pole ,electrical panel ,at substation ,chain link fencing on hardstanding PCC complete all as specified and directed.

Supply and Fix in repiar on load changeover 415V 160A with enclosure, disconncetion & taking down and reconnection with proper size of lugs complete all as specified and directed.

Maintaning of HT/LT over head lines by trimming the of tree branches tuching to the HT/LT over head conductors lines upto 03 mtr away from the live conductors surrounding area complete all as directed at site complete. Note :- cost of labours deemed to be including cutting the tree branches and depositing the tree branches 50 Mtr away from the poles complete all as specified and directed.

Dismantling of old deteriorated ACSR Conductor , of any size , any type and supply and fix aluminium conductor , steel reinforced (ACSR) , of any size, any type , as per existing one and stringing properly on the insulators and binding with aluminium wire , connectors , jumpers complete all as specified and directed. Note :- Measurement and payment shall be made by measuring horizontal distance between centres of two adjacent poles and adding 3 % for sag , jointings, jumpers etc.

Supply, erecting and fixing in true vertical position, Prestressed cement concrete pole 9 mtr long confirming to IS-1678 (latest) with minimum cross sectional area 102 mm x 152 mm at top and 102 mm x 289 mm at bottom , class - 10 ,removing of old pole to side and refixing of MS channel , restringing of conductor, providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30cm in between 2 bands and numbering of poles, and numbering of the poles shall be done with synthetic enameled painted letter of shape & size complete all as specified and directed. (Note -SSR part I clause No.19.5 & 19.52 and other relevant clauses of SSR refers for execution of work and poles shall be procured directly from the manufacturer mentioned in tender documents.)

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m in depth and not exceeding 3.0m depth for foundation, laying of cable/pipe etc or for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified & directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete for poles/struts etc including necessary formwork including watering PCC for strengthing as required complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregates) as in copings, kneelers, apex stones, bed plates, kerbs etc., water troughs and the like including weathering, slightly rounded for chamfered angles and throating including necessary form work complete all as specified and as directed.

Supply install testing,commissioning of CRI tested Copper earthing electrode of length 3 metres, 40mm dia and back fill compound of 50kgs ,and conductive gel to retain moisture should be filled layer wise and inter connceted by exothermic brazing & copper strip of size 32x6mm should be suppllied and fix upto testpoint protected by GI pipe of size 50mm dia up to test point including disconnection of old earth strip and fix to new chemical earthing, PCC earth pit of standared size as per SSR part-1 and submmision of earth results and painting of Date of test , value obtain at site and all specified and as directed.

supply and fix copper strip 32X6mm Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/GI pipe or fixed to poles or any other indicated situation for loop earthing complete all as specified and directed.

Supply and Fix of line (spiral) spacer as per IS code 1445/1977 of 1 phase 2 run of dia not less than 10mm of suitable length complete including removing old spacers complete all as specified and directed.

Supply and Fix of line (spiral) spacer as per IS code 1445/1977 of 1 phase 4 run of dia not less than 10mm of suitable length complete all as specified and directed.

Supply of digital earth clamps with elliptical clamp shape improve acess to earth cables and strips up to 50mm , measure ground resistance uto 0.05 ohms to 1500ohms and currentv lekaage from 0.5 Milli amp to 35A rms , CAT IV 600V, safety rating , Backlit display complete all as specified and directed. (Make: Megger model: DET 14C )

Supply of digital ground tester IP 54 2 and 3 pont testing, CAT IV 100V , simple one button operation, resistance measurement of 0.01 ohms to 2000ohms and earth voltage upto 100V,complete all as specified and directed.

Supply of digital clamp meter DC and AC current voltage of 600V, 600A , resistance and continuity , peak,min/max and data hold function complete all as specified and directed.

Supply of Ac non contact voltage dector 12V-1000V voltage range , visual, audiable vibration of low and medium voltage , built in bright white LED torch CAT IV 1000V, IP 67 complete all as specified and directed.

Supply of 5KV insulation resitance tester , PI, DAR, DD,SV and ramp test, , IP 65, memory stoarge ,CAT IV 600V safety rating on all terminals complete all as specified and directed.

Supply of socket tester 230V, safety rating IEC/EN61010-1:2001-02 over volatge Cat III 300V complete all as specified and directed.

Supply of screw driver set box with bulb -840 set of 5 blades complete all as specified and directed. Make :Tapira

Supply of fully insulated pliers made of high grade steel complete all as specified and directed.

Supply and demo of 3 phase highly insulated FRP telescopic earth discharge rod 11KV and HV test of 110KV, 15 feet length , each rod contain 3 section of total length 15 feet , push button type locking system, Automatic pultrusion plant, FRP pulruded with 4 sqmm copper cable complete all as specified and directed.

Supply of electrical insulating gloves pair wide range volatge of 500V to 36000 V complete all as specified and directed. (Make:reychem , Model : KlAIXYZ )

Supply and Fix class 2 insulating mat working volatge of 17000KV and with stand voltage of 30000v of size 1M X 10M Fabric print and IEC 61111:2009 including removing old unserviceable mat complete all specified and as directed.

Supply of full body safety harness with shock absorber , adjustable type, Double PP rope with heavy duty clamp as per IS 35219part-1) 2021 complete all as specified and directed.

Supply of safety helmet for men with ratchet type adjustment with adjustable chin strip as per IS 2915:1984 blue colour

Supply of electrical shoes pair with electrical shock resistant up to 11KV for 1 min , PU sole, soft , comfort with sweat absorption complete all specified and as directed.

Supply of electrican tool vest professional nylon work apron reflective multifunctional pocket hardware wrench complete all specified and as directed. Make :Stanley

Supply and distribution of 50mm crushed stone aggregate of suitable thickness at various transformer location including removing old stone layer and reuse after removing dust same complete all as specified and directed.

Supply and install of alumnium T clamp along with nut , washer, nuts, bolts of 12 nos suitabe upto size 15 to 20mm dia complete all as specified and directed.

Supply and install of alumnium PG clamp along with nut , washer, nuts, bolts of 3 nos suitabe upto size 15 to 20mm dia complete all as specified and directed.

Supply and install of alumnium Pad clamp along with nut , washer, nuts, bolts of 3 nos suitabe upto size 15 to 20mm dia complete all as specified and directed.

Supply, installation, testing and commissioning CPRI approved weather and vermin proof BUS bar LT panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3.15 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary with PCC foundation and civil work and aluminium bus bar for 3 phase & neutral of cuurent capacity 240A mounted on epoxy insulator-01 Set including sleeves as per colour coading and connecting the following :- only incoming MCCB of 160A, Thermal Adjustbale, Magetic aadjustbale , ICs=100% Icu

M&L for painting of pole by providing 6 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30cm in between 2 bands and numbering of poles, and numbering of the poles shall be done with synthetic enameled painted letter of shape & size complete all as specified and directed.

M&L for fixing, drawing 4mm dia galanized iron earth conductor between street light pole with and connceting 3 core cable from light fitting to conductor and inusulating tap should be covered over knot complete all as specified and directed.

Supply and replacement of transformer oil confirming to IS 335, having dielectric strength 60 KV completely including opening of top plate of volatge stablizer type transformer and refixing and cleaning of transformer complete all as specified and as directed.

Supply and fix of 1.5sqmm 3 core aluminium conductor from every street light fitting to OH line complete all as specified and as directed.

Supply and fixing stay assembly complete with accessories as showing in electrical plate No. 1 with 16mm dia stay rod (loop type insulator, stay strand, stay clamps and excavation, PCC will be measured and paid separately on as required basis) complete all as specified and as directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

NAGEL ENTERPRISES (BID ID -3351683)

Abhishek Enterprises (BID ID -3339628)

JAI HANUMAN CONTRACTOR (BID ID -3351586)

M/s Bombay Novelty Stores (BID ID -3340847)