Special repair to Bldg No P-128 and P-129 at AF station Suryalanka

Amount

SCHEDULE 'A'

Taking down cement or cement lime plaster, any description, on brick or stone walls including racking out joints hacking for key scrubbing down with water etc. all as specified and directed.

Demolition of Brick or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and aprons removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified

Taking down chowkats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 Sqm each complete all as specified.

M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling surface finished even and smooth with out using extra cement all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:6 finishing even and smooth with out using extra cement all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in two layers, first layer 10 mm thick in CM 1:6 and second layer 5 mm thick in CM 1:4 finishing fair and even mixed with WPC as per manufacturer's instructions all as specified and directed. (Note : Supply of water proofing compound shall be measured and paid seperately).

Supply only of integral water proofing compound of approved make all as specified and directed.

M&L for Brickwork with sub-class `B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in flooring below floor tiles etc. all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in cement mortar mortar 1:6 all as specified and directed.

M&L for joint free non Skid ceramic coloured tiles (matt finish) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in cement mortar mortar 1:6 all as specified and directed.

M&L for 100 mm high skirting with joint free non Skid ceramic coloured tiles (matt finish) 7 to 8 mm thick high area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 10 mm thick backing coat in cement mortar mortar 1:4 all as specified and directed.

M&L for Glazed ceramic coloured tiles 300 x 200 size 7 mm thick in vertical surfaces as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick backing coat in cement mortar in cement mortar 1:4 all as specified and directed.

M&L for 20-25 mm thick Kota stone slabs in floorings laid and jointed with grey cement slurry mixed with pigment to match the shade of the salb including rubbing and polishing and laid over and including 20 mm thick cement screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for 20-25 mm thick Kota stone slab as in risers of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in cement mortar 1:4, and jointed grey cement slurry mixed with pigment to match the shade of the salb including rubbing and polishing complete all as specified and directed.

M&L for rounding to the edges of stone slabs one edge as in steps, cooking platform, and other similar situations all as specified and directed.

S&F for Pressed steel frames 125 x 60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, supplied and fixed all as specified and directed.

S&F for Pressed steel frames 105 x 60mm size for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate for filling of hollow portions of door frames etc., all as specified and directed.

S&F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze etc.( with out sash bars), edges of framing plain, chamferedwith plain chamfered or rounded, mitred and rebated , edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass, wire gauge etc. ; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats all as specified and directed.

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing, Aluminium Grills and Grill Frame etc., complete all as specified and directed .

S&F for Anodised aluminium window and ventilator glazed /Gauged shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No) each shutter, hinges type B-21 100mm long (2Nos), suitable handle (1No), complete all as specified

S & F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beeds all as specified and directed.

S&F for 4 mm thick Sheet Glass, ordinary quality and glazing in square exc 0.50sqm in each pane fixed in aluminium windows all as specified and directed.

S&F for 4 mm thick Figured glass, pin head type and glazing in square n.exc 0.50sqm in each pane fixed in aluminium ventilators all as specified and directed.

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

S&F for 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

S&F for 150 mm long Aluminium alloy handles cast type anodised all as specified and directed.

S&F for 100 mm long Aluminium alloy handles cast type anodised all as specified and directed.

S&F for 75 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-22 all as specified and directed.

S&F for 300 mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F of Mild steel 300 mm ,ordinary rat & tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F for curtain rods (drapery rods) not less than 25 mm dia, anodised aluminium alloy with fixing brackets , rollers etc fixed in repairs all as specified and directed.

S&F for factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and dawings all as specified and directed

S&F of Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourr PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawing all as specified and directed.

S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., fixed in repairs complete including making good to floor all as specified and directed by Engrineer-in-Charge.

S&F for 10 lit capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed in repairs, all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash basin, white, flat back, of size 550x400 mm including brackets, cutting for and pinning in ends of brackets or errecting stand and but exclusive tap, waste fitting and waste pipe etc all as specified and directed by Engineer-in-Charge.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, all as specified and directed.

S&F in repairs of 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

S&F in repairs of Stop valves 15 mm bore, ancy type Chromium plated cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, all as specified and directed.

All as per item No. 46 above but fancy type, chromium plated with long shank and cup (Concealed type) all as specified

S&F in repairs 15 mm bore Bib taps, chromium plated, cast copper alloy, with crutch or butterfly handle,screwed down, screwed for iron pipe, brass ferrule and fixed all as specified and directed.

S&F for PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified

S&F for 20 mm outer dia 3 layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., including taking up or down steel tubing and connections all as specified and directed.

S&F for 25 mm outer dia 3 layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., including taking up or down steel tubing and connections all as specified and directed.

M&L for Preparing new or previously un treated surfases of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed.

M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exteriaor weather coat paint over a coat of primer of surfaces all as specified and directed.

M&L for preparing surfaces plastered or unplastered old surfaces of walls and applying one coats of exteriaor weather coat paint all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash all as specified and directed.

M&L for preparing surfaces plastered or unplastered old ceiling surfaces and applying one coats of white wash all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash all as specified and directed.

M&L for preparing of old surfaces plastered or unplastered surfaces of walls and applying one coats of white wash all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed.

M&L for preparation of old painted surfaces of walls and applying one coat of oil bound distemper all as specified and directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors as in soil, waste and vent pipes including dismantling of old pipes all as specified.

S&F for 110 mm bore PVC (SWR) bends any radius provided with access door, fixed in repairs all as specified.

S&F for 110 mm bore PVC (SWR) junction, single (Single T) equal or unequal provided with access door, fixed in repairs all as specified.

S&F for 110 mm bore PVC (SWR) Vent cowl fixed in repairs all as specified.

S&F for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors as in soil, waste and pipes including dismantling of old pipes all as specified.

S&F in repair for 75 mm bore PVC (SWR) bends any radius provided with access door, all as specified.

S&F in repair for 75 mm bore PVC (SWR) Vent cowl all as specified.

S&F in repair for 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement , Complete all as specified and as directed.

Taking down and removing of existing water proofing treatment of any description completely, taking down of old cement plaster if any or roughening of surfaces and cleaning the top surface of RCC slab with using wire brushes and water to remove all dust and loose particles etc complete all as spd and as directed.

M&L for rendering 15mm thick in cement mortar 1:3 on roof/ concrete surfaces with using water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement complete all as spd and as directed. (Supply only of water proofing compound/admixture shall be measured and paid separately).

Supply only of liquid waterproofing compound of approved make.

M&L for water proofing treatment with 4mm thick APP modified membrane weighing not less than 4Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 Gram/Sqm having softening point not less than 140 degree celsius, longitudinal tensile strength not less than 300 N/Sqm, tearing strength of 180 N, laid after applying a coat of Bitumen Emulsion, Primer @ 0.20Kg/Sqm over the thoroughly cleaned surfaces to be water proofed. Membrane shall then be laid with 10Cm side overlaps and 15Cm end laps completely thermo fused by flame torch application as per manufacturer's instructions. Care shall be taken to avoid wrinkles while sticking the membrane on the bitumen surface. A coat of hot blown bitumen 90/15 shall be applied on top of the membrane @ 1.20 Kg/Sqm and finally finished with solar reflective aluminium paint @ 0.10 Kg/Sqm. The water proofing membrane shall be extended upto a height of minimum 30 cm on wall and inserted by cutting groove and filling with bitumen complete all as specified and as directed.

Dismantling of water tanks of capacity exc 500 & n.exc 1000ltrs and removing to store

S&F for rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical witht hreaded top) of 1000 Ltrs capacity hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

S&F in repairs 25mm bor ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pire and fixed. (Minimum weight 455gms) complete alla as specified

S&F in repairs 32mm dia PVC waste pipe for wash hand basins all as specified

S&F in repairs 40mm dia PVC waste pipe for urinals etc all as specified

S&F in repairs 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed complete ll as specified

M&L for Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.50kg per sqm per coat complete all as specified

M&L for 10mm thick plaster in CM 1:3 on concrete surfaces of sunken portion of WC, finished the surfaces even and smooth with out using extra cement with using water proofing compoud @ 3kg by weight of cement (WPC shall be measured and paid separately)

S&F in repairs Brass chromium plated showre roses 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified

S&F Vitreous China bowl urinals, flat back of size 465 X355 X265mm whitee (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe(exclusive trap and waste pie) complete fixed in repairs

M&L in for point wiring complete with 1.5 Sqmm single core multistranded copper conductor, FRLS PVC insulated unsheathed cable 1100 volts grade fixed in and including Concealed PVC conduit, fitting and accessories, joints boxes including one 1.5 Sqmm copper FRLS PVC insulated unsheathed earth continuity conductor connected in the common earth, after wall cutting making good with Plaster and painting to match the existing surface including taking down the old wiring and fixtures complete all as specified:-

(a) One light/Bell point controlled by one switch

(b) One fan point controlled by one switch

(c) One 3 pin socket outlet 5 amps on same board controlled by one switch with 1.5 sqmm size cable

(d) One 3 pin socket outlet 5 amps controlled by one switch on independent board with 1.5 sqmm size cable.

(e) One 3 pin socket outlet, 15 amps / AC Metal Clad, controlled by one switch on independent board with 4 sqmm size cable.

S&F in replacement of Modular Bell push 6A 1 module Switch complete all as specified and as directed.

S&F in replacement of Bell, AC, 230 volts, single pole, complete all as specified and as directed.

S&F in replacement of Modular Switch 5/6 Amps, 1module 1 Way complete all as specified and as directed.

S&F in replacement of Modular Switch 15/16 Amps, 1 Module 1 Way complete all as specified and as directed.

S&F in replacement of Modular Socket 5/6 Amps, 2 Module 2 and 3 pin complete all as specified and as directed.

S&F in replacement of Modular Socket 15/16 Amps, 2 Module 2/3 pin complete all as specified and as directed.

S&F in replacement of Modular Fan Regulator Step type, 2 Module 1 Way complete all as specified and as directed.

S&F in replacement of 3 Module Cover Plate with frame and Metal Flush Box complete all as specified and as directed.

S&F in replacement of 6 Module Cover Plate with frame and Metal Flush complete all as specified and as directed.

S&F in replacement of Ceiling rose, 3 plate /PVC/ polycarbonate, isolated body complete all as specified and as directed.

S&F in replacement of 4 Feet LED Tube light of 20 Watt Batten with integrated electronic driver having THD < 20%, Burning hours not less than 50000 Hrs and aluminium housing with necessary fixing screws, and connected upto ceiling rose with flexible multicore copper cable and making Good complete all as specified and as directed.

S&F in replacement of LED Bulb of 9 Watt, 945 lmn, 6500k color Temp, B22 base Camp complete all as specified and as directed.

S&F in replacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed.

S&F in replacement of 25watt Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK072 with necessary fixing screws, and connected upto ceiling rose with flexible multicore copper cable and making Good complete all as specified and as directed. Make: Havells, Crompton, C&S, Philips, Wipro

S&F in replacement of TPN DB Double door,415v, 8 way with tray for provision of MCBs, and Dolly for earth and netural complete all as specified and as directed

S&F in replacement of SPN DB Double door, 230v, 4 way with tray for provision of MCBs, and Dolly for earth and netural complete all as specified and as directed

S&F in replacement of MCB Four Pole 40 Amps, 10 kA, C Curve complete all as specified and as directed.

S&F in replacement of MCB Double Pole 6-32 Amps, 10 kA, C Curve complete all as specified and as directed.

S&F in replacement of MCB Single Pole 6-32 Amps, 10 kA, C Curve complete all as specified and as directed.

M&L for submain wiring with two run of FRLS single core cable PVC insulated unsheathed cable 1100 volts grade 4 Sqmm copper multistranded conductor including and drawing into Concealed PVC conduit, fixed on wall, ceiling including one run of 4 sqmm FRLS PVC insulated unsheathed multistranded for earth wire connected to earth, making good, complete all as specified and as directed.(Main DB to Sub DB) Note :- Three run of 4 sqmm cable and one run of PVC Conduit shall be measured as one Rm.

All as above item No 111 but 6 Sqmm

All as above item No 111 but 1.5 Sqmm

M&L for submain wiring with three run of FRLS single core cable PVC insulated unsheathed cable 1100 volts grade 6 Sqmm copper multistranded conductor including and drawing into Concealed PVC conduit, fixed on wall, ceiling including one run of 6 sqmm FRLS PVC insulated unsheathed multistranded for earth wire connected to earth, making good, complete all as specified and as directed.(GF DB to FF DB) Note :- Four run of 6 sqmm cable and one run of PVC Conduit shall be measured as one Rm.

S&F AC metal Clad Socket with Plug and SP MCB 20 Amps complete all as specified and as directed.

S&F 24 Hrs Analaog time switch with 15 min resolution, 220-240v, 16A switching capacity, less than 1 Sec/day Quartz time accuracy complete all as specified and as directed.

M&L for Earthing complete with GI Earth Plate electrode 600x600x6mm buried directly in ground earth pit not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level, surrounded from all sides with mixture of charcoal and common salt and electrode connected with GI wire of 4 mm dia by means of nuts/bolts/ check nuts/ wahers , GI pipe light grade of 15 mm bore as protection pipe, GI Strip of length not more than 7.5 mtr and connected to test point. GI pipe 20mm dia light grade for watering, funnel with wire mesh, PCC pit and RCC (1:2:4) type B-1 for cover with 8 mm dia bar reinforcement both ways @ 140 c/c including excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as shown on electrical plate No 3 of SSR 2009 complete all as specified and as directed.

S&F in replacemnt of 3- layer PP-R Polypropylene random copolymer pipes of 32mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fixed to walls/ ceiling, including connecting it to the water tanks with necessary tank connectors, Male and female threaded connectors, complete all as specified and directed.

S&F in replacemnt of 3- layer PP-R Polypropylene random copolymer pipes of 63mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.

S&F in replacemnt of PP-R Gate valves (brass insert)32mm as per requirement of the site complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/ loose soil, for under ground electric cable, pipes etc. all as directed and specified.

Returning, filling-in, including, spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified & directed.

S&F Brass Float Valves including of size 25mm including necessary fittings and accessories for connecting the water tanks complete all as specified and as directed.

Cutting the existing GI/PVC pipe line removing the u/s pipeline connecting the PPR 32mm PP-R pipe line with necessary fittings/ reducers complete all as specified and directed.

M&L for Making connection of PP-R distribution branch with PP-R main of 16-40mm sizes by providing and fixing tee including cutting and making fusion joint etc. complete all as specified and as directed.

Total of Schedule 'A'

Schedule of Credit (Minus)Rs. 43526.00 NOTE: Bidder shall insert credit amount as rate Rs 43526.00 in Blue field under Col-5

Sub Total of Schedule of credit

M/s. P S REDDY

K VENUGOPALA SWAMY