Construction of ACR at Primary School Gujjar Pati District Baramulla.

Earth work in excavation in all kinds of soil by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld. removal of tree stumps and dewatering of trenches during execution of work..

Supply and filling of dry stone soling in foundation trenches /under floors tightly hand packed with hand ramming, dressing ,watering complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size)crushed complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size) including curing complete

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves,columns, pillars, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, complete.

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc. complete.

Centering and shuttering including strutting, propping etc. and removal of form for Beams,lintels,suspended floors, roofs,stairs, landings, balconies and access platforms complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) complete.

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length incld cost of hold fast lugs or dash fasteners complete First class Imported Kail wood including all carriages by Mechnical transport and head load complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages with head load complete.

Providing and fixing colour coated galvalume High Rib profile sheets 0.50 mm TCT (Total coated thickness) having a crest height of 28-32 mm at 195 mm and effective width of 975-1000 mm and length to suit site requirements to the purlins using self drilling and self tapping fasteners of reputed make with purlin sheet using self drilling and self tapping fasteners and fixing flashings,valleys and ridges hips of colour coated galvalume plain sheet using using self drilling and self tapping fasteners of reputed make complete and as directed.All types of steel sheets shall be load tested to satisfy 1.1 times the design wind load and coating thickness to the satisfication of the site Engineer.the fasteners shall also be load tested including cost of ridges ,hips and valleys and Eaves boarding of Pre-colour coated plain sheets of required size and thicknes complete 0.50 mm thick all inclusive.The Contractor has to submit design and drawing for approval on the sheet profile ,design and fabrication deatail before installation including all carriages with head load complete..

15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement:6 coarse sand) including all carriages complete.

Providing and applying white cement based putty 2 mm thick of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including all carriages.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm), including all carriages complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate, complete.

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including 4mm thick float glass panes for glazing of window panes,and including all anodised aluminium hardware fittings , all complete as per direction of Engineer-in-charge. First class Kiln seasoned & chemically treated hollock wood/ Imported kail wood including all carriages complete.

Providing and fixing of 3 mm thick float glass panes to door, window, and ventillator frames(fixed portion) embeded in putty and fixed with painted beadings including cost of nails etc (weighing not less than 10 kg/sqm) including all carriages complete.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages complete.

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all anodised aluminium hardware fittings complete as per directions of Engineer- in-charge and panelling with panels of :12 mm thick pre-laminated particle board (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked : including all carriages complete.

Distempering with dry distemper of approved brand andmanufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade including all carriages complete..

Providing and fixing of Anodised Alumunium Hardware fittings of approved quality and manufacture with all fittings and fixtures including all carriages with head load complete. (Sample to be got approved from the competent authority) Aldrop with Lock

Providing and fixing of 12 mm thick plywood/board(kit ply, Greenply, Century, Sarda,Mayur or equivalent) in ceiling/partition of walls or equivalent work with cost of Nails, 25 mm thick cornice, etc all inclusive including all carriages complete.

Providing wood work in frames of false ceiling , Partitions etc. Sawn and fixed in poisition in budloo wood including all carriages complete.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coats of synthetic enemal paint using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, including all carriages complete.

Providing and commisioning lighting points incld wiring for lighting points in 1.5 Sq.mm PVC insulated copper wire and 2.5 Sqmm PVC insulated multi-strand copper wire for lighting sub mains,6 amp 1 way switch,2 mm thick PVC conduit/Channel with bends,junction boxes etc ,6 amp S Pole MCB ,10 amp DP MCB,2 way DB for housing MCB and hylem sheet of ISI mark and approved make with wooden box recessed in wallls with acessories incld concelead type LED 12 watt including all carriages complete.

Providing and commissioning heating point incld wiring for heating points in 2 .5 sq.mm PVC insulated multi-strand copper wire and 4 sq.mm PVC insulated multi-strand copper wire for heating sub-mains, 16 AMP switch socket combine,,2 mm thick PVC conduit/Channel with bends, Junction boxes etc , 10 Amp S pole MCB ,2 way DB for housing MCB and hylem sheet of ISI mark and approved make with wooden box recessed in /over wallls with acessories complete including all carriages complete.

Providing and commissioning of fan point incld wiring for lighting points in 1.5 sqmm PVC insulated multi strand copper wire,1200 mm ceiling fan /225 mm exhaust fan with ceiling roses and PVC square block ,350 watt electronic fan dimmer, 2 mm thick PVC conduit/Channel with bends, Junction boxes etc, 6 mm S pole MCB ,10 amp DP MCB , 2 way DB for housing MCB for lighting circuits and hylam sheet of ISI mark and approved make with wooden box recessed in wallls with acessories complete and costs of Fan and all other material involved including all carriages complete..

Providing and fixing of service line of Required wire of reputed make and quality like Havells,anchor ,Polycab or equivalent as per the directions of site engineer. (Sample to be got approved from the competent authority) including all carriages complete.

Providing and fixing of Control Pannel with Reqired accessories of approved size and make as per the directions of site engineer. (Sample to be got approved from the competent authority) including all carriages complete..

Carriage of material by Mechanical transport from nearest approved source to site of Work incld.cost of loading and unloading complete Sand/ agg.lead-10 kms

Bricks avg lead 65KMs

Carriage of material manually headloads incld.cost of loading and unloading and stacking complete Sand/ agg.lead-400M

Bricks avg lead-400M

Taking of photographs of size 125mm x 100mm Pre Execution, During Exucation and Post Execution to be submitted with bill complete Job. (Geo tagged photographs showing Longitude and latitude)