SBM(U) 2.0 SAC Grant

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Providing CC (1:4:8) by using (M/C) 40mm size H.B.G. metal from Kethanakonda quarry including cost and conveyance of all materials to site of working machnic mixng labour charges for laying and ramming and carting etc., complete as per SS

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Footings

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Pedastal

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Columns

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Plinth Beam

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Sunshades

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Roof Beam

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, pouring concrete by tremmy, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping, laying concrete, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Roof Slab

Brick work in cement mortor (1:6) by using country bricks Jujjavaram including cost and conveyance of all material and labour charges for curring etc., complete as per SS

Plastering with cement mortor (1:3) 12mm thick including cost and conveyance of all materials and labour charges etc., complete as per SS Ceiling Fish Market Ceiling :

Plastering with cement mortor (1:4) 12mm thick including cost and conveyance of all materials and labour charges etc., complete as per SS Plastering

Providing Impervious coat to exposed RCC Roof Slab surface with C.M.(1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including charges all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junction of wall and slab etc, complete for finished item of work as per S.S.

Filling with local sand for foundation trenches as per drawing and technical specification MORTH

Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal Walls.

Painting to new iron work with synthetic enamel paint two coats over pirmary coat with red oxide paint including cost and conveyance of all materials and labour charges etc., complete

Flooring with Non - skid red or white full body Ceramic floor tiles of size 600 x 600 mm and thickness between 8 - 10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete.

Providing skirting to internal walls to 15cm height/risers of steps with Soluble salt Porcelain Vitrified Tiles Screen printed and polished of size 600 x600mm and thickness between 8-9mm 1st quality set over base coat of CM (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work

Dadooing to walls with Glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete.

Supply, delivery and fabrication of R.T.S. steel varying from 6mm to 20mm dia confirming to IS including cost and conveyance of all material cutting, bending and tying grills including cost of binding wire etc., complete as per SS

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 20mm dia PVCs Pipes

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 50mm dia PVCs Pipes

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 110mm dia PVCs Pipes

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ ends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc., complete as per S.S. 20mm dia PVCs Pipes

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ ends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc., complete as per S.S. 50mm dia PVCs Pipes

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ ends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc., complete as per S.S. 110mm dia PVCs Pipes

Supply and fixing of 40mm thick RCC Jollies of approved size and design from roof slab including cost and conveyance of all materials including all labour charges for fixing etc., complete and as directed by the department authorities.

Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm Long MAT-01781 BMW-D.01

Labour charges only for fixing Indian patternW.C with"P" or "S" trap LAB-00164 BMW-D.03

Supply & fixing of Jaquar make Auto closing system pillar cock for wash basin, Chrome plated with 7 years warranty MAT-02293 BMW-I.201

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 MAT-01804 BMW-D.33

Labour charges only Fixing flat back Bowl/ Half stall urinals with fixing C.P. Spreader and screws complete LAB-00173 BMW-D.36

a) Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tank MAT-01889 BMW-G.01

b) - do - labour charges only

Solid core membrane flush doors using rigid PVC membrane of 0.3 mm thick of different elegant shades doors - 35 mm thick

Supplying & Fixing of RCC well rings cost and conveyance of all materials and labour charges etc., Complete as directed by the departmental Authorities. Well Rings

Supplying & Fixing of RCC well rings cost and conveyance of all materials and labour charges etc., Complete as directed by the departmental Authorities. Plate

Supply and Transportation of ……. Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: As per list of recommended brands as category I. MAT-03700 b ELEC-5.4.11

Drilling of Bore well with Hand Bore set to a finished dia of 112/165/175/180 mm justify both sides in all kinds of formations suitable for hand bore set drilling such as black cotton soils, sandy and alluvial soils and insertion of PVC/PVC blue casing pipe with couplings including slotting of pipe where ever required and fixing of bore well with cap and bail plug as per directions of the department for a finished item of work including conducting yield test, crew charges, cost of consumables, transportation charges and bore development charges and all other charges required in fixation of pipe assembly, Flushing of bore with required pressure excluding cost of all required materials such as cap, bail plug, clamp sets, bolts and nuts etc., excluding all taxes , cost of PVC casing pipe, slotting charges.

Cost and supply of 175 mm dia PVC blue casing pipe per RN3

Slotting charges for 175 mm dia PVC blue casing pipe per RM

Supply & Fixing of 180 mm dia PVC Bore Cap per 1No

a) S & F 12.7 mm NP stop cock Indian makeheavy duty MAT-01810 BMW-E.01

b) - do - labour charges only LAB-00176 BMW-E.02

a)Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated MAT-02172 BMW-I.48

b) - do - labour charges only LAB-00282 BMW-I.49

a) S & F 12.7 mm .M.P couplings MAT-02173 BMW-I.50

b) - do - labour charges only LAB-00283 BMW-I.51

Supply, installation, testing and commissioning of 25mm dia Gate valve. Makes: As per list of recommended brands. MAT-04485 ELEC-9.5.51

Compression male/female threaded adaptor with SS insert D20 mm X 1/2 " MAT-08296

Double Compression elbow 20 mm 64 MAT-08302

Supply of………. ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable. Makes: As per list of recommended brands as category I ELEC-1.5.1 MAT-02748 a 1.0 Sq mm

Supply of………. ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable. Makes: As per list of recommended brands as category I ELEC-1.5.1 MAT-02748 MAT-02749 b 1.5 Sq mm

Supply of………. ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable. Makes: As per list of recommended brands as category I ELEC-1.5.1 MAT-02748 MAT-02750 c 2.5 Sq mm

Supply of ……...ISI marked WPSC (Weatherproof Single Core) ISI Aluminum Wire. Makes: As per list of recommended brands. ELEC-1.6.1

Supply of ISI marked ………. heavy grade with IS:9537-part 3 rigid PVC Conduit. Makes: As per list of recommended brands ELEC-1.2.1 MAT-02673 MAT-02673 a 20 mm outer dia (1.95 - 2.10) mm thickness

Supply of ISI marked ………. heavy grade with IS:9537-part 3 rigid PVC Conduit. Makes: As per list of recommended brands ELEC-1.2.1 MAT-02673 MAT-02674 b 25 mm outer dia (2.00 - 2.20) mm thickness

Supply of ………dia PVC Flexible Couplings for FRPP Corrugated conduit. Makes: As per list of recommended brands ELEC-1.2.5 MAT-02689 a 19/20 mm

Supply of ………dia PVC Flexible Couplings for FRPP Corrugated conduit. Makes: As per list of recommended brands ELEC-1.2.5 MAT-02695 b 25mm

Supply of…………dia PVC Junction Boxes confirms to IS : 3419 Makes: As per list of recommended brands ELEC-1.2.6 MAT-02694 a 19/20 mm

Supply of…………dia PVC Junction Boxes confirms to IS : 3419 Makes: As per list of recommended brands ELEC-1.2.6 MAT-02695 b 25mm

Supply of ………………dia PVC Bends. Makes: As per list of recommended brands ELEC-1.2.8 MAT-02704 a 19/20 mm dia 1.5mm thick

Supply of ………………dia PVC Bends. Makes: As per list of recommended brands ELEC-1.2.8 MAT-02705 b 25mm dia 1.5mm thick

Supply of …………. ISI marked Makes: As per list of recommended brands as category I.ELEC-1.8.1 MAT-02833 a 6A / 10A, 1 Way, 1 Module, Modular Switch.

Supply of …………. ISI marked Makes: As per list of recommended brands as category I.ELEC-1.8.1 MAT-02844 l 16A/6A, 1 way, Combi Socket Modular Socket with shutter

Supply of …………. ISI marked Makes: As per list of recommended brands as category I.ELEC-1.8.1 MAT-02856 g 16A / 10A, Modular Flush Fuse with Neon Indicator.

Supply of …………. Makes: As per list of recommended brands as category I. ELEC-1.8.3 MAT-02871 e 8 Modular Horizontal / Vertical Cover Frame.

Supply of …………. Makes: As per list of recommended brands as category I. ELEC-1.8.3 MAT-02872 f 12 Modular Vertical Cover Frame.

Supply of …... 10KA C/D Curve ISI Mark. Makes: As per list of recommended brands as category I ELEC-2.10.1

Supply and fixing of........ LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of >=100 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. ELEC-3.8.4