Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-Finance MBPT PLOT 58 ANCHOR HOUSE 1ST MAGAZINE CROSS STREET DARUKHANA MUMBAI MAHARASHTRA 400010 | MUMBAI SUBURBAN | MAHARASHTRA | 400010 | ₹19.0 L | L1 | Accepted-Finance Techno commercially acceptable |
| 2 | L2₹20.6 L+₹1.5 L (8.09%)Accepted-Finance | ₹20.6 L+₹1.5 L (8.09%) | L2 | Accepted-Finance Techno commercially acceptable |
| 3 | L3₹22.8 L+₹3.8 L (19.7%)Accepted-Finance | ₹22.8 L+₹3.8 L (19.7%) | L3 | Accepted-Finance Techno commercially acceptable |
| 4 | L4₹27.4 L+₹8.4 L (44.3%)Accepted-Finance 3A ST GEORGE TERRACE HASTINGS HASTINGS KOLKATA WEST BENGAL 700022 | KOLKATA | WEST BENGAL | 700022 | ₹27.4 L+₹8.4 L (44.3%) | L4 | Accepted-Finance Techno commercially acceptable |
| 5 | Rejected-Technical 29 703D D1 D2 MARAR ROAD WILLINGDON ISLAND ERNAKULAM KERALA 682003 INDIA | ERNAKULAM | KERALA | 682003 | - | - | Rejected-Technical Techno commercially not acceptable |
| Sl No | Description | Qty | Unit | SHMSHIPCARE L2 | NCGB ENGINEERING CO PVT LTD L4 | M M CARGO GEAR AND MARINE SERVICES PRIVATE LIMITED L3 | A S Moloobhoy Pvt Ltd L1 |
|---|---|---|---|---|---|---|---|
| 2.00Jobs on life boat davits and winches onboard the Vessel RM.0815 - 2 set (P & S) | |||||||
| 3.00SERVICE PART | |||||||
| 4.00D25037 Life falls of two sets to remove and renewed. New wire ship supply | |||||||
| 5.00 | D25037.1 FOLLOWING JOBS TO BE DONE AT TWO SETS OF LIFEBOAT DAVITS: ALL SHEAVES ON EACH DAVIT TO BE REMOVED TOTAL 12 SHEAVES IN LIFE BOAT DAVIT). EACH CENTRE PIN AND ALL SHEAVES TO BE CHECKED FOR CRACKS; WEAR AND TEAR AND RENEWED WHERE NECESSARY. FLOATING BLOCKS (2 NO. AT EACH LIFEBOAT) TO BE OPENED UP; SIDE PLATES (CHEEKS) TO BE POWER TOOLED/GRIT BLASTED; CHECK FOR HOLES/THINNED DOWN PORTIONS AND RENEW AS NECESSARY. AFTER LUBRICATION; ALL SHEAVES AND FLOATING BLOCKS TO BE FIT IN PLACE WITH CENTRE PINS LOCKED CORRECTLY IN POSITION. | 12 | Set | 5,865 ₹70,380 | 6,000 ₹72,000 | 5,100 ₹61,200 Lowest | 10,000 ₹1,20,000 |
| 6.00 | D25037.2 FIVE YEALY LOAD TEST AND ISSUE CERTIFICATE FOR 02 LIFEBOATS | 2 | Nos | 2,86,000 ₹5,72,000 | 75,000 ₹1,50,000 Lowest | 1,08,000 ₹2,16,000 | 1,00,000 ₹2,00,000 |
| 7.00 | D25037.3 TWO NUMBER FLOATING BLOCKS CHEEK PLATES OF EACH L/BOAT TO BE INSPECTED AND RENEWED /REPAIRED AS REQUIRED | 2 | Nos | 28,000 ₹56,000 | 4,000 ₹8,000 Lowest | 13,500 ₹27,000 | 10,000 ₹20,000 |
| 8.00 | D25037.4 LIFEBOAT CHOKE SUPPORTS FWD AND AFT TO BE RENEWED. | 4 | Nos | 12,000 ₹48,000 | 2,500 ₹10,000 Lowest | 11,280 ₹45,120 | 2,500 ₹10,000 Lowest |
| 9.00 | D25037.5 CHOKE WOODEN SUPPORT AND RUBBER PADDING TO RENEW. | 2 | Set | 8,000 ₹16,000 | 2,000 ₹4,000 Lowest | 6,300 ₹12,600 | 2,500 ₹5,000 |
| 10.00 | D25037.6 DAVIT ARM HEEL PINS TO BE REMOVED INSPECTED FOR ANY PLAY AND REPAIRED / RENEWED AS REQUIRED. | 4 | Set | - | 2,000 ₹8,000 Lowest | 17,500 ₹70,000 | 2,500 ₹10,000 |
| 11.00 | D25037.7 FWD AND AFT GRIPES WIRE ROPES AND END TURNBUCKLES (3 NO) TO BE RENEWED OF BOTH LIFEBOATS. | 2 | Set | 18,000 ₹36,000 | 3,500 ₹7,000 | 13,250 ₹26,500 | 2,500 ₹5,000 Lowest |
Tender Value
Refer Docs
Closing Date
1 Jul 2025, 12:00 pmClosed
DGM SRM
Ship Repair Materials Department Cochin Shipyard LTD Perumanoor PO
LIFE BOAT DAVITS AND WINCHES REPAIR JOBS FOR THE VESSEL RM0815
2025_CSL_238854_1
CSL/SR1/815/GePNIC/ADV/43866
Open Tender
Marine Services
Works
20 days
CSL KOCHI
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
23 Aug 2025
19 Jun 2025
2 Jul 2025
19 Jun 2025
1 Jul 2025
19 Jun 2025
19 Jun 2025 - 1 Jul 2025
Amount
Jobs on life boat davits and winches onboard the Vessel RM.0815 - 2 set (P & S)
SERVICE PART
D25037 Life falls of two sets to remove and renewed. New wire ship supply
D25037.1 FOLLOWING JOBS TO BE DONE AT TWO SETS OF LIFEBOAT DAVITS: ALL SHEAVES ON EACH DAVIT TO BE REMOVED TOTAL 12 SHEAVES IN LIFE BOAT DAVIT). EACH CENTRE PIN AND ALL SHEAVES TO BE CHECKED FOR CRACKS; WEAR AND TEAR AND RENEWED WHERE NECESSARY. FLOATING BLOCKS (2 NO. AT EACH LIFEBOAT) TO BE OPENED UP; SIDE PLATES (CHEEKS) TO BE POWER TOOLED/GRIT BLASTED; CHECK FOR HOLES/THINNED DOWN PORTIONS AND RENEW AS NECESSARY. AFTER LUBRICATION; ALL SHEAVES AND FLOATING BLOCKS TO BE FIT IN PLACE WITH CENTRE PINS LOCKED CORRECTLY IN POSITION.
D25037.2 FIVE YEALY LOAD TEST AND ISSUE CERTIFICATE FOR 02 LIFEBOATS
D25037.3 TWO NUMBER FLOATING BLOCKS CHEEK PLATES OF EACH L/BOAT TO BE INSPECTED AND RENEWED /REPAIRED AS REQUIRED
D25037.4 LIFEBOAT CHOKE SUPPORTS FWD AND AFT TO BE RENEWED.
D25037.5 CHOKE WOODEN SUPPORT AND RUBBER PADDING TO RENEW.
D25037.6 DAVIT ARM HEEL PINS TO BE REMOVED INSPECTED FOR ANY PLAY AND REPAIRED / RENEWED AS REQUIRED.
D25037.7 FWD AND AFT GRIPES WIRE ROPES AND END TURNBUCKLES (3 NO) TO BE RENEWED OF BOTH LIFEBOATS.
D25037.8 FWD AND AFT ARM OF DAVIT; GUIDE FOR FLOATING BLOCK WIRE PIN REQUIRE RENEWAL ;GUIDE FOR THE ABOVE REQUIRE SUPPORT.
D25037.9 BOTH LIFEBOAT DAVIT TO BE POWER TOOLED COMPLETELY PRIMERED AND PAINTED
D25038 Life Boat Davit winch
D25038.1 TWO LIFEBOAT WINCHES TO BE OVERHAULED. TO BE RENEWED. GEAR OIL TO BE RENEWED WITH THE OWNER’S SUPPLY. TWO NOS. GAUGE GLASS TO BE CLEANED.
D25038.2 TWO LIFEBOAT DAVIT CENTRIFUGAL BRAKES AND RATCHETS TO BE OPENED UP AND INSPECTED FOR SATISFACTORY OPERATION IN PRESENCE OF SHIP'S OFFICERS. IF REQUIRED NEW BRAKE LINING. TO BE FITTED OFF 8 MM THICKNESS. ON COMPLETION OF ABOVE JOBS BRAKE ASSEMBLES AND RATCHETS TO BE BOXED UP AND TESTED.
D25038.3 02 NO LIFE BOATS SELF LOWERING WIRES TO BE RENEWED. SIZE OF WIRE 4 MM SS NON KINKING TYPE
D25038.4 SELF LOWERING WIRE SHEAVE SUPPORT EYE TO RENEW
D25038.5 PORT/STBD SIDE HAND CRANKING HANDLE FOR DAVIT WINCH CORRODED; TO BE RENEWED APS
D25038.6 WINCH FOUNDATION TO BE REMOVED FROM PLACE FOR BOTTOM INSPECTION AND REFIT WITH NEW NUTS/BOLTS/PACKINGS
D25038.7 VENDOR TO ARRANGE FOR ALL THE ABOVE JOBS AND ALSO FIVE YEARLY SERVICING INSPECTION TESTING BY MANUFACTURER SERVICING ENGINEER AND ALSO CERTIFICATION.
D25038.10 CONDUIT BOX FOR LIFE BOAT HEAVING MOTOR TO REPAIRE
D25036.3 DYNAMIC LOAD TEST OF LIFE BOAT DAVIT WINCH BRAKE TO BE CARRIED OUT WITH A PROOF LOAD OF 1.1 TIMES THE MAXIMUM WORKING LOAD AT MAXIMUM LOWERING SPEED. 5 YEARLY SERVICING/INSPECTION/TESTING TO BE DONE AND CERTIFICATE TO BE ISSUED FOR SAME BY YARD AND WITNESSED BY CLASS/MMD SURVEYOR. OEM - NORSAFE WILL BE REQUIRED CARRY OUT SAME.
D25007.3 LIFEBOAT WINCH OPERATING HANDLES TO FABRICATE AND SUPPLY
E 25053 : LIFE BOAT DAVIT WINCH X 2 NOS
MAKE : ORIENTAL PRECISION & ENGINEERING CO.LTD. BUSAN KORE, WINCH DETAILS TYPE : BWE - 08 - 180 (PORT) BWE-08-030 (STBD) MAXIMUM DESIGN LOAD 4000 KG (39.2 KN), DAVIT DETAILS : TYPE HGD - 057 - 24 MAXI. DESIGN LOAD 5700 KG
E25053.1 1) BRAKE LININGS TO INSPECT AND RENEW IF REQUIRED. MATERIAL-NON ASBESTOS.
E25053.2 2) WINCH GEARS TO INSPECT FOR DAMAGES. GEAR CASING OIL TO RENEW. CARE MUST BE TAKEN TO AVOID DUST ETC. FROM ENTERING INTO GEAR CASE.
E25053.3 3) ONE WAY CLUTCH TO INSPECT AND FUNCTION TO SHOW TO CEO/2EO.
E25053.4 4) FOLLOWING TESTS TO BE CARRIED OUT TO THE SATISFACTION OF CEO/SUPDT. DEFECTS IF ANY TO RECTIFY. STATIC TEST 6000 KGS (58.9 KN) HOLDING CHECK WINCH STRENGHTH LOWERING TEST 2329 KG (FULLY EQUIPT.) SPEED BRAKE LOWERING HT (MIN). 1451 KGS (EMPTY) MIN 3M SLIP DISTANCE (MAX. 1 M) HOISTING TEST PORT 2348 KG FALL TAKE IN SPEED STBD 2168 KG FALL TAKE IN SPEED DYNAMIC BRAKE TEST PORT / STBD 4400 KG ( 43.2 KN) JOBS TO BE CARRIED OUT BY MAKERS SERVICE ENGINEER
MATERIAL PART
D25037 Life falls of two sets to remove and renewed. New wire ship supply
D25037.1 FOLLOWING JOBS TO BE DONE AT TWO SETS OF LIFEBOAT DAVITS: ALL SHEAVES ON EACH DAVIT TO BE REMOVED TOTAL 12 SHEAVES IN LIFE BOAT DAVIT). EACH CENTRE PIN AND ALL SHEAVES TO BE CHECKED FOR CRACKS; WEAR AND TEAR AND RENEWED WHERE NECESSARY. FLOATING BLOCKS (2 NO. AT EACH LIFEBOAT) TO BE OPENED UP; SIDE PLATES (CHEEKS) TO BE POWER TOOLED/GRIT BLASTED; CHECK FOR HOLES/THINNED DOWN PORTIONS AND RENEW AS NECESSARY. AFTER LUBRICATION; ALL SHEAVES AND FLOATING BLOCKS TO BE FIT IN PLACE WITH CENTRE PINS LOCKED CORRECTLY IN POSITION.
D25037.2 FIVE YEALY LOAD TEST AND ISSUE CERTIFICATE FOR 02 LIFEBOATS
D25037.3 TWO NUMBER FLOATING BLOCKS CHEEK PLATES OF EACH L/BOAT TO BE INSPECTED AND RENEWED /REPAIRED AS REQUIRED
D25037.4 LIFEBOAT CHOKE SUPPORTS FWD AND AFT TO BE RENEWED.
D25037.5 CHOKE WOODEN SUPPORT AND RUBBER PADDING TO RENEW.
D25037.6 DAVIT ARM HEEL PINS TO BE REMOVED INSPECTED FOR ANY PLAY AND REPAIRED / RENEWED AS REQUIRED.
D25037.7 FWD AND AFT GRIPES WIRE ROPES AND END TURNBUCKLES (3 NO) TO BE RENEWED OF BOTH LIFEBOATS.
D25037.8 FWD AND AFT ARM OF DAVIT; GUIDE FOR FLOATING BLOCK WIRE PIN REQUIRE RENEWAL ;GUIDE FOR THE ABOVE REQUIRE SUPPORT.
D25037.9 BOTH LIFEBOAT DAVIT TO BE POWER TOOLED COMPLETELY PRIMERED AND PAINTED
D25038 Life Boat Davit winch
D25038.1 TWO LIFEBOAT WINCHES TO BE OVERHAULED. TO BE RENEWED. GEAR OIL TO BE RENEWED WITH THE OWNER’S SUPPLY. TWO NOS. GAUGE GLASS TO BE CLEANED.
D25038.2 TWO LIFEBOAT DAVIT CENTRIFUGAL BRAKES AND RATCHETS TO BE OPENED UP AND INSPECTED FOR SATISFACTORY OPERATION IN PRESENCE OF SHIP'S OFFICERS. IF REQUIRED NEW BRAKE LINING. TO BE FITTED OFF 8 MM THICKNESS. ON COMPLETION OF ABOVE JOBS BRAKE ASSEMBLES AND RATCHETS TO BE BOXED UP AND TESTED.
D25038.3 02 NO LIFE BOATS SELF LOWERING WIRES TO BE RENEWED. SIZE OF WIRE 4 MM SS NON KINKING TYPE
D25038.4 SELF LOWERING WIRE SHEAVE SUPPORT EYE TO RENEW
D25038.5 PORT/STBD SIDE HAND CRANKING HANDLE FOR DAVIT WINCH CORRODED; TO BE RENEWED APS
D25038.6 WINCH FOUNDATION TO BE REMOVED FROM PLACE FOR BOTTOM INSPECTION AND REFIT WITH NEW NUTS/BOLTS/PACKINGS
D25038.7 VENDOR TO ARRANGE FOR ALL THE ABOVE JOBS AND ALSO FIVE YEARLY SERVICING INSPECTION TESTING BY MANUFACTURER SERVICING ENGINEER AND ALSO CERTIFICATION.
D25038.10 CONDUIT BOX FOR LIFE BOAT HEAVING MOTOR TO REPAIRE
D25036.3 DYNAMIC LOAD TEST OF LIFE BOAT DAVIT WINCH BRAKE TO BE CARRIED OUT WITH A PROOF LOAD OF 1.1 TIMES THE MAXIMUM WORKING LOAD AT MAXIMUM LOWERING SPEED. 5 YEARLY SERVICING/INSPECTION/TESTING TO BE DONE AND CERTIFICATE TO BE ISSUED FOR SAME BY YARD AND WITNESSED BY CLASS/MMD SURVEYOR. OEM - NORSAFE WILL BE REQUIRED CARRY OUT SAME.
D25007.3 LIFEBOAT WINCH OPERATING HANDLES TO FABRICATE AND SUPPLY
E 25053 : LIFE BOAT DAVIT WINCH X 2 NOS
MAKE : ORIENTAL PRECISION & ENGINEERING CO.LTD. BUSAN KORE, WINCH DETAILS TYPE : BWE - 08 - 180 (PORT) BWE-08-030 (STBD) MAXIMUM DESIGN LOAD 4000 KG (39.2 KN), DAVIT DETAILS : TYPE HGD - 057 - 24 MAXI. DESIGN LOAD 5700 KG
E25053.1 1) BRAKE LININGS TO INSPECT AND RENEW IF REQUIRED. MATERIAL-NON ASBESTOS.
E25053.2 2) WINCH GEARS TO INSPECT FOR DAMAGES. GEAR CASING OIL TO RENEW. CARE MUST BE TAKEN TO AVOID DUST ETC. FROM ENTERING INTO GEAR CASE.
E25053.3 3) ONE WAY CLUTCH TO INSPECT AND FUNCTION TO SHOW TO CEO/2EO.
E25053.4 4) FOLLOWING TESTS TO BE CARRIED OUT TO THE SATISFACTION OF CEO/SUPDT. DEFECTS IF ANY TO RECTIFY. STATIC TEST 6000 KGS (58.9 KN) HOLDING CHECK WINCH STRENGHTH LOWERING TEST 2329 KG (FULLY EQUIPT.) SPEED BRAKE LOWERING HT (MIN). 1451 KGS (EMPTY) MIN 3M SLIP DISTANCE (MAX. 1 M) HOISTING TEST PORT 2348 KG FALL TAKE IN SPEED STBD 2168 KG FALL TAKE IN SPEED DYNAMIC BRAKE TEST PORT / STBD 4400 KG ( 43.2 KN) JOBS TO BE CARRIED OUT BY MAKERS SERVICE ENGINEER
SHMSHIPCARE (BID ID -865506)
M M CARGO GEAR AND MARINE SERVICES PRIVATE LIMITED (BID ID -867673)
NCGB ENGINEERING CO PVT LTD (BID ID -863903)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .