Construction for Metal Cage & Soft Release Cage Bird Enclosure for Great Indian Bustred (GIB) Soft Release Facility Near Village Bhanada, Tal.-Abdasa, Dist.-Kachchh.

Name of work :-

Construction for Metal Cage & Soft Release Cage Bird Enclosure for Great Indian

Bustred (GIB) Soft Release Facility Near Village Bhanada, Tal.-Abdasa, Dist.-

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In In Words esti.Qty.

1 275.00 Excavation for foundation upto 1.5 m depth 157.33 Rupees One Hundred Cmt

including sorting out and stacking of FiftySeven Paise

useful materials and disposing off the ThirtyThree Only

excavated stuff upto 50 Meter lead.(B) Dense

2 23.60 Providing and laying cement concrete 1:3:6 (1- 3347.14 Rupees Three Cmt

Cement : 3- coarse sand : 6- Crushed Thousand Three

aggregates 20 mm nominal size) and curing Hundred

complete excluding cost of formwork in (A) FourtySeven Paise

Foundation and Plinth. Fourteen Only

3 35.10 Providing and laying controlled cement 5440.87 Rupees Five Cmt

concrete M-200 and curing complete Thousand Four

including the cost of form work but excluding Hundred Fourty

cost of reinforcement for reinforced concrete Paise EightySeven

work in footings. Only

4 37.80 Providing and laying controlled cement 5947.89 Rupees Five Cmt

concrete M-200 and curing complete Thousand Nine

including the cost of form work but excluding Hundred

cost of reinforcement for reinforced concrete FourtySeven Paise

work in plinth beams. EightyNine Only

5 8653.50 Providing TMT Bar FE 500D reinforcement 77.29 Rupees Kg.

for R.C.C. work including bending, binding SeventySeven Paise

and placing in position complete upto floor TwentyNine Only

6 240.60 Filling available excavated Earth (Excluding 136.92 Rupees One Hundred Cmt

Rock ) in trench plinth side of foundation . in ThirtySix Paise

layer not excluding 20 cm in depth NinetyTwo Only

consolidation each deposited layer by

ramming and watering etc. complete.

7 75.60 Precast concrete block masonry (including 3771.97 Rupees Three Cmt

quoin blocks jamb blocks closer etc.) with Thousand Seven

solid concrete blocks of approved size made Hundred SeventyOne

of cement concrete 1:3:6 mix (1- Cement : 3 Paise NinetySeven

coarse sand: 6- graded stone aggregates of 20 Only

mm and down grade) in foundation and plinth

cement morter 1:6.

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In In Words esti.Qty.

8 229.80 Steel work, welded in built up sections framed 9108.48 Rupees Nine Qtl

work including cutting, hoisting, fixing in Thousand One

position and applying a priming coat of red Hundred Eight Paise

lead paint. (A)In beams and joists, channels FourtyEight Only

angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common

rafters and the like.

9 1850.00 Painting two coats (Excluding priming coat) 68.57 Rupees SixtyEight Smt

on new steel and other metal surface with Paise FiftySeven

synthetic enamel paint, brushing to give an Only

even shade including cleaning the surface of

all dirt, dust and other foreign matter.

10 1850.00 Providing, supplying and fixing heavy-duty welded GI 414.10 Rupees Four Smt

bird protection mesh of 12mm × 12mm aperture size, Hundred Fourteen

manufactured from galvanized iron (GI) wire of 2.5mm

thickness, welded type, with uniform grid pattern,

having high strength, rigidity, and durability, suitable

for preventing entry of birds. The mesh shall be cut to

required size, bent, positioned, and fixed to existing

RCC/steel/masonry structure using necessary GI/SS

screws, rawl plugs, anchor fasteners, clamps, binding

wire, and supports as required. Minor supporting

framework using GI flats/angles shall be provided

wherever necessary to ensure proper fixing and rigidity.

The mesh shall be firmly fixed, properly aligned, and

secured on all edges to walls, slabs, beams, columns,

ducts, railings, or openings, ensuring no gaps for bird

entry. All edges shall be neatly finished and properly

anchored. The work shall include drilling holes in

existing structure, cutting, bending, tying, fixing,

scaffolding, safety arrangements, and installation at all

heights and levels, complete in all respects. The GI

mesh shall be corrosion-resistant with proper

galvanization, suitable for exterior use including

coastal conditions. The rate shall include cost of all

materials, labour, tools & plants, transportation,

handling, wastage, and all incidental works, complete

as per site conditions and instructions of Engineer-in-

It. Qty. Est. Item of work Tendered Rates Unit Total amount

It. Qty. Est. Item of work Tendered Rates Unit Total amount

No. but may according to

be more In In Words esti.Qty.

11 2000.00 Providing, supplying and fixing heavy-duty 101.00 Rupees One Hundred Smt

bird protection mesh of 25mm × 25mm One Only

aperture size, manufactured from UV-

stabilized high-density polyethylene (HDPE) /

nylon monofilament yarn, knotless or knotted

type, having minimum 1.0 mm to 1.5 mm

thickness, with high tensile strength, resistant

to ultraviolet radiation, weathering, moisture,

and environmental exposure, suitable for long-

term external applications. The mesh shall be

installed using a complete peripheral support

system consisting of nylon rope / stainless

steel (SS) wire rope / GI wire rope as

required, properly anchored to the structural

Rupees FourtySeven Lakh Thirteen Thousand SixtyFour Paise Thirteen Only

I/We am/are willing to carry out the work at ................ % above/below percent (Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct ……….......% Below Add ……...........% above

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The Labour cess will be deduct as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. there fore in R.C.C.

items where the reisa change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Contractor Dy. Conservator of Forest

Kachch West Division