Loading…
Loading…
Tender Value
₹5.1 Cr
EMD Value
₹4.0 L
Closing Date
25 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DEN BRIDGE
18 conditions · 4 needing a document upload
Financial Eligibility Criteria: as per Clause 10.2 of Part-I of IRSGCC-2022 and as per Railway Board Advance correction slip No.1 dated 14-07-2022 The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less: where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Financial Eligibility Criteria: As per Clause 10.2 of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) and the same is mentioned in Para No.10.2 page no. 15 of this tender document. Tenderer should attach Self-attested/ Digitally signed copy of Certificate showing minimum average annual contractual turnover as per Annexure VIB of IRSGCC-2022 (As per Advanced Correction slip No,1 dated. 14.07.2022 to GCC-2022) in Annexure - "F"Page-32 of Master Document - 1 attached to the tender
Similar Nature of work : B-V (d) : Any work consisting of steel fabrication and erection of: FOB or Steel /Composite girder Bridges or ROB with steel composite girder or industrial Shed or PF shelter (steel) or Microwave/ HT tower or replacement of steel members/ repairs on steel girder Bridges or Steel Sleepers over girder Bridges. (Authority: PCE/SCs Guidelines on Similar Nature of works, vide Lr. No. W.148/P/SNW/2025, Date: 02.12.2025)."
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender
(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the 1.1.1 Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing
Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work 1.1.2 experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Instructions to Tenderers and Conditions of Tender: Tenders are refer Annexure-I, Tender Form (Second Sheet) Part-I of IRSGCC-2022 is mentioned page No. 11 - 26 of Master Document -1 attached to the tender.
21 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-)10% (minus ten percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e. OS/Tenders/Engg)/BZA Division) as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General Instructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender document and strictly adhere to the instruction and directions given therein.
BZA Division: TBSR-Replacement of cracked/ corroded steel channel sleepers with Galvanized H-Beam sleepers 1456 Nos on various steel girder bridges in SSE/Br/BTTR and SSE/Br/I/BZA under ADEN/BR/South/BZA jurisdiction
E-03-Bridges-BZA-2026
E-03-Bridges-BZA-2026
Open
Works - General
9 Months
Krishna, Andhra Pradesh
₹0
₹4.0 L
25 Feb 2026
30 Jan 2026
12 items across 3 schedules · ₹5,08,92,413.76 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | and fixing access Trolley refuges structural steel including welding / with one coat of Chromate (IS:104) followed by one Oxide (IS:2074) with all material, labour, Note: Painting shall be relevant item. | MT | 23.00 110904.69 | — | 25,50,807.87 |
| 2 | on Bridge with Steel as per approved of running and fittings, bending of holes, cutting of rails rails, sleepers & approaches under traffic making track structure o t e : 1) Rails, Steel and all fittings will be 2)Transportation of beyond 250m of be paid separately | TRM | 920.00 996.54 | — | 9,16,816.8 |
| 3 | Galvanized H-beam materials confirming Rolled sections as per RDSO/B/1636/4/R,5&9 by Engineer-in fittings and GRSP | MT | 200.00 128900.15 | — | 2,57,80,030 |
| Anti-Skid MS / Stainless un- ballasted deck drawings, with steel fasteners as Charge, on new existing chequered including removal of old stacking near clear from all of chequered plates sleepers | — | — | — | — | |
| 4 | Steel chequered latest IS: 6911, ISS minimum 6mm thick with flat bottom and to IS: 3502, 1A with 0.8mm as per RDSO removal of existing existing Bridges. NOTE: only as per weight of | Kg | 27000.00 215.98 | — | 58,31,460 |
| 5 | of Hook Bolt 28mm RDSO Drg. no. BA- approved sources | Kg | 18200.00 119.22 | — | 21,69,804 |
| 6 | a set of 2 Nos of 30mm thick and 4 pads as per RDSO 2 to suit Insulated H approved sources lead, lift, labour, etc. complete and as instructed Note: One Set consists 25mm/30mm and 4 | Set | 1623.00 1801.58 | — | 29,23,964.34 |
| 7 | fixtures for H Beam procured from RDSO approved drawing correction slips and contractor's lead, lift, transportation etc. of Engineer in- fixture for 1 sleeper | Set | 1700.00 4835.12 | — | 82,19,704 |
| Schedule total | ₹4,83,92,587.01 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1.MasterDocument01-Oct-25_compressed.pdf
2.MasterDocument02-Apr-25_compressed.pdf
3.SCHEDULE.pdf
4.Genlconditions.pdf
5.SafetyPrecautionsatsite.pdf
6.Channelsleepersfittingsconditions.pdf
7.GalvanisationSpecifications.pdf
8.Specificationofcontrolledconcrete.pdf
9.Steelspecialconditions.pdf
10.TRDsafetyconditions.pdf
11.SplconditionslayingHBeamsleepers.pdf
13.LatestRevisedBrandslist2025.pdf
12SteelprepaymentHQLr26052022.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .